• 한국해양공학회지
• /
• 제38권4호
• /
• pp.149-163
• /
• 2024

This paper employs the third-generation simulating waves nearshore (SWAN) ocean wave model to estimate and analyze storm waves induced by Typhoon Bolaven, focusing on its impact along the west coast and Jeju Island of Korea. Utilizing reanalyzed meteorological data from the Japan Meteorological Agency meso scale model (JMA-MSM), the study simulated storm waves from Typhoon Bolaven, which maintained its intensity up to high latitudes as it approached the Korean Peninsula in 2012. Validation of the SWAN model against observed wave data demonstrated a strong correlation, particularly in regions where wind speeds exceeded 20 m/s and wave heights surpassed 5 m. Results indicate significant storm wave heights across Jeju Island and Korea's west and southwest seas, with coastal grid points near islands recording storm wave heights exceeding 90% of the 50-year return period design wave heights. Notably, specific grid points near islands in the northern West Sea and southwest Jeju Island estimated storm wave heights at 90.22% and 91.48% of the design values, respectively. The paper highlights the increased uncertainty and vulnerability in coastal disaster predictions due to event-driven typhoons and emphasizes the need for enhanced accuracy and speed in typhoon wave predictions amid the escalating climate crisis.

• 한국환경복원기술학회지
• /
• 제10권1호
• /
• pp.57-71
• /
• 2007

While a concept on biotop or the urgency of its classification systems have been under discussion recently, this study aims to examine outdoor biotop classification systems for environment-friendly community. To this end, the feasibility of creating a biotop in the community and application elements were generated and biotops were classified and categorized. Then, elements that can be applied in consideration of traditional Korean techniques were generated and biotop classification systems and specific components in residential areas were reviewed. As for the result of this study, based on a preliminary draft prepared through literature review, considerations for biotop classification systems were taken into account. Then, based on classification criteria for biotop formats, biotop functions and biotop types, a second-tier classification system was developed. Criteria for biotop formats included surfaces, lines and points while criteria for biotop functions were large cores, small bases, corridors, stepping stones and ecological islands. Criteria for habitat types were divided to include natural forest, developed green areas, lacustrine wetland, palustrine wetland, shrubs, grasslands, linear habitats, vacant plots and practical green areas, which were sub-categorized. As for the biotop classification system, macro-classification divided biotops into three types-space, line and point-based on biotop formats. Meso-classification had five groups and micro-classification had 21 groups based on habitat types. Future studies should focus on the ecological features of each biotop categories generated in this study and their creation and management techniques to find many practical methods to create, protect and manage outdoor biotop for environment-friendly community.

• Mass Spectrometry Letters
• /
• 제2권2호
• /
• pp.49-52
• /
• 2011

Competitive binding of $C_{60}$ and $C_{70}$ to meso-substituted porphyrins was studied by mass spectrometry (MS). Electrospray ionization MS was employed to acquire the mass spectra of 1 : 1 porphyrin-fullerene complexes formed in a mixture of mesosubstituted porphyrin and fullerite to determine the ratio of complexes between $C_{60}$ and $C_{70}$. Matrix-free laser desorption ionization MS was used to obtain the mass spectra of fullerite to measure the mole fraction of $C_{60}$ and $C_{70}$. The binding constant ratio ($K_{70}$/$K_{60}$) was determined from the mass spectral data. The difference in standard Gibbs free energy change, ${\Delta}({\Delta}G^o)_{70-60}$, for the competitive binding of $C_{60}$ and $C_{70}$ was calculated from $K_{70}$/$K_{60}$. Of the five porphyrins, tetraphenyl, tetra(4-pyridyl), tetra(4-carboxyphenyl), tetra(3,5-di-tert-butylphenyl), and tetra(pentafluorophenyl) porphyrins, the first three non-bulky porphyrins yield negative values of ${\Delta}({\Delta}G^o)_{70-60}$, whereas the other two bulky porphyrins result in positive values of ${\Delta}({\Delta}G^o)_{70-60}$. This result indicates that $C_{70}$ binding to porphyrin is thermodynamically favored over $C_{60}$ binding in non-bulky porphyrins, but disfavored in bulky ones. It also suggests that the binding mode of $C_{70}$is different between non-bulky and bulky porphyrins, which is in line with previous experimental findings of the "side-on" binding to non-bulky porphyrins and the $C_{60}$-like "end-on" binding to bulky porphyrins.

