• Membrane Journal
• /
• v.23 no.4
• /
• pp.304-311
• /
• 2013

In fermentation-separation processes, nanofiltration membrane processes can be used to separate organic acid and other byproducts such as sugars and proteins. In this study, new nanofiltration membranes were prepared to improve organic acid permeability during the separation processes of fermentation broth. Positively charged nanofiltration membrane was introduced to reduce lactic acid rejection by electrostatic attraction between lactic acid and nanofiltration membrane. Newly fabricated nanofiltration membranes were prepared by grafting cationic polyelectrolyte, PEI, on membrane surface. Thenanofiltration membranes showed positively charged surface potential. As a result, lactic acid rejection was remarkably reduced while the rejection of glucose was not changed significantly.

• Membrane Journal
• /
• v.27 no.3
• /
• pp.226-231
• /
• 2017

1-Butyl-3-methylimidazolium tetrafluoroborate ($BMIM^+BF_4{^-}$) and $Al_2O_3$ as metal oxide for preparation of composite membrane were utilized for the $CO_2$ separation. When 13 nm $Al_2O_3$ nanoparticles were incorporated into ionic liquid $BMIM^+BF_4{^-}$, the separation performance for composite membrane showed the selectivity ($CO_2/N_2$) of 30.5 and $CO_2$ permeance of 45.7 GPU. The enhanced separation performance was attributable to the increased $CO_2$ solubility by both oxide layer of $Al_2O_3$ and abundant free ions of ionic liquid. In particular, $Al_2O_3$ nanoparticles acted as obstacles to nitrogen gas, resulting in the decrease of permeability of nitrogen gas. As a result, the carbon dioxide separation performance could be enhanced.

• The Korean Journal of Pharmacology
• /
• v.18 no.2
• /
• pp.69-77
• /
• 1982

$Na^+,\;K^+-ATPase$ is a component of plasma membrane in almost all animal cell, and maintains ionic distribution and membrane potential of normal cell. In the mechanism of adrenergic transmission, it is relatively well known that drug-receptor combination leads to stimulate adenylate cyclase and so on. In the cholinergic transmisison, the mechanism is not well known but is simply interpreted as the change of membrane permeability results from acetylcholine receptor interaction. To study the relationship between cholinergic transmission and membrane $Na^+,\;K^+-ATPase$, the effect of carbachol on $Na^+,\;K^+-ATPase$ activity in rabbit erythrocyte membrane is studied. The results are summarized as follows. 1) Total ATPase, $Mg^{+2}-ATPase$ and $Na^+,\;K^+-ATPase$ of rabbit erythrocyte membrane show maximum activities at 1mM of tris-ATP. 2) Total ATPase activity tends to increase when treated with carbachol $(10-^{-9}M-10^{-3}M)$. 3) The $Mg^{+2}-ATPase$ activity also tends to increase when treated with carbachol $(10-^{-9}M-10^{-3}M)$. 4) The $Na^+,\;K^+-ATPase$ activity is inhibited when treated with carbachol $(10-^{-9}M-10^{-7}M)$. It is suggested that the inhibition of $Na^+,\;K^+-ATPase$ by cholinergic drugs may be considered as one part of mechanism of cholinergic transmission.

• Membrane Journal
• /
• v.18 no.4
• /
• pp.317-324
• /
• 2008

Polysulfone membranes were prepared via the phase inversion process. With propionic acid as a nonsolvent additive, polysulfone casting solutions were solidified in an isopropanol bath. Propionic acid (PA) worked as a thermodynamic enhancer for phase separation and as a rheological suppressor for kinetic hindrance. Morphology of the prepared membranes significantly varied with propionic acid content in the casting solution. The dense skin layer, which was identified in the membrane prepared without PA, almost disappeared in the membrane prepared trom PA 10wt%. With 30wt% PA, the membrane revealed the morphological gradient from a nodular skin structure to a sponge-like substructure, including the finger-like cavity. Water permeability increased with PA content, and polyethylene glycol rejection decreased with the nonsolvent content.

• Membrane Journal
• /
• v.28 no.5
• /
• pp.361-367
• /
• 2018

In this study, the nanofiltration (NF) composite membranes for the low pressure use were prepared using polyvinylidene fluoride (PVDF) hollow fiber membrane as a supporter. Poly styrene sulfonic acid (PSSA) and polyethyleneimine (PEI) were coated onto the PVDF membrane by both layer-by-layer and salting-out methods. To characterize the prepared NF membranes in terms of the flux and salt rejection, 100 mg/L feed solutions of NaCl, $MgCl_2$, and $CaSO_4$ were used at the flow rate of 1 L/min and the operating pressure of 2 bar at room temperature. The NF membranes coated with 20,000 ppm PSSA (ionic strength 1.0) solution for 3 minutes and then 30,000 ppm (ionic strength 0.1) solution for 1 minute were observed the best performance. The permeability and salt rejection were 38.5 LMH, 57.1% for NaCl, 37.9 LMH and 90.2% for $MgCl_2$ and 32.4 LMH and 54.6% for $CaSO_4$, respectively.

