• Journal of the Korean Recycled Construction Resources Institute
• /
• v.6 no.3
• /
• pp.214-221
• /
• 2018

In this paper, the effects of ferronickel slag powder and admixture on the strength of VR sewer pipe were analyzed. the substitution rate was tested as a variable, and the strength development was studied through the flexural strength, compressive strength and using SEM microscopic analysis. bending strength, compressive strength results and micro analysis using SEM showed the correlation in each case. the substitution rates were 20% and 30% relative to the mass of the OPC respectively, and were substituted according to a constant ratio of ferronickel slag fine powder and mixture. when the substitution ratio was 20%, the strength development was excellent. also, bending strength and compressive strength were the best when the ferronickel slag fine powder, quicklime, gypsum and calcium chloride were used as the admixture, dense microstructural patterns appeared. the possibility of progressive strength development is shown after 28 days.

• Food Engineering Progress
• /
• v.21 no.4
• /
• pp.326-331
• /
• 2017

A cultivar (Malus domestica cv. Fuji) of apple was selected to make apple peel (AP) powder by three different powdering methods. Frozen AP was thawed and subsequently was dried or ground without drying. After AP was dried by hot-air drying at $60^{\circ}C$ or freeze-drying, the dried AP was ground using a conventional blender. Separately, the thawed AP was powered by using a cryogenic micro grinding technology (CMGT). The ground AP and three types of AP powder were extracted using deionized water, 20, 40, 60, 80, or 100% methanol, followed by vacuum evaporation. The total phenolics contents (TPC), total flavonoids contents (TFC), DPPH, and ABTS radical scavenging capacities of each extract were compared to determine an efficient powdering method. Lyophilized AP powder extract using 60% methanol showed the highest TPC and DPPH radical scavenging capacity. In contrast, 60% methanol extract of the powder by CMGT, resulting in the smallest particle, exhibited the highest TFC and ABTS radical scavenging capacity. This study suggests that the extraction yield of bioactive compounds from AP may be varied according to different powdering methods and that a new powdering process such as CMGT may be applicable to develop functional foods efficiently.

• Proceedings of the Ginseng society Conference
• /
• 1990.06a
• /
• pp.20-24
• /
• 1990

The climacteric is that phase in the aging process during which a woman passes from the reproductive to the non-reproductive stage. The signals, such as hot flashes, vaso-motoric disturbances, perspiration, stiff shoulders, emotional symptoms, are refereed to as climacteric disturbances. Treatment of climacteric symptoms centers on estrogen replacement and transquilizers, but there are many problems to be solved to use these hormones/drugs as far as dosage, duration and complications are concerned. The care of women during the climacteric years should provide relief of distressing symptoms with as high a degree of safety as possible. From this viewpoint, we used red ginseng powder to those patients with high menopausal index successfully. We studied its mechanism of action and proved that red ginseng improved the micro-circulation system via improvement of erythrocyte deferability which enhanced sex steroidgenesis consequently

• Fisheries and Aquatic Sciences
• /
• v.9 no.3
• /
• pp.115-117
• /
• 2006

A micro algal growth-enhancing polysaccharide compound was isolated from the green alga Monostroma nitidum using water extraction, molecular fractionation, a DEAE-cellulose column, and fast protein liquid chromatography using a Superose-12 column. The yield of the compound from the seaweed powder was 8.3$\times$l0$^{-3}$%. At 2 mg/mL concentration, the polysaccharide enhanced Tetraselmis suecica cell growth in f/2 medium by approximately 160%.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2003.03a
• /
• pp.689-696
• /
• 2003

In this study, ordinary portland cement, slag cement and micro cement which have been used in the construction fields were evaluated for the environmental effects and compression strength characteristics for curing solution. To find the leaching of C $r^{6+}$ characteristics in cement grouts, C $r^{6+}$ content tests were performed for the raw materials(cement powder). In addition, C $r^{6+}$ leaching tests were peformed for the homo-gel samples according to change of pH and each curing solution with the deionized water and leachate. Then, the unconfined compression strength tests were peformed with the homo-gel samples and the amount of changed C $r^{6+}$ was measured by curing solution.

