• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 춘계학술대회 논문요약집
• /
• pp.91-91
• /
• 2004

유압시스템은 1795년 J. Bramah가 물을 작동유체로 사용한 Press를 개발해 사용한 이래 2세기 이상 인간생활의 다양한 분야에 이용되어 왔다. 초기 유압시스템은 쉽게 구할 수 있고, 저장이 용이한 물을 작동유체로 사용하였다. 그러나 물은 부식성, 낮은 점성계수로 인한 저 윤활성과 많은 누설량, 그리고 저온에서의 동결 등과 같은 문제점을 가졌다. 당시에는 물에 대한 부식성이 없는 재료나 물의 누설을 막을 수 있을 만큼의 가공기술이 부족하였으므로 이러한 물의 문제점을 해결하기 위해 1906년 Wiliams와 Janney가 물 대신 기름을 작동유체로 사용하기 시작했다.(중략)

• 대한의용생체공학회:의공학회지
• /
• 제3권1호
• /
• pp.23-30
• /
• 1982

The regimen of physical activity of the patient with coronary artery disease requires that he should not overshoot the prescribed heart rate based on his age, health and fuctional status of the heart during his exercise. The step input of work load, however, involves a great danger of overshooting. The purpose of this study was to desigil a system that makes it passible for a subject to check the overshooting. This system shows on tile H.R-meter, the amplified and filtered heart-rate signal of the subject received by the photosensor on his earlobe, puts it in the lead coinpensational circuit where it is conpared with the reference input signal(=the presfribed heart rate). The output of the lead compensational circuit works the aull meter. By means of this null meter, the subject knows whether he is overshooting the prescribed heart rate or not. He can continue the natl meter needle at the'Zero'position through the control of the speed of pedaling of the bicycle ergometer, An experimental test, made on eight men and four women in healthy condition, showed that 91. 7% of them vlaintained the stable heart rate and that the overshooting of the desired heart rate did not exceed $\pm$2BPM. According to the result of this experiment, since the heart rate feedback controller makes it possible for the subject to take the prescribed exercise based not on the work load but on the heart rate which incidentally is inexpensive, it can be made use of as the instrument for the regimen of pflysical activity by the patient with coronary artery disease.

• 전기학회논문지
• /
• 제56권6호
• /
• pp.1105-1110
• /
• 2007

This paper describes an equivalent circuit modeling of 4-port connector system. A coupled transmission line was designed and fabricated, mimicking a 4-port connector system, and then S-parameters were measured using 4 port VNA (Vector Network Analyzer). The S-parameters from measurement and from Full-wave simulator coincided quite nice. By using these S parameters, an equivalent circuit parameters for a 4-port system was obtained. The time domain response from the equivalent circuit model matched to the signals, which was measured using TDR(Time Domain Reflectometry) meter. We were also convinced that there should be enough bandwidth to get a meaningful time domain result from Fourier inverse transformation of the S parameters. In addition, we applied the conversion algorithm to the 4-port connector system, which calculates the S-parameters of a 4 port system using the data from a 2-port VNA with the other ports open. Comparison of the two data, one from measurement and the other one from the conversion algorithm, was made in this manuscript.

• 한국자동차공학회논문집
• /
• 제7권9호
• /
• pp.36-47
• /
• 1999

Three-way catalyst converter, cleaning up the exhaust gas contamination of SI engine, has the best efficiency when A/F ratio is near the stoichiometry . The feedback control using oxygen sensors in the exhaust manifold has limits caused by the system delays. So the accurate measurement of air flow rate to an engine is essential to control the fuel injection rate especially on transient condition like the rapid throttle opening and closing. To measure the rapid change of flow rates. the air flow meter for the engine requires quick response, flow reversal detection, and linearity . Tjhe proposed integration type air flow meter (IFM), composed of an ultrasonic flow meter with an integration circuit, has significantly improved the measurement accuracy of air mass inducted through the throttle body. The proposed control method estimated the air mass at the cylinder port using the measured air mass at the throttle . For the fuel dynamic model, the two constant fuel model is introduced . The control parameters from air and fuel dynamics are tuned to minimize the excursion of the air fuel ratio. As a result A/F ratio excursion can be reduced within 5% when throttle rapidly opens and closes at the various engine conditions.

• Progress in Superconductivity
• /
• 제4권1호
• /
• pp.37-41
• /
• 2002

In this work. we have designed two different kinds of Rapid Single Flux Quantum (RSFQ) OR-gates. One was based on the already developed RSFQ cells and the other was aimed to develop a more compact version. In the first circuit, we used a combination of two D Flip-Flops and a merger and in the other circuit we used a combination of RS Flip-Flops and Confluence Buffer. We tested the circuit performance by using the simulation tools, Xic and Wrspice. We obtained the operation margins of the circuit elements by a margin calculation program, and we obtained the minimum operation margins of $\pm$30%. The circuits were laid out, aimed to fabricate by using the existing KRISS Nb process. KRISS Nb process includes the $Nb／Al_2$$O_3$／Nb trilayer fabricated by DC magnetron sputtering and the reactive ion etching technique for the definition of the features. The major tools used in the layouts were Xic and L-meter.

• 디지털융복합연구
• /
• 제12권11호
• /
• pp.365-372
• /
• 2014

본 논문에서는 스마트미터를 활용한 건축물의 전력에너지 절감 및 효율화 방안에 대하여 실험하였다. 전력에너지 절감을 위해 개선된 자동역률제어시스템(APFC)을 제안하고, 수요전력의 억제(Demand Control) 방안을 제시하였다. 이는 스마트미터의 ICT 기술을 통하여 실시간 양방향으로 콘덴서 뱅킹과 차단기를 직접 제어함으로써 이루어진다. 개선된 APFC는 콘덴서 뱅킹을 보다 다양화하기 위해 이종 용량의 콘덴서를 직병렬 혼합 결선하여 구성함으로써 구축 비용을 최소화 한다. 상기 기능을 위해 Atmel사의 AVR465를 이용하여 PLC 및 Zigbee 통신기능을 갖는 스마트미터를 설계하였다. 24시간 운영되는 숙박시설에 대하여 테스트한 결과 역률은 95%이상을 유지하였고, 과보상은 발생하지 않았음을 확인할 수 있었다.

• 한국산학기술학회논문지
• /
• 제13권11호
• /
• pp.5427-5433
• /
• 2012

본 논문에서는 자동차 변속기 오일레벨을 정확하고 손쉽게 측정할 수 있는 초음파 오일레벨 측정기를 개발하고 실험을 통하여 유용성을 보였다. 초음파 프로브 구동 펄스 생성과 오일레벨 연산을 비롯한 모든 디지털 신호 처리가 하나의 FPGA에 의해서 이루어지도록 하여 측정기의 단순화와 고성능화를 이루었고, 모든 프로그램을 FPGA 프로젝트 IDE상에서 제작하여 측정기 개발 시간을 줄일 수 있었다. 또한, 저-레벨의 초음파 에코 신호를 처리하기 위한 송수신 스위치회로, 다단 능동 필터회로 및 포락선 검출회로 등을 설계하였고, 실험을 통하여 설계된 측정기가 약 1mm 이내의 측정 정확도를 가짐을 확인하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 E
• /
• pp.1644-1646
• /
• 1998

High-Smokestacks have been the symbol of the thermal power plant. Those cause the thermal power plant to be damaged by lightening for reaching several hundreds meter. In this paper, we investigated the accident of low-voltage source circuit due to grounding potential rise by lightening via high-smokestack in practically driving power plant, described examination into the cause and the impulse analysis. We analysed the transient voltage by EMTP(ElectroMagnetic Transient Program) via modeling the grounding system of power plant. This theoretical results coincided with practical accidental state. Therefore, it was verified that we could apply the grounding system of power plant and substation with the distribution-circuit analysis(EMTP).

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2003년도 추계학술대회 논문집
• /
• pp.127-130
• /
• 2003

An RSFQ (Rapid Single Flux Quantum) counter can be used as a frequency divider that was an essential part of a programmable voltage standard chip. The voltage standard chip is composed of two circuit parts, a counter and an antenna Analog signal of tens to hundreds ㎓ may be applied to a finline antenna part. This analog signal can be converted to the stream of SFQ voltage pulses by a DC/SFQ circuit. The number of voltage pulses can be reduced by 2n times when they pass through a counter that is composed of n T Flip-Flops (Toggle Flip-Flop). Such a counter can be used not only as a frequency divider, but also to build a programmable voltage standard chip. So, its application range can be telecommunication, high speed RAM, microprocessor, etc. In this work, we have used Xic, WRspice, and L-meter to design an RSFQ counter. After circuit optimization, we could obtain the bias current margins of the T Flip-Flop circuit to be above 31％ Our RSFQ counter circuit designs were based on the 1 ㎄/$\textrm{cm}^2$ niobium trilayer technology.

• Journal of Magnetics
• /
• 제15권4호
• /
• pp.194-198
• /
• 2010

In our present work, we developed a GMI (giant magnetoimpedance) sensor system to detect magnetic fields in the milli gauss range based on the asymmetric magnetoimpedance (AGMI) effect in Co-based amorphous ribbon with self bias field produced by field-annealing in open air. The system comprises magnetoimpedance sensor probe, signal conditioning circuits, A/D converter, USB controller, notebook computer, and program for measurement and display. Sensor probe was constructed by wire-bonding the cobalt based amorphous ribbon with dimensions $10\;mm\;{\times}\;1\;mm\;{\times}\;20\;{\mu}m$ on a printed circuit board. Negative feedback was used to remove the hysteresis and temperature dependence and to increase the linearity of the system. Sensitivity of the milli gauss meter was 0.3 V/Oe and the magnetic field resolution and environmental noise level were less than 0.01 Oe and 2 mOe, respectively, in an unshielded room.