• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 B
• /
• pp.612-615
• /
• 2003

In this paper, a design of radiation detector for gamma column scanner is introduced. Distillation column is important unit in Petro-chemical industries, and its on-line diagnose is very important. To get density profile measured by the radiation transmitted through column is well method for on-line diagnose as gamma scanning. For this purpose radiation detection circuit, radiation source and mechanical system for moving source and detector are required. Conventional radiation detection circuit for this application is sensitive to electric noise because of interface between the radiation circuit and the controller for mechanical system. The radiation detection system introduced here is using loop coil instead of slip ring to remove contact noise. Radiation detection system designed here for gamma scanning consist of BGO detector, high voltage circuit, PHA circuit and FSK modem. The BGO detector is used as radiation sensor, high voltage circuit and peak height analysis circuit is essential to process the signal generated from BGO detector. Micro controller convert measured data into ASCII data. FSK modem transmit ASCII data. Transmitted ASCH data is picked up in antenna coil and processed for combined function with mechanical system. This method gives good result by isolating the controlling circuit of mechanical system from radiation detecting circuit which is sensitive to noise.

• 대한약학회:학술대회논문집
• /
• 대한약학회 2003년도 Proceedings of the Convention of the Pharmaceutical Society of Korea Vol.1
• /
• pp.278.2-278.2
• /
• 2003

A column-switching semi-micro HPLC method with fluorescence detection was developed for the direct analysis of rebamipide in human plasma. Plasma was filtered through a 0.45 $\mu\textrm{m}$ membrane filter and 5 ${\mu}\ell$ of the filtrate was directly injected onto the pre-column. After elution of the plasma proteins to waste, the retained rebamipide and internal standard(ofloxacin) were transferred to a C18 semi-microcolumn (5$\mu\textrm{m}$, 150 ${\times}$2.0mm) where they were separated using acetonitrile-1.4％ acetic acid (40:60, v/v) as mobile phase. (omitted)

• 대한화학회지
• /
• 제39권4호
• /
• pp.257-265
• /
• 1995

시중에 시판되고 있는 우유를 전처리하여 이 우유에 포함된 유리 아미노산을 dansyl-chloride로 유도체화시켜 C-18 컬럼을 이용한 역상 LC법으로 분리한 다음 표준물 첨가법으로 정량했다. 미량의 D-아미노산의 분리에서는 LC의 Column-Switching System을 이용하였으며 비키랄 컬럼을 통과한 단실 D/L-아미노산에 $Cu(N-benzyl-L-proline)_2$를 이동상에 첨가한 키랄 분리를 수행하여 L-아미노산에서 D-아미노산을 분리 정량했다. 이 방법은 우유시료 중에 존재하는 16가지 아미노산의 정량이 가능하며 이중에 12가지의 D-아미노산이 column switching 방법을 통한 키랄 분리로 정량이 가능하다. 우유 100 mL에 총 유리 아미노선이 41.00 mg 포함되어 있음을 확인했으며, D-아미노산은 D-glutamic acid가 2.05%, D-alanine 2.93%만이 포함되어 있음을 확인했다.

• 한국식품과학회지
• /
• 제22권1호
• /
• pp.88-93
• /
• 1990

GLC를 이용 N-TFA n-butyl ester유도제화에 의한 아미노산 분석시 stainless steel packed column으로 효과적인 분리를 할 수 있는 고정상을 찾기 위하여 다음과 같은 2개의 column을 개발하여 표준 아미노산의 N-TFA n-butyl ester 유도체를 분석하였다. Column 1;3.36% OV-17+3.0% SE-30 on chromosorb W HP 100-120 mesh. Stainless steel column $(2m{\times}3mm\;I.D.)$ Column 2;1% NPGS+0.5% OV-17+0.5% SE-30 on chromosorb W HP 100-120 mesh. Stainless steel column $(2m{\times}3mm\;I.D.)$ Column 1에서 histidine을 제외한 19개의 아미노산 peak가 나타났으나 alanine과 valine peak는 분리되지 않았다. Colume 2에서는 15개의 아미노산이 좋은 분리를 이루었고 column 1에서 분리되지 않은 alanine과 valine.이 잘 분리되었으나 column 1에서 분리된 tryptophan, arginine 및 tyrosine이 나타나지 않았다. 분리된 모든 아미노산은 column 1, 2를 막론하고 아미노산 주입량 $1.25{\times}10^{-3}{\mu}mole-1.0{\times}10^{-2}{\mu}mole$의 범위에서 각 아미노산 peak의 높이와 내부표시제 peak 높이와의 비에 대한 주입량으로 나타낸 검정선이 선형을 나타내었고 모두 원점을 지났다. Glutamine, asparagine 및 cystine은 column 1,2에서 모두 glutamic acid, aspartic acid 및 cysteine peak와 일치하는 것으로 보아 N-TFA n-butyl ester 유도체를 만드는 과정에서 염산에 의해 각각 glutamic acid, aspartic acid 및 cysteine으로 전환되는 것으로 사료된다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2001년도 춘계학술대회 논문집
• /
• pp.221-224
• /
• 2001

The dynamic characteristics of a hydraulic press for micro-stamping are investigated by Finite Element Analysis. This machine requires high precision in producing milli-structure of electric products such as TFT-LCD back-up light reflector. First, the modal analysis of the parts and the assembly of the hydraulic press is performed. Then, the sensitivity analysis is carried out. The results show that the bearing stiffness and the base mounting stiffness affect the specific mode shapes.

