• 한국공간구조학회논문집
• /
• 제10권4호
• /
• pp.75-83
• /
• 2010

복합적층판은 다른 금속재료에 비해 높은 비강도, 비강성 등의 우수한 역학적 특성을 지니므로, 최근 다양한 분야에서 사용하고 있다. 그러나 이러한 복합적층판은 충격에 약하다는 단점이 있다. 그리하여 복합적층판의 충격거동에 대한 많은 연구가 이루어지고 있다. 충격거동을 조사하기 위해서는 우선 충격체와 복합적층판사이의 접촉력을 계산하여야 한다. 접촉력을 알기 위해서는 운동방정식, 복합적층판의 운동방정식 그리고 압입량에 관한 관계식을 동시에 풀어야 한다. 본 연구에서는 고전적인 헤르츠식, 썬식, 썬&양식 그리고 썬&탄식을 포함한 유한요소프로그램을 이용하여 복합적층판의 저속충격거동을 조사한다.

• 한국재료학회지
• /
• 제19권4호
• /
• pp.224-227
• /
• 2009

Nanofabrication is an essential process throughout industry. Technologies that produce general nanofabrication, such as e-beam lithography, dip-pen lithography, DUV lithography, immersion lithography, and laser interference lithography, have drawbacks including complicated processes, low throughput, and high costs, whereas nano-transfer printing (nTP) is inexpensive, simple, and can produce patterns on non-plane substrates and multilayer structures. In general nTP, the coherency of gold-deposited stamps is strengthened by using SAM treatment on substrates, so the gold patterns are transferred from stamps to substrates. However, it is hard to apply to transfer other metallic materials, and the existing nTP process requires a complicated surface treatment. Therefore, it is necessary to simplify the nTP technology to obtain an easy and simple method for fabricating metal patterns. In this paper, asnTP process with poly vinyl alcohol (PVA) mold was proposed without any chemical treatment. At first, a PVA mold was duplicated from the master mold. Then, a Mo layer, with a thickness of 20 nm, was deposited on the PVA mold. The Mo deposited PVA mold was put on the Si wafer substrate, and nTP process progressed. After the nTP process, the PVA mold was removed using DI water, and transferred Mo nano patterns were characterized by a Scanning electron micrograph (SEM) and Energy Dispersive spectroscopy (EDS).

• 패션비즈니스
• /
• 제22권1호
• /
• pp.100-113
• /
• 2018

From the late 17th to the early 18th century, Europeans were strongly intrigued by products from the East. Therefore, several countries like England, France, and Netherlands formed the 'East India Company' to pursue trade. First, European markets rapidly responded to this desire for exoticism by importing goods; then, they produced imitation Oriental goods. Finally, they made stylistically advanced exotic merchandise from the perspectives of European. In terms of the textile industry, this trend was expressed in the pattern design of silk, or the so called 'bizarre silk.' In this paper, bizarre silk patterns were scrutinized based on a digital archive of museums, catalogues of museums, portal sites, and the literature. The bizarre silk patterns were analyzed then classified into six categories: pseudo-Oriental plant pattern, pattern mingled with architectural motifs, pattern of juxtaposed with Oriental goods, abstract pattern, exuberant pattern with metal threads, and semi-naturalistic pattern. These patterns were characterized according to the following features: strangely large exotic floral patterns were undulating and asymmetrical; exotic foliage and flowers were sometimes mixed with architectural motifs or Oriental goods to easily show the Oriental influence; motifs of bizarre silk patterns were abstractly stylized; bizarre silk patterns became luxurious once more like the Baroque period; finally, floral patterns became more natural, and still exotic motifs remained in the background to maintain the bizarre silk features. These bizarre silk patterns evolved from the viewpoints of Europeans through acceptance stage, compound stage, and confluent stage.

