• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.1
• /
• pp.57-62
• /
• 2013

Because of high torque and easiness of speed control, Direct Current(DC) motors have been used for a long time. But, its applications are limited in circumstance and performance, since they contained brush and commutator. The commutation characteristic gives effect to life and performance of the DC motor. Naturally, the commutation characteristic analysis is strongly required. In this paper, With the result of finite element analysis, The inductance is calculated each rotor position and applied to the voltage equations coupled with commutation equation. Also, contact resistances of brush/commutator assembly are considered using contact area and brush width converted with commutator segments. The time derivative term in the differential equation is solved in time difference method. This algorithm was applied to 2-pole shunt DC motor. We considered commutation characteristic by changing contact resistance between brush and commutator segment.

• Journal of Korean Society of Water and Wastewater
• /
• v.17 no.4
• /
• pp.495-502
• /
• 2003

In order to modify incorrect flow data in the sewage system, the method using the stage-discharge relation and hydraulic characteristic curve of sewer pipe are applied. The modified data were verified with field measured data and the infiltration analysis using the modified data was carried out. When flowrate were measured using the flow-meter in fair weather, the stage data were comparatively consistent but velocity data were very poor for the most part. Therefore, it was recommended that sewage flowrate variation characteristic curve and infiltration were computed using the modified data on the basis of stage data. Especially, in the case of using the hydraulic characteristic curve, extrapolation results of the rainy season flowrate using regression curve on the basis of the data in fair weather were also reasonable.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2011.10a
• /
• pp.440-445
• /
• 2011

Dynamic characteristic analysis is required in developing SMT mounter system with high installation speed and position precision, because of vibration source occurred by positioning head. This paper presents the method of improving dynamic characteristic of SMT(Surface Mount Technology) mounter with finite element method and modal test. The design direction is that natural frequencies of SMT mounter must be higher than the vibration source. In addition, the effect of input shaping on residual vibration reduction is investigated by simulating the response of a first-order system.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1067-1068
• /
• 2011

This paper deals with the method of starting characteristic analysis of a single-phase line-start permanent magnet (LSPM)motor. The starting characteristic such as current, torque and is important in LSPM because of demagnetizing of the permanent magnet. In this paper, the characteristic analysis is performed using finite element method.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.9
• /
• pp.1033-1038
• /
• 2015

Complementary Filter is commonly used in signal processing method for real-time position measurement. Butterworth filter characteristic has a uniform gain in the pass band, the blocking band has a good blocking characteristics. Therefore, we propose a method of designing a complementary filter having a characteristic of Butterworth filter characteristic. By setting the appropriate filter coefficients in the simulation it appears to improve the performance of the filter. In the experiment it shows a real-time signal processing is possible by using the calculated filter coefficients in the simulation.

• Proceedings of the KIEE Conference
• /
• 2002.07b
• /
• pp.811-813
• /
• 2002

This paper deals with the design of vaccum pump using moving magnet type linear oscillaory actuator based on the design procedure and the characteristic analysis. To improve the starting characteristic, the optimum spring constant is detected and redesigned. The parameter was calculated by Finite Element Method(FEM). In order to dynamic characteristic analysis, Time difference method with voltage and kinetic equation is used. The propritey of the improved model is verified through the experimental.

• Journal of the Semiconductor & Display Technology
• /
• v.11 no.2
• /
• pp.59-62
• /
• 2012

This test method covers a procedure for measuring particle removal characteristic of equipment fan filter unit(EFFU) installed inside of semiconductor process equipments, FPD manufacturing equipments and so on. Since EFFU is a combination of air filter and the assembly of fan, motor and frame, the integrity of these parts is very important for the performance of EFFU. So a conventional particle removal test method for air filters is not suitable for EFFU particle removal performance. This test method defines an evaluation method for EFFU which is installed inside an enclosed space to remove particles that are generated inside process equipment. The particle removal performance of EFFUs is usually depending on the performance of filter media and air flow rate. To understand a performance of an EFFU, the filter media characteristic, air flow rate and the integrity of EFFU parts should be considered simultaneously. This test method is intended to demonstrate the system performance of an EFFU and successfully evaluated EFFU performance characteristics.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2005.03a
• /
• pp.362-369
• /
• 2005

Studying unsaturated soil mechanics, determination of soil water characteristic curve and permeability equation is an essential factor but it is not easy. In this research a new testing apparatus was developed to determine soil water characteristic curve and permeability equation. The testing to get saturated permeability coefficients and soil water characteristic curves for two soils was performed by using the developed testing apparatus. First, a saturated permeability testing was performed and then the testing to get soil water characteristic curve of a drying process was performed. Next, the testing to get soil water characteristic curve of a wetting process was performed. Testing results showed hysteresis phenomena between soil water characteristic curve of a drying process and soil water characteristic curve of a wetting process. The permeability equations were determined by a theoretical method where a saturated permeability coefficient and a soil water characteristic curve were used.

• International Journal of Control, Automation, and Systems
• /
• v.1 no.1
• /
• pp.127-133
• /
• 2003

This paper proposes a new numerical method to check the stability of a general class of time delay systems. The proposed method checks whether there are characteristic roots whose real values are nonnegative through two steps. Firstly, rectangular bounds of characteristic roots whose real values are nonnegative are computed. Secondly, the existence of roots inside the bounds are checked using the numerical computation of argument principles. An adaptive discretization is proposed for the numerical computation of argument principles.

• Proceedings of the KIEE Conference
• /
• 1989.11a
• /
• pp.53-57
• /
• 1989

Until now, method of equivalent circuit is generally used in analyzing the characteristic of the synchronous alternator. But this method can't apply when loads are connected to alternator. In this paper, we analyzed the load characteristic of the synchronous alternator with permanant magnet using 2-dimensional finite element method having voltage source. The loads of a alternator are battary and diodes which are used to rectify. also, we used half periodic boundary condition in the F.E.M calculation