• Journal of the Korean Ceramic Society
• /
• v.55 no.3
• /
• pp.285-289
• /
• 2018

We synthesized silicon carbide (${\beta}-SiC$) nanowires with nano-scale diameter (30 - 400 nm) and micro-scale length ($50-200{\mu}m$) on a porous body using low-grade silica and carbon black powder by carbothermal reduction at $1300-1600^{\circ}C$. The SiC nanowires were formed by vapor-liquid-solid deposition with self-evaporated Fe catalysts in low-grade silica. We investigated the characteristics of the SiC nanowires, which were grown on a porous body with Ar flowing in a vacuum furnace. Their structural, optical, and electrical properties were analyzed with X-ray diffraction (XRD), transmission electron microscopy (TEM), and selective area electron diffraction (SAED). We obtained high-quality SiC single crystalline nanowire without stacking faults that may have uses in industrial applications.

• Journal of the Korean Ceramic Society
• /
• v.38 no.7
• /
• pp.602-607
• /
• 2001

Zirconia powder containing 3 mol% yttria (3Y-PSZ) was casted on the cast iron substrate by plasma spraying method. Coated specimens were then heat treated at 500$\^{C}$ in nitrogen plasma. Wear tests were performed on nitrogen heat treated and non heat treated samples at temperatures from 25$\^{C}$ to 600$\^{C}$. Wear results showed that the friction coefficient and the wear loss of both the treated and the non-treated samples showed maximum value at 400$\^{C}$. These results were explained by low temperature thermal degradation due to the monoclinic transformation. Nitrogen plasma treatment significantly improved the tribological performance. The effect of nitrogen heat treatment on tribological behavior was explained by the increased micro-hardness and decreased monoclinic faction.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.379-382
• /
• 2004

Abrasive jet machining (AJM) has a large number of parameters such as powder flow rate, air pressure, diameter of abrasive, stand off distance, material hardness and fracture toughness, etc. It is not easy matter to control those parameter. To achieve high accurate machining, in this study, Taguchi method was used to select process parameters. The objective of the optimization was to get higher material removal rate (MRR). From the experiments and analysis, some process parameters were found to make efficient machining.

• Journal of Ginseng Research
• /
• v.14 no.2
• /
• pp.162-166
• /
• 1990

The climacterium is that phase in the aging precess during which a woman passes from the reproductive to the non-reporductive stage. The signals, such as hot flashes, vaso-motoric disturbances, perspiration, stiff shoulders, emotinal symptoms, are refered to as climacteric disturbances. Treatment of climacteric symptoms centers around estrogen replacement and transfuilizers, but there are many problems to be solved to use these hormones/drugs as far as dossage, duration and complications are concerned. The care of women during the climacteric years should provide relief of distressing symptoms with as high a degree of safety as possible. From this view point, we used red ginseng powder to those patients with high menopausal index successfully. We studied its mechanism of action and proved that red ginseng improved the micro-circulation system via improvement of erythrocyte reformability which enhanced sex steroidgensis consequently.

• Magazine of the Korea Concrete Institute
• /
• v.6 no.5
• /
• pp.149-157
• /
• 1994

보통 포틀랜드 시멘트와 수용성 고분자 물질인 hydroxy propyl methyl cellulose(HPMC), 미세골재 및 혼화재료를 사용하여 W/C=0.1이 되도록 물을 첨가하고 twin roll mill로 혼합 성형한 후 60일간 양생하여 고강도 시멘트 경화체를 제조하였다. 이 경화체에 대한 휨강도 및 파괴인성을 검토하였다. SiC 분말 및 백색시멘트를 첨가한 경우 휨강도는 약 100MPa정도, 탄성계수는 80-95GPa의 값을 나타내었다. 실리카흄을 첨가한 경우 휨강도는 80MPa, 탄성계수는 60GPa의 값을 나타내었다.