• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.253-259
• /
• 2002

The rigid body characteristics (value of mass, Position of center of mass, moments and products of inertia) of mechanical systems can be identified from FRF data or vibration spectra of rigid body motion. Therefore the accuracy of rigid body characteristics is connected directly with the accuracy of measured data for rigid body motions. In this paper, a method of improving accuracy of measurement of rigid body motion is presented. Applying rigid body theory, ail translational and rotational displacements at a tentative point on the rigid body are calculated using the measured translational displacements for several points and transfer matrix. Then the estimated displacements for the identical points are calculated using the 6 displacements of the tentative Point and transfer matrix. By using correlation coefficient between measured and estimated displacements, we can detect the existence of errors that are contained in a certain measured displacement. Consequently, the improved rigid body motion with respect to a tentative point can be obtained by eliminating the contaminated data.

• Journal of electromagnetic engineering and science
• /
• 제10권4호
• /
• pp.231-236
• /
• 2010

This study proposes a temperature compensation method of the complex permittivities of biological tissues and organs. The method is based on the temperature dependence of the Debye model of water, which has been thoroughly investigated. This method was applied to measured data at room temperature for whole blood, kidney cortex, bile, liver, and heart muscle. It is shown that our method can compensate for the Cole-Cole model using measured data at 20 $^{\circ}C$, given the Cole-Cole model based on measured data at 35 $^{\circ}C$, with a root-mean-squared deviation of 3~11 % and 2~6 % for the real and imaginary parts of the complex permittivities, respectively, among the measured tissues.

• 한국기후변화학회지
• /
• 제7권4호
• /
• pp.397-405
• /
• 2016

For better understand of the soil respiration characteristic in ecosystem, it is necessary to accurately determine the daily, monthly and seasonal $CO_2$ flux related to various environmental factors. In general, soil respiration is being measured on a sunny day. But soil respiration is known to be affected by soil temperature and soil moisture content. In case of forestry, changes in soil moisture content are entirely dependent on rainfall. If we calculated the monthly soil respiration measured based on sunny days data only, it could be a factor that loses credibility soil respiration. On this study, we measured soil respiration on Pinus koraiensis plantation at Mt. Taehwa of Gwangju, Gyeonggi-do on sunny and rainy days in 2012, using Automatic Open-Closed Chamber system (AOCC) and portable $CO_2$ analyzer (GMP343). Then we computed the regression equations using sunny days data, precipitation less than 10 mm data, and precipitation over 10 mm data. At first, there were no significant differences in observed data and computed data. But less than 10 mm precipitation, computed data was 26.5% lower than observed data. Precipitation over 10 mm, on the other hand, the former was 29.3% higher than the latter. In each case, it showed significant differences between observed and computed data (p<0.05). So if we computed regression equation using soil respiration measured sunny