• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2022.11a
• /
• pp.197-198
• /
• 2022

Based on the carbonation depth measurement by the indicator for concrete collected from old structures and the quantitative analysis of Ca(OH)₂ and CO₂ in the carbonation section before and after the carbonation depth and in the non-carbonation section, the absorbable CO2 amount and carbonation degree measurement result is as follows 1) The carbonation depth of the 40-year-old reinforced concrete structure was measured to be about 22 mm. (basement interior wall, marble finish, strength 30MPa) 2) The amount of CO₂ absorbed by the concrete was about 4.3% of the sample weight, and the carbonation degree was estimated to be about 53%.

• Journal of Korean Society on Water Environment
• /
• v.33 no.2
• /
• pp.130-139
• /
• 2017

With the need to evaluate accuracy of real-time measurement of cyanobacterial fluorescence to determine cyanobacterial blooms, this research examined 357 paired data (2013-2016) comprising both microscopic toxic cyanobacterial cell counts and concurrent real-time cyanobacterial concentrations at 2 sites (YS1 and YS2) in Yeongsan river. The increase in real-time cyanobacterial concentration was closely associated with the exceedance of 5,000 cyanobacterial cells/ml (odds ratio [OR] 1.07, 95% confidence interval [CI] 1.03-1.12) and 10,000 cells/ml (OR 1.08, 95% CI 1.04-1.12) at YS2 site. The area under the receiver operating characteristic (ROC) curve for the real-time cyanobacterial measurement at the YS2 site was 0.93, which indicates the measurement provides a high accurate detection of cyanobacterial blooms. On the ROC curve, the early alert levels of real-time cyanobacteria ranging $16-23{\mu}g$ chl-a/L would produce acceptable sensitivity of 79% and specificities greater than 90%. The real-time fluorescence measurement was found to be an accurate indicator of cyanobacteria and can serve as a tool for detecting toxic cyanobacterial bloom events in Youngsan river.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.1
• /
• pp.37-44
• /
• 2009

Density is the most important congestion indicator among the three fundamental flow variables, flow, speed and density. Measuring density in the field has two different ways, direct and indirect. Taking photos with wide views is one of direct ways, which is not widely used because of its cost and lacking of proper positions. Another direct density measuring method using two spot detectors has been introduced with the concept of instantaneous density, average density and measurement interval. The relationship between accuracy and measurement interval has been investigated using the simulation data produced by Paramics API function. Finally, density measurement algorithm has been suggested including exponential smoothing for device development.

• Journal of Preventive Medicine and Public Health
• /
• v.34 no.3
• /
• pp.244-252
• /
• 2001

Objective : Health insurers and policy makers are increasingly examining the hospital mortality rate as an indicator of hospital quality and performance. To be meaningful, a risk-adjustment of the death rates must be implemented. This study reviewed 5 severity measurement methods and applied them to the same data set to determine whether judgments regarding the severity-adjusted hospital mortality rates were sensitive to the specific severity measure. Methods : The medical records of 584 patients who underwent coronary artery bypass graft surgery in 6 general hospitals during 1996 and 1997 were reviewed by trained nurses. The MedisGroups, Disease Staging, Computerized Severity Index, APACHE III and KDRG were used to quantify severity of the patients. The predictive probability of death was calculated for each patient in the sample from a multivariate logistic regression model including the severity score, age and sex to evaluate the hospitals' performance, the ratio of the observed number of deaths to the expected number for each hospital was calculated. Results : The overall in-hospital mortality rate was 7.0%, ranging from 2.7% to 15.7% depending on the particular hospital. After the severity adjustment, the mortality rates for each hospital showed little difference according to the severity measure. The 5 severity measurement methods varied in their statistical performance. All had a higher c statistic and $R^2$ than the model containing only age and sex. There was a little difference in the relative hospital performance evaluation by the severity measure. Conclusion : These results suggest that judgments regarding a hospital's performance based on severity adjusted mortality can be sensitive to the severity measurement method. Although the 5 severity measures regarding hospital performance concurred, more often than would be expected by chance, the assessment of an individual hospital mortality rates varied by the different severity measurement method used.

• Journal of Korean Society of Transportation
• /
• v.28 no.3
• /
• pp.157-167
• /
• 2010

Density is the most important congestion indicator among the three fundamental flow variables, flow, speed and density. Measuring density in the field has two different ways, direct and indirect. Taking photos with wide views is one of direct ways, which is not widely used because of its cost and lacking of proper positions. Another direct density measuring method using two point detectors has been introduced with the concept of instantaneous density, average density and measurement interval. The relationship between accuracy and measurement interval has been investigated using the SIMULATION data produced by Paramics Application Programming Interface function. We analyze the affect of segment density accuracy by sensing gap each road condition such as sensing segment length, lane and LOS after gathering data by Paramics Application Programming Interface.