• 한국환경과학회지
• /
• 제21권3호
• /
• pp.369-375
• /
• 2012

We investigated usefulness of chicken feather as bioadsorbent for removal of hexavalent chromium[Cr(VI)] and oil from aqueous solution. Chicken feather was chemically treated with DTPA, EDTA, NaOH and SDS, respectively. Among them, EDTA was the most effective in adsorbing Cr(VI). Cr(VI) uptake by chicken feather was increased with decreasing pH; the highest Cr(VI) uptake was observed at pH 2.0. By increasing Cr(VI) concentration, Cr(VI) uptake was increased, and maximum Cr(VI) uptake was 0.34 mmol/g. Cr(VI) adsorption by chicken feather was well described by Freundlich isotherm than Langmuir isotherm and Freundlich constant(1/n) was 0.476. As the concentration of chicken feather was increased, Cr (VI) removal efficiency was increased but Cr(VI) uptake was decreased. Most of Cr(VI) was adsorbed at early reaction stage(1 h) and adsorption equilibrium was established at 5 h. On the other hand, chicken feather adsorbed effectively oils including bunker-A and bunker-C. In conclusion, our results suggest that chicken feather waste could be used to remove heavy metal and oil; it is a potential candidate for biosorption material.

• 한국주조공학회지
• /
• 제25권6호
• /
• pp.259-264
• /
• 2005

The copper clad steel wire is used extensively as lead wires of electronic components such as capacitors, diodes and glass sealing lamp because the wire combines the strength and low thermal expansion characteristic of Fe-Ni steel with the conductivity and corrosion resistance of copper. In order to fabricate the copper clad steel wire, several processes including electro-plating, tubecladding extrusion process and dip forming process have been introduced and applied. The electroplating process for the production of copper clad steel wire shows poor productivity and induces environmental load generation such as electroplating solution. The dip forming process is suitable to mass production of copper clad steel such as trolley wire. and need expensive manufacturing facilities. The present paper describes the improvement of the conventional continuous casting process to fabricate copper clad steel wire, which its core metal is low thermal expansion Fe-Ni alloy and its sheath material is copper. In particular, the formation of intermetallic compound at interface between core and sheath was investigated in order to introduce optimum continuous casting process parameter for fabrication of copper clad steel wire with higher electrical conductivity. The mechanical strength of copper clad steel wire was also investigated through wiredrawing process with of 95% in total reduction ratio.

• 자원리싸이클링
• /
• 제4권3호
• /
• pp.2-9
• /
• 1995

탈황 폐촉매 중에 함유되어 있는 Ni, V 및 Mo을 배소, 암모니아 침출 및 용매추출법을 이용하여 분리.회수하는 프로세스에 대하여 연구하였다. 폐촉매를 $400^{\circ}C$로 3시간 동안 배소한 후, 20mesh 이하로 분쇄하여, 고액비 50g/d㎥의 조건에서 100g/d㎥-(NH$_4$)$_2$CO$_3$를 침출제로 하여 $80^{\circ}C$에서 침출한 결과 Ni, V 및 Mo의 침출율은 각각 81.2%, 65%, 87.5%이었다. 이 침출액을 방냉하면 침출액 중의 74%의 V이 바나듐산 나트륨염의 형태로 침전되어 순도 95.7%의 V을 회수할 수 있었다. 1차 침출 후의 잔사에$ Na_2$$CO_3$를 가하여 $1000^{\circ}C$에서 재차 배소한 후, 온수에 침출하여 잔존된 Mo과 V을 95%이상 침출되었다. 1차 침출액 중의 Ni, V 및 Mo을 용매추출법으로 분리.정제하였다. 용액 중의 Ni는 MSP-8, V은 TOMAC을 추출제로 하여 추출.분리하고 Mo은 raffinate로 분리하였다. Batch 추출에 의하여 Ni은 95%, V은 98%가 유기상에 추출되었으며, 역추출액에 환원제를 첨가하여 순도 99%이상의 V을 회수하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 Techno-Fair 및 추계학술대회 논문집 전기물성,응용부문
• /
• pp.124-125
• /
• 2007

The composites were fabricated $\beta$-SiC and $TiB_2$ powders with the liquid forming additives of 8, 12, 16[wt%] $Al_2O_3+Y_2O_3$ as a sintering aid by pressureless annealing at $1,650[^{\circ}C]$ for 4 hours. Reactions between SiC and transition metal $TiB_2$ were not observed in the microstructure and the phase analysis of the pressureless annealed SiC-$TiB_2$ electroconductive ceramic composites. The relative density, the flexural strength, the Young's modulus and the Vicker's hardness showed the highest value of 82.29[%], 189.5[MPa], 54.60 [GPa] and 2.84[GPa] for SiC-$TiB_2$ composites added with 16[wt%] $Al_2O_3+Y_2O_3$ additives at room temperature. The relative density of SiC-$TiB_2$ composites was lowered due to gaseous products of the result of reaction between SiC and $Al_2O_3+Y_2O_3$. The electrical resistivity showed the lowest value of 0.012[${\Omega}{\cdot}cm$] for 16[wt%] at 25[$^{\circ}C$]. The electrical resistivity was all negative temperature coefficient resistance (NTCR) in the temperature ranges from 25[$^{\circ}C$] to 700[$^{\circ}C$].