• Journal of Applied Biological Chemistry
• /
• 제63권2호
• /
• pp.169-174
• /
• 2020

The objective of this study was to investigate the effects of a hypodermic injectable solution comprised of an LPM LB meso solution containing Melissa officinalis L. leaf extract (LPM) on the lipogenesis in the 3T3-L1 cells line. The lipid accumulation measured by oil red o staining in the 3T3-L1 adipocytes treated with LPM, which was reduced in a dose dependent manner and showed 91.7 to 62.9% compared to control group. Its effectiveness with a 50% solution was significantly higher than the hydroxycitric acid (positive control) treatment without showing cell cytotoxicity. In a quantitative real-time PCR, it was demonstrated that the LPM treatment appeared to upregulate the mRNA expression of the adipogenesis-related genes, which included the peroxisome proliferator-activated receptor gamma (50% concentration) while down-regulating the CCAAT-enhancer binding protein alpha (50% concentration) and the sterol regulatory element-binding protein 1c (10, 25, and 50% concentrations). The results from the current study suggest that the LPM could be useful biomaterials that can inhibit obesity in the 3T3-L1 cells, which could possibly be by regulating the specific adipogenic gene transcription factors.

• 청정기술
• /
• 제2권2호
• /
• pp.51-59
• /
• 1996

Billions of tons of industrial waste are generated annually in industrialized countries. Managing and legally disposing of these wastes costs tens to hundreds of billions of dollars each year, and these costs have been increasing rapidly. The escalation is likely to continue as emission standards become even more stringent around the world. In the face of these rapidly rising costs and rapidly increasing performance standards, traditional end-of-pipe approaches to waste management have become less attractive. The most economical waste management alternatives in many cases have become recycling of the waste or the redesign of chemical processes and products so that wastes are prevented or put to productive use. These strategies of recycling or reducing waste at the source have collectively come to be known as pollution prevention. The engineering challenges associated with pollution prevention are substantial. This presentation will categorize the challenges in three levels. At the most macroscopic level, the flow of materials in our industrial economy, from natural resource extraction to consumer product disposal, can be redesigned. Currently, most of our raw materials are virgin natural resources that are used once, then discarded. Studies in what has come to be called industrial ecology examine the material efficiency of large-scale industrial systems and attempt to improve that efficiency. A second level of engineering challenges is found at the scale of individual industrial facilities, where chemical processes and products can be redesigned so that waste is reduced. Finally, on a molecular level, chemical synthesis pathways, combustion reaction pathways, and other material fabrication procedures can be redesigned to reduce emissions of pollution and unwanted by-products. All of these design activities, shown in Figure 1, have the potential to prevent pollution. All involve the tools of engineering, and in particular, chemical engineering.