• Journal of Practical Engineering Education
• /
• v.16 no.2
• /
• pp.129-141
• /
• 2024

In recent times, there has been a shift towards student-centered higher education policies, leading to a growing interest among universities to improve students' learning outcomes. To aid in this endeavor, this study aims to provide guidance for University K to enhance their learning outcome management by comparing and analyzing their learning outcome indicators with those of other domestic and foreign universities. The study examined detailed measurement questions from major learning outcome measurement tools such as AHELO, NSSE, and CLA+. Upon comparison and analysis of University K's major learning outcome indicators with those of other universities, it was found that most of the indicators overlapped. However, some indicators such as student support/facilities for learning, instructor quality, and communication were absent from University K. Therefore, it is crucial to decide whether to add these indicators to the existing learning outcomes or to confirm them through other surveys. Moreover, even for the same indicator, some indicators with different measurement need to consider changing the measurement.

• Journal of Radiation Protection and Research
• /
• v.33 no.2
• /
• pp.47-51
• /
• 2008

Objective: This study analyzed errors due to rotation or tilt of the magnetic resonance (MR) imaging indicator during image acquisition for a stereotactic radiosurgery. The error correction procedure of a commercially available stereotactic neurosurgery treatment planning program has been verified. Materials and Methods: Software virtual phantoms were built with stereotactic images generated by a commercial programming language, Interactive Data Language (version 5.5). The thickness of an image slice was 0.5 mm, pixel size was $0.5{\times}0.5mm$, field of view was 256 mm, and image resolution was $512{\times}512$. The images were generated under the DICOM 3.0 standard in order to be used with Leksell GammaPlan$^{(R)}$. For the verification of the rotation error correction function of Leksell GammaPlan$^{(R)}$, 45 measurement points were arranged in five axial planes. On each axial plane, there were nine measurement points along a square of length 100 mm. The center of the square was located on the z-axis and a measurement point was on the z-axis, too. Five axial planes were placed at z=-50.0, -30.0, 0.0, 30.0, 50.0 mm, respectively. The virtual phantom was rotated by $3^{\circ}$ around one of x, y, and z-axis. It was also rotated by $3^{\circ}$ around two axes of x, y, and z-axis, and rotated by $3^{\circ}$ along all three axes. The errors in the position of rotated measurement points were measured with Leksell GammaPlan$^{(R)}$ and the correction function was verified. Results: The image registration errors of the virtual phantom images was $0.1{\pm}0.1mm$ and it was within the requirement of stereotactic images. The maximum theoretical errors in position of measurement points were 2.6 mm for a rotation around one axis, 3.7 mm for a rotation around two axes, and 4.5 mm for a rotation around three axes. The measured errors in position was $0.1{\pm}0.1mm$ for a rotation around single axis, $0.2{\pm}0.2mm$ for double and triple axes. These small errors verified that the rotation error correction function of Leksell GammaPlan$^{(R)}$ is working fine. Conclusion: A virtual phantom was built to verify software functions of stereotactic neurosurgery treatment planning program. The error correction function of a commercial treatment planning program worked within nominal error range. The virtual phantom of this study can be applied in many other fields to verify various functions of treatment planning programs.

• International Journal of Quality Innovation
• /
• v.8 no.3
• /
• pp.156-172
• /
• 2007

The high-tech industry is the economic lifeline for Taiwan. Its characteristics are short product life cycle, rapid changes in the market, and a high obsolescence rate for new products. Under globalization, the high-tech industry has adopted Information Technology (IT) to shorten the manufacturing process, reduce costs and conduct product research and development (R&D) to increase the core competence of enterprises and achieve the goal of sustainable operations. Enterprises should actively strengthen their integration with internal and external resources and lead in R&D management to increase industrial operating performance. Effectively managing operations and R&D management evaluation in Taiwan's High-tech Industry has become a critical subject. This study adopted 4 major Balanced Scorecard (BSC) perspectives to establish the Total Performance Evaluation Indicators for the R&D management department in Taiwan's High-tech Industry. The Analytic Network Process (ANP) was applied to evaluate the overall performance of the R&D management department. The research framework is divided into 2 phases. The first phase is combined with the 4 major perspectives, Financial, Customer, Internal Business Process and Learning and Growth, as the related indicators for each measurement perspective. The Key Performance Indicators (KPI) were selected using Factor Analysis to identify the key factor from the complicated indicators. The relationship between the characteristics of each BSC's evaluation perspective is dependence and feedback. This study applied ANP to conduct the calculation and adjustment of correlation between each KPI, and determine on their relative weights for the objective KPI. The "Financial Perspective" for R&D management department in Taiwan's High-tech Industry focused on the budget achievement rate of R&D management. The weight indicator value is (0.05863). The "Customer Perspective" focused on problem-solving satisfaction. The weight value of this indicator is (0.17549). The "Internal Business Process Perspective" focused on the quantity and quality of R&D. The weight value of this indicator is (0.13506). The "Learning and Growth Perspective" focused on improving competence in the research personnel's professional techniques. The weight value of this indicator is (0.02789). From the total weighting indicators, the order of the Performance Indicators for the R&D management department in Taiwan's High-tech Industry is: (1) Customer Perspective; (2) Internal Business Process Perspective; (3) Financial Perspective; and (4) Learning and Growth Perspective.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.6
• /
• pp.1133-1143
• /
• 2016