• Membrane Journal
• /
• v.30 no.4
• /
• pp.260-268
• /
• 2020

Mixed-matrix carbon molecular sieve membranes containing conventional and hierarchically structured 5A were synthesized for application in oxygen (O₂)/nitrogen (N₂) separation. In general, incorporating 5A fillers into porous carbon matrices dramatically increased the permeability of the membrane with a marginal decrease in selectivity, resulting in very attractive O₂/N₂ separation performances. Hierarchical zeolite 5A, which contains both microporous and mesoporous domains, improved the separation performance further, indicating that the mesopores in the zeolite can serve as an additional path for rapid gas diffusion without sacrificing O₂/N₂ selectivity substantially. This facile strategy successfully and cost-effectively pushed the performance close to the Robeson upper bound. It produced high performance membranes based on Matrimid^® 5218 polyimide and zeolite 5A, which are inexpensive commercial products.

• KSBB Journal
• /
• v.10 no.4
• /
• pp.468-474
• /
• 1995

The disposable glucose bio-sensor using composite of CTA and PCL membrane was developed for measurement of glucose. The most effective membrane was composed of CTA/PCL(80/20, w/w) and glutaraldehyde one-step immobilization method ($10{\mu}m$ thickness) for glucose sensor gave the best result among various methods, considering oxygen permeability and electronic sensitivity. A scanning electron micrograph of the cross-section of a typical asymmetric CTA/PCL composite membrane showed that the membrane fused with a dense layer covered with a GOD-glutaraldehyde. Glucose oxidase immoblilized on the membrane showed the linearity between difference of absolute amperometric values and glucose concentrations within 7mM when the GOD immobilized electrode was used. About 35% of activity was remained after 8 days when the tyrosinase was immobilized on CTA/PCL (80/20) membrane.

• Korean Chemical Engineering Research
• /
• v.45 no.4
• /
• pp.345-350
• /
• 2007

During PEMFC operation, OCV(open circuit voltage) and low humidity conditions accelerate the degradation of perfluorosulfonic acid membrane. There have been no studies that clearly explain why these conditions accelerate the membrane degradation. In this study, the hydrogen permeability through the membrane, I-V polarization of MEA, fluoride emission rate(FER) and $H_2O_2$ concentration in condensed water were measured during cell operation under OCV and low relative humidity(RH). The experimental results were evaluated with oxygen radical mechanism the most commonly known for membrane degradation. It seems that low RH of anode is a good condition for $H{\cdot}$ radical formation on the Pt catalyst and the OCV condition accelerate the $H{\cdot}$ to form $HO_2{\cdot}$ radical attacking the polymer membrane.

• Polymer(Korea)
• /
• v.35 no.4
• /
• pp.296-301
• /
• 2011

This study focuses on the investigation of the impregnation of poly (vinyl alcohol) (PVA) crosslinked with poly(styrene sulfonic acid-co-maleic acid) (PSSA-MA) to porous polyethylene membrane for the fuel cell application. The membranes were characterized by the measurements of the water content, contact angle, FTIR spectra, thermal gravimetric analysis, ion exchange capacity, proton conductivity, methanol permeability and elastic modulus. The existence of hydrophilic moieties in the impregnated membranes was confirmed by contact angle and FTIR measurements. The impregnated PVA/PSSAMA(90:10) membrane exhibited a higher ion exchange capacity (1.2 meq./g dry membrane) than Nafion membrane (0.91 meq./g dry membrane). Through the elastic modulus measurement, the dimensional stability of the resulting membranes was expected to increase higher than the polyethylene membranes. The methanol crossover and water content decreased even if the PSSA-MA content increased due to the reduction of the free volume.

• Journal of Korean Society of Water and Wastewater
• /
• v.25 no.1
• /
• pp.95-106
• /
• 2011

Even though MBR processes have many advantages such as high quality effluents, a small footprint and convenience for operation compared to conventional activated sludge processes, there are some shortcomings in terms of the cost and potential fouling incident that keeps MBR (Membrane bioreactor) processes from being widely applied. To reduce these problems, PTFE (Polytetrafluoroethylene) flat sheet membranes that have excellent permeability and durability were tested instead of PVDF (Polyvinylidene fluoride) membrane which is being used widely in water treatment. Low concentration of sodium hydroxide (NaOH) was also added into the membrane modules in order to prevent the membrane fouling as well as to provide the alkalinity. With conditions mentioned above, a pilot-scale MBR system based on the MLE (Modified Ludzack Ettinger) process was operated at flux of 40 $L/m^{2}/hr$ and over 15,000 mg/L MLSS concentration for about 8 months. And coagulant(alum) was added into the membrane tank to remove phosphorus. Although the more coagulant is added the more effectively phosphorus is removed, that can lead to fouling for a long operation(Ronseca et al.,2009). By the way there is a research that fouling grow up after stopping injection of coagulant(Holbrook, 2004). Stable operation of MBR systems was achieved without major chemical cleaning and the effluent quality was found to be good enough to comply with the treated waste water quality regulations of the Korea.