• 한국응용과학기술학회지
• /
• 제31권3호
• /
• pp.367-374
• /
• 2014

In this study, skin permeation enhancement was confirmed by designing it to have a structure and composition similarity to the intercellular lipids that improve miscibility with skin by cross-linked lipids poloxamer. The cross-linked lipids poloxamer was synthesized and analyzed by 1H NMR that structure dose had conjugated pluronic with ceramide3. Active component is released by modification of liquid crystal structure because PPO part, large-scale molecule block of pluronic, has hydrophobic nature at skin temperature of $35^{\circ}C$. Conjugated pluronic with ceramide3 was synthesized using Pluronic F127 and p-NPC (4-nitrophenyl chloroformate) at room temperature yielded 89%. Pluronic(Ceramide 3-conjugated Pluronic) was synthesized by reaction of p-NP-Pluronic with Ceramide3 and DMAP. The yield was 51%. This cross-linked lipids poloxamer was blended and dissolved at isotropic state with skin surface lipids, phospholipid, ceramide, cholesterol and anhydrous additive solvent. Next step was preceded by ${\alpha}$-Transition at low temperature for making the structure of Meso-Phase Lamella, and non-hydrous skin analogue liquid crystal using thermo-sensitivity smart sensor, lamellar liquid crystal structure through aging time. For confirmation of conjugation thermo-sensitivity smart sensor and non-hydrous skin analogue liquid crystal, structural observation and stability test were performed using XRD(Xray Diffraction), DSC(Differential Scanning Calorimetry), PM (Polarized Microscope) And C-SEM (Cryo-Scanning Electron Microscope). Thermo-sensitivity observation by Franz cell revealed that synthesized smart sensor shown skin permeation effect over 75% than normal liquid crystal. Furthermore, normal non-hydrous skin analogue liquid crystal that not applied smart sensor shown similar results below $35^{\circ}C$ of skin temperature, but its effects has increased more than 30% above $35^{\circ}C$.

• 한국환경복원기술학회지
• /
• 제24권3호
• /
• pp.69-84
• /
• 2021

This study was conducted as a basic data for the management of the Uiseong Traditional Irrigation Agricultural System by identifying plant diversity and distribution characteristics. The total number of plant taxa was identified as 88 families, 250 genera, 368 species, 7 subspecies, 9 varieties and 384 taxa. In the case of life form, the domancy form was in the therophytes(th), the radicoid form was a R₅(monophyte), the disseminule form was the gravity D₄(having no special modification for dissemination), and the growth form was the erect form was high. The number of plant taxa by land use type was higher in mountainoustype reservoirs and plain type reservoirs than other land use types. The distribution of plants by land use type according to the hemeroby grade was plantation in the case of 3 grade(meso-hemeroby) forests, and the understory were mainly photophilic plants. With 4 grade(β-euhemeroby), traditional cemetery, plain type reservoirs, mountainoustype reservoirs, stream, and rice terraces are areas with relatively low intensive management and have a wide variety of flora, whereas 5 grade(α-euhemeroby) orchard were mainly distributed with ruderal plant due to high intensive management. As for the number of plant taxa by reservoirs, the Wisgol pond in the case of plain type reservoirs, Ungok pond was high in mountainous type reservoirs. The protected species were rare plants 2 classification groups of Vulnerable(VU) species, 4 classification groups of Least Concrned(LC) species, 1 classification group of Data Deficient(DD) species, 5 classification groups of Korean endemic plants, and 49 classification groups of invasive alien plants, and the total naturalization index was 12.2%.

• Structural Engineering and Mechanics
• /
• 제77권1호
• /
• pp.137-149
• /
• 2021

In engineering design, the axial equivalent elastic modulus of laminated FRP pipe was mostly calculated by the average elastic modulus method or the classical laminated plate theory method, which are based on relatively simplified assumptions, and may be not accurate enough sometimes. A new analytical calculation method for the axial equivalent elastic modulus of laminated FRP pipe was established based on three-dimensional stress state. By comparing the results calculated by this method with those by the above two traditional analytical methods and the finite element method, it is found that this method for the axial equivalent elastic modulus fits well not only for thin-walled pipes with orthotropic layers, but also for thick-walled pipes with arbitrary layers. Besides, the influence of the layer stacking on the axial equivalent elastic modulus was studied with this method. It is found that a proper content of circumferential layer is beneficial for improving the axial equivalent elastic modulus of the laminated FRP pipe with oblique layers, and then can reduce its material quantity under the premise that its axial stiffness remains unchanged. Finally, the meso-mechanical mechanism of this effect was analyzed. The improving effect of circumferential layer on the axial equivalent elastic modulus of the laminated FRP pipe with oblique layers is mainly because that, the circumferential fibers can restrain the rigid body rotations of the oblique fibers, which tend to cause the significant deformations of the pipe wall units and the relatively low axial equivalent elastic modulus of the pipe.