• 한국광학회지
• /
• 제19권5호
• /
• pp.365-369
• /
• 2008

정전기장 편향기를 사용하는 저전압 초소형 전자칼럼에서 전자빔 집속 적정조건에 대해 조사하였다. 일정한 전자 방출 팁 전압조건에서 소스렌즈를 이용하여 전자빔을 집속할 경우 아인젤 렌즈를 이용할 경우보다 주사면적은 컸으나 전류영상의 선명도는 낮게 측정되었다. 3차원 전산시늉 결과 소스렌즈를 사용하여 전자빔을 집속할 경우 전자빔의 초점크기와 편향이 아인젤 렌즈를 이용하여 집속할 경우보다 큰 것으로 조사되었다.

• 분석과학
• /
• 제12권2호
• /
• pp.89-93
• /
• 1999

적은 양의 시료를 분석할 수 있는 마이크로 컬럼 이온 크로마토그래피용 전도도 셀과 억압컬럼을 개발하였다. 안지름이 작은 모세관 컬럼을 사용하는 경우 이동상의 유속은 보통 $5{\sim}20{\mu}L/min$ 정도 된다. 따라서 이 경우 일반적인 전도도 셀은 사용할 수가 없기에 내부 부피가 작은 모세관 컬럼용 전도도 셀과 억압컬럼을 제작하였다. 전도도 셀은 두 개의 백금 피하주사 바늘을 안지름이 0.010 mm인 튜브 속에 넣어 간격이 $2{\mu}m$ 되게 만들었고, 억압컬럼은 Nafion 튜브를 이용하여 막-억압컬럼 형태로 개발하였다. 이 전도도 셀과 억압컬럼을 이용하여 실제 음이온들(플루오르화물, 아질산염, 질산염, 염소산염)을 분석한 결과 재현성 있고 양호한 크로마토그램을 얻었다.

• Bulletin of the Korean Chemical Society
• /
• 제26권4호
• /
• pp.529-536
• /
• 2005

Measurement of toxicologically relevant polychlorinated biphenyl (PCB) congeners such as non-ortho(IUPAC#) 77, 81, 126, 169 and mono-ortho 105, 114, 118, 123, 156, 157, 189 and di-ortho 170, 180 and polybrominated diphenyl ethers (PBDEs) such as 47, 66, 85, 99, 100, 138, 153, 154 in environmental samples become almost mandatory in several countries now. However, most of the available methods involve expensive instrumentations such as HRGC-HRMS or ECNI-LRMS, apart from expensive extraction and clean-up (with large volume of solvents) steps. A method has been devised combining the analytical separation power of PYE [2-(1-pyrenyl)ethyldimethysilylated silica] column HPLC and high-resolution gas chromatographic techniques including micro-electron capture detection (ECD) and two dimensional gas chromatograpy-ECD techniques to determine these eco-toxic substances at parts-per-trillion (ppt) levels. This combination resolves co-elution of congeners that occur in disproportionate ratios (e.g. CB-110 and -77) and allows accurate congener-specific determination of target compounds. This method is cost effective as it requires only hexane, that in small quantities (10 mL) and GC-ECD. The elution and analysis time are optimized to less man hours. This method is effectively utilized in the analysis of co-planar PCBs and PBDEs from archived solvent extracts of samples previously analyzed for pesticides and PCBs. Structure based separation of contaminant classes improves GCECD determination at ppt levels.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.28-28
• /
• 2009

Fabrications of antireflection structures on solar cell were investigated to trap the light and to improve quantum efficiency. Introductions of patterned substrate or textured layer for Si solar cell were performed to prevent reflectance and to increase the path length of incoming light. However, it is difficult to deposit conformally flat electrode on perpendicular plane. ZnO is II-VI compound semiconductor and well-known wide band-gap material. It has similar electrical and optical properties as ITO, but it is nontoxic and stable. In this study, Al-doped ZnO thin films are deposited as transparent electrode by atomic layer deposition method to coat on Si substrate with micro-scale structures. The deposited AZO layer is flatted on horizontal plane as well as perpendicular one with conformal 200 nm thickness. The carrier concentration, mobility and resistivity of deposited AZO thin film on glass substrate were measured $1.4\times10^{20}cm^{-3}$, $93.3cm^2/Vs$, $4.732\times10^{-4}{\Omega}cm$ with high transmittance over 80%. The AZO films were coated with polyimide and performed selective polyimide stripping on head of column by reactive ion etching to measure resistance along columns surface. Current between the micro-columns flows onto the perpendicular plane of deposited AZO film with low resistance.

• Geosystem Engineering
• /
• 제21권6호
• /
• pp.318-325
• /
• 2018

Eight tight sandstone reservoir samples from $He_8$ and $Shan_1$ Formations of the Sulige Gas field were selected to perform gas-water micro-displacement experiment based on authentic sandstone micro-model. The gas pressure-relief experiment was proposed for the first time to simulate the pressure change and gas-water percolation characteristics in the process of gas exploitation. The experiment results show that: (1) In the process of gas accumulation, the gas preferentially flows into the well-connected pores and throats with large radius, but rarely flows into the area without pores and throats. (2) Under sufficient gas drive, the water in pores and throats usually exists in the forms of 'thin water film', 'thick water film', and 'water column', but under insufficient gas drive, gas fails to flow into new pathways in time, so that the reservoirs with large pores and throats are high in water cut. (3) Under the same water saturation, the reservoirs with better petrophysical properties has higher gas recovery factor within unit time. Under the same petrophysical conditions, the reservoirs with lower water saturation show higher gas recovery factor within unit time. The higher the permeability, the stronger the liquid carrying capacity of reservoirs.