The purpose of this study is to improve project performance analysis indicators for BTL sewer rehabilitation projects. Among the assessment indicators for BTL sewer rehabilitation projects, an infiltration assessment indicator is given a high score of 17.5 points as a single assessment item. This infiltration assessment indicator is assessed focusing on the amount of infiltration, and presently calculated according to 'Nighttime Domestic Flow Evaluation' method. However, this assessment indicator's failure to reflect the geological features of Jeju region is emerging as a problem in the operational stage. Thus, this study intended to compare and analyze the calculation result depending on the assessment indicators and the actual amount of infiltration, centering on Jeju region. To this end, this study analyzed the amount of infiltration in five areas of Jeju Province calculated according to 'Nighttime Domestic Flow Evaluation' method. Also, a complete enumeration survey was carried out about the conditions for actual infiltration occurrence. According to the results of this survey, ground water level is distributed lower than the level of sewer pipes. The results of a sewer pipe function test show there was no infiltration occurrence caused by sewer pipe defect. So, it is concluded that 'Nighttime Domestic Flow Evaluation' method, which is utilized for the current assessment indicator, is not appropriate to apply to Jeju region, and it is thought that there is a need to establish infiltration criteria specialized for Jeju region.

• Journal of Distribution Science
• /
• v.14 no.3
• /
• pp.63-71
• /
• 2016

Purpose - A variety of indicators are used for the diagnosis of economic situation. However, most indicators explain the past economic situation because of the time difference between the measurement and announcement. This study aims to argue for the resurrection of an idea: electricity demand can be used as an indicator of economic activity. In addition, this study made an endeavor to develop a new Real Business Index(RBI) which could quickly represent the real economic condition based on the sales statistics of industrial and public electricity. Research design, data, and methodology - In this study monthly sales of industrial and public electricity from 2000 to 2015 was investigated to analyze the relationship between the economic condition and the amount of electricity consumption and to develop a new Real Business Index. To formulate the Index, this study followed next three steps. First, we decided the explanatory variables, period, and collected data. Second, after calculating the monthly changes for each variable, standardization and estimating the weighted value were conducted. Third, the computation of RBI finalized the development of empirical model. The principal component analysis was used to evaluate the weighted contribution ratio among 3 sectors and 17 data. Hodrick-Prescott filter analysis was used to verify the robustness of out model. Results - The empirical results are as follows. First, compatibility of the predictability between the new RBI and the existing monthly cycle of coincident composite index was extremely high. Second, two indexes had a high correlation of 0.7156. In addition, Hodrick-Prescott filter analysis demonstrated that two indexed also had accompany relationship. Third, when the changes of two indexes were compared, they were found that the times when the highest and the lowest point happened were similar, which suggested that it is possible to use the new RBI index as a complementing indicator in a sense that the RBI can explain the economic condition almost in real time. Conclusion - A new economic index which can explain the economic condition needs to be developed well and rapidly in a sense that it is useful to determine accurately the current economic condition to establish economic policy and corporate strategy. The salse of electricity has a close relationship with economic conditions because electricity is utilized as a main resource of industrial production. Furthermore, the result of the sales of electricity can be gathered almost in real time. This study applied the econometrics model to the statistics of the sales of industrial and public electricity. In conclusion, the new RBI index was highly related with the existing monthly economic indexes. In addition, the comparison between the RBI index and other indexes demonstrated that the direction of the economic change and the times when the highest and lowest points had happened were almost the same. Therefore, this RBI index can become the supplementary indicator of the official indicators published by Korean Bank or the statistics Korea.