• Ocean and Polar Research
• /
• 제30권4호
• /
• pp.509-518
• /
• 2008

Distribution of bacterial abundance and production was investigated in seawater around Saemangeum dike 7 times during March, $2007{\sim}July$, 2008. In the inner area of the dike, salinity variation was great due to river runoff from Mangyung and Dongjin Rivers and high chlorophyll a (chl a) concentrations up to $124.3{\mu}g\;l^{-1}$ was found. In the outer area of the dike, salinity was higher than in the inner area of the dike, and chl a was lower up to 10 times than in the inner area of the dike. Thus, the area of Saemangeum showed meso- to hypereutrophic conditions. Bacterial abundance and production ranged from 0.3 to $4.3{\times}10^9\;cells\;l^{-1}$ and from 5.2 to $570 pmol\;l^{-1}h^{-1}$ in outer area of the dike, respectively, while in the inner area of the dike bacterial abundance and production was 3 to 4 times higher ($0.4{\sim}12.7{\times}10^9\;cells\;l^{-1}$ and $12.3{\sim}1309\;pmol\;l^{-1}h^{-1}$, respectively) than those in the outer area. In both areas, bacterial abudance and production was highest in summer and lowest in winter. However, the variations of bacterial parameters was very large in each season. These large variations seemed to be related with the supply of organic matter. Bacterial abundance and production showed significant negative correlations with salinity in the inner area, suggesting that allochthonous organic matter input by river runoff could be an important factor in regulating the distribution of bacterial abundance and production. In addition, bacterial production also correlated positively with chl a in the inner area, suggesting that autochthonous substrate might be another regulating factor of bacterial growth in the area. These results suggest that the supply of both allochthonous organic substrates introduced by river runoff and autochthonous substrates produced by phytoplankon could be important in regulating bacterial growth and utilization of organic matter in the area. Thus, to manage water quality in the inner area of dike, it seems to be important to lower the load of both organic and inorganic nutrients from adjacent rivers.

• 콘크리트학회논문집
• /
• 제17권6호
• /
• pp.939-946
• /
• 2005

비균질 재료인 콘크리트의 강성 특성과 성능저하 현상을 웨이블릿 변환을 이용한 다중해상도해석을 통해 각 관찰 규모에 따라 동질화 과정의 적용성 및 거시적 손상지수의 평가 등을 연구하였다. 연속적인 Haar 웨이블릿 변환은 기존 강성행렬의 특성을 연속적인 축소규모로의 복제를 통해 미세규모로부터 거시규모로의 축소 또는 복원 과정을 나타내었고 이는 선형구조계의 크기별 스펙트럼 특성의 보존, 즉 타원성, 철면성 그리고 양의 정부호성을 보존하여 각 규모별 해의 유효성을 확인하였다. 웨이블릿 계수를 이용한 기존 강성의 평균은 거시단계의 변형에너지와 상호관계를 가지고 아래 단계로의 축소, 윗 단계로의 복원을 자유롭게 할 수 있는 장점이 있다. 이러한 다중해상도해석의 예제로서 1차원 및 2차원 2상복합체를 가지고 유한요소해석을 통해 기존 이론의 검증과 최소고유치의 각 크기단계별 변화 과정, 원 축소 구조계의 해의 유일성 그리고 국부적 손상지수의 동질화 여부 등을 검사하였다. 이러한 동질화 축소 과정은 자유도가 큰 비선형 구조계로의 적용의 첫 단계를 제공하였다.