• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.388-388
• /
• 2013

현대 사회에서 고집적 및 고성능의 전자소자의 필요성은 지속적으로 요구되고 있으며, 투명하거나 플렉서블한 특성의 필요성에 따라 이에 대한 기술개발이 이루어지고 있다. 특히, 이러한 특성을 만족하면서 대면적화 및 저온 공정의 특성을 지니는 유기물 반도체가 주목받고 있고, 이를 이용하여 OLED (Organic Light Emitting Diode), OTFT (Organic Thin Film Transistor)와 같은 다양한 유기물 반도체 소자가 개발되고 있다. 대표적인 예로는이 있다. 유기물 반도체 소자의 특성을 이용한 메모리 소자 또한 연구 및 개발이 지속되고 있으며, 유연성과 낮은 공정가격 등의 특성을 가지는 나노 입자들이 기존 Floating Gate의 대체물로 각광받고 있다. 본 논문에서는 MIS (Metal/Insulator/Semiconductor) 구조를 제작하고, Insulator 내부에Core/Shell 구조를 가지는 CdSe/ZnS 나노 입자를 부착하여 메모리 소자의 특성 확인 및 단위 면적당 개수에 따른 특성 변화를 확인하고자 하였다. 합성된 PVP (Poly 4-Vinyl Phenol)를 Insulator 층으로 사용하였으며 단위 면적당 나노 입자의 개수를 조절하여 제작된 MIS 소자를 Capacitance versus Voltage (C-V) 측정을 통하여 변화특성을 확인하였다.

• Journal of Korea Foundry Society
• /
• v.12 no.1
• /
• pp.40-50
• /
• 1992

A computer simulation of mold filling has been performed in order to analyze the fluid flow pattern in a mold cavity since casting defects such as cold shut formation, entrapment of air or gas, and inclusions are closely related to the fluid flow phenomena. The flow of molten metal entering the mold cavity with free surface has been modeled by SMAC(Simplified Marker and Cell) method. Two dimensional analysis was carried out on plate shape castings with two types of gate system. The calculation results were compared with those of water modeling experiments and showed relatively good agreement.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.717-720
• /
• 2007

We fabricated the 3.5 inch QCIF AMOLED panel with ultra low temperature polycrystalline silicon TFT on the plastic substrate. To reduce the leakage current, we used the triple layered gate metal structure. To reduce the stress from inorganic dielectric layer, we applied the organic interlayer dielectric and the photoactive insulating layer. By using the interlayer dielectric as a capacitor, the mask steps are reduced up to five.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.9
• /
• pp.771-774
• /
• 2003

In this paper, the programming characteristics of the multi-bit devices based on SONOS structure are investigated. Our devices have been fabricated by 0.35 $\mu\textrm{m}$ complementary metal-oxide-semiconductor (CMOS) process with LOCOS isolation. In order to achieve the multi-bit operation per cell, charges must be locally frapped in the nitride layer above the channel near the source-drain junction. Programming method is selected by Channel Hot Electron (CUE) injection which is available for localized trap in nitride film. To demonstrate CHE injection, substrate current (Isub) and one-shot programming curve are investigated. The multi-bit operation which stores two-bit per cell is investigated. Also, Hot Hole(HH) injection for fast erasing is used. The fabricated SONOS devices have ultra-thinner gate dielectrics and then have lower programming voltage, simpler process and better scalability compared to any other multi-bit storage Flash memory. Our programming characteristics are shown to be the most promising for the multi-bit flash memory.

• Journal of Korea Society of Industrial Information Systems
• /
• v.18 no.1
• /
• pp.19-24
• /
• 2013

As CMOS technology is scaled down more aggressively, the reliability mechanism (or aging effect) caused by the diffusion of metal atoms along the conductor in the direction of the electron flow, also called electromigration (EM), has become a major reliability concern. With the present of EM, it is difficult to control the current flows of the MOSFET device and interconnect. In addition, nanoscale CMOS circuits suffer from increased gate leakage current and power consumption. In this paper, the EM effects on current of the nanoscale CMOS circuits are analyzed. Finally, this paper introduces an on-chip current measurement method providing lifetime electromigration management which are designed using 45-nm CMOS predictive technology model.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.2
• /
• pp.97-101
• /
• 2003

New Pt/Ti and hi/Ti double-metal structures have been investigated for the application of a diffusion barrier between Cu and Si in deep submicron integrated circuits. Pt/Ti and Ni/Ti were deposited using E-beam evaporator at room temperature. The performance of Pt/Ti and Ni/Ti structures as diffusion barrier against Cu diffusion was examined by charge pumping method, gate leakage current, junction leakage current, and SIMS(secondary ion mass spectroscopy). These evaluation indicated that Pt/Ti(200${\AA}$/100${\AA}$) film is a good barrier against Cu diffusion up to 450$^{\circ}C$.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.215-216
• /
• 2006

To lower the cost of MIM products, the gate and runner materials and green parts with defects are usually recycled. It is necessary to understand what causes the recycled products to deteriorate. The results show that the viscosity of the 1R (recycled once) feedstock was slightly lower than that of the fresh material. However, as the number of recyclings increased, the viscosity increased, while the density decreased, and more defects were noticed duri ng solvent debinding. These deteriorations were mainly caused by the increase of the melting point of the backbone binder and the oxidation of the filler or paraffin wax.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.140-141
• /
• 2007

To fabricate the metal-ferroelectric-insulator-semiconductor (MFIS) structure for the ferroelectric random access memory (FRAM) application, we prepared the ferroelectric $Sr_{0.9}Bi_{2.1}Ta_2O_9$ (SBT) and the insulator LaZrOx (LZO) thin films on the silicon substrate using a sol-gel method. In this study, we will investigate the feasibility of the SBT/LZO/Si structure as one of the promising gate configuration for the 1-transistor (1-T) type FRAM, by measurements of the electrical properties and the physical properties.

• Transactions on Electrical and Electronic Materials
• /
• v.18 no.4
• /
• pp.195-198
• /
• 2017

This research analyzed the electrical characteristics of an 80 V optimal trench power MOSFET (metal oxide field effect transistor) for mobile applications. The power MOSFET is a fast switching device in fields with low voltage(<100 V) such as mobile application. Moreover, the power MOSFET is a major carrier device that is not minor carrier accumulation when the device is turned off. We performed process and device simulation using TCAD tools such as MEDICI and TSUPREM. The electrical characteristics of the proposed trench gate power MOSFET such as breakdown voltage and on resistance were compared with those of the conventional power MOSFET. Consequently, we obtained breakdown voltage of 100 V and low on resistance of $130m{\Omega}$. The proposed power MOSFET will be used as a switch in batteries of mobile phones and note books.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.11a
• /
• pp.433-436
• /
• 1999

In this paper we applied TVS(Triangular Voltage Sweep) method to calculate the mobile ionic charge densities in some ferroelectric thin films. During the measurement, the temperature of specimens were maintained at 20$0^{\circ}C$. By this method, the amount of mobile ionic charge Q$_{m}$ and mobile ionic charge density N$_{m}$ of a MFIS structure were calculated 3.5 [pC] and about 4.3$\times$10$^{11}$ [ions/cm$^2$], respectively. In order to successful TVS measurement, the gate leakage current density of films must be low 10$^{-9}$ (A/cm$^2$) order.der.