• 한국산학기술학회논문지
• /
• 제16권9호
• /
• pp.5789-5794
• /
• 2015

최근 스마트 폰, 모바일 PC 제품의 외관에 필요한 가벼운 금속제품으로 제조를 하기 위하여 알루미늄 압출 공정과 CNC 가공기법을 적용한 생산방식이 널리 사용되고 있다. 하지만, 알루미늄 압출법은 외관 디자인의 제약이 있으며, 특히 CNC 가공 프로세스가 상대적으로 높은 생산 비용 및 낮은 생산성으로 생산단가가 많이 높은 단점이 있다. 본 연구에서, 새로운 처리 방법을 순서 재료비를 대폭 감소시키고, 제조 속도를 향상시키기 위해 판재성형과 부피성형의 두가지 공정을 섞어 새로운 판단조 공정을 개발하였다. 새로운 판단조 공법(hybrid plate forging)이란 우선 일반적인 딥드로잉으로 중간 모양을 만든 후 원하는 벽 부위만 증육을 하는 방법을 의미한다. 이러한 판단조 공법을 활용하여 재료의 낭비와 제조 시간을 최소화하는 것이 가능하게 된다. 본 연구에서는 상용 유한 요소 프로그램 AFDEX-2D를 통해 판단조공정을 설계하였고 최적의 사용 가능한 소재의 두께와 초기 폭을 설계하였다. 최종적으로 실제 노트북 케이스 금형을 제작하여 제안한 방법의 타당성을 검증하였다.

• 한국표면공학회지
• /
• 제34권1호
• /
• pp.10-16
• /
• 2001

Recently plasma etching research has been focused on the metal surfaces in the nuclear industry. In this study, surface etching reaction of metallic Co and Mo, principal contaminants in the spent nuclear components, in CF$_4$/O$_2$, gas plasma has been experimentally investigated to look into the applicability and the effectiveness of the technique for the surface decontamination. Experimental variables are $CF_4$/$O_2$ ratio and substrate temperature between 29$0^{\circ}C$ and 38$0^{\circ}C$. Experimental results Show that the optimum gas composition is 80%CF$_4$-20%$O_2$ and the metallic Co and Mo are etched out well enough in the temperatures range. Cobalt starts to be etched above $350^{\circ}C$ and the etching rate increases with increasing substrate temperature. Maximum rate achieved at 38$0^{\circ}C$ under 220 W r.f. plasma power is 0.06 $\mu\textrm{m}$/min. On the other hand, the metallic Mo is etched easily even at low temperature and the reaction rate drastically increases as the substrate temperature goes up. Highest rate obtained under the same conditions is $1.9\mu\textrm{m}$/min. OES (Optical Emission Spectroscopy) analysis reveals that the intensities of F atom and CO molecule reach maximum at the optimum gas composition, which demonstrates that the principal reaction mechanism is fluorination and/or carbonyl reaction. It is confirmed, therefore, that dry processing technique using reactive plasma is quite feasible and applicable for the decontamination of surface-contaminated parts or equipments.

• 자원리싸이클링
• /
• 제1권1호
• /
• pp.44-50
• /
• 1992

소규모공장 규모의 알카리 및 산공정법에 의해 철강의 산세 폐액으로부터 $\alpha$-FeOOH를 제조하였으며, 이 때 합성된 분체를 TEM, SEM, TG-DTA, XRD, VSM 및 화학분석으로 물성을 조사하였다. 실험결과에 의하면, $\alpha$-FeOOH의 제조에 있어서 알카리 공정의 반응 시간이 짧으며, 제조된 분체는 약 $0.5\mu\textrm{m}$의 크기로 침상을 나타내었다. 또한 제조 방법에 따라 $\alpha$-FeOOH 와 $\alpha-Fe_2O_3$가 생성되며 이들은 미려한 황색 및 적색을 띠고 있었고 $\alpha-Fe_2O_3$를 $370^{\circ}C$의 수소 분위기에서 1시간 환원하면 367(Oe) 및 86.7 (emu/g)의 자성을 갖는 $Fe_3O_4$ 가 얻어질 수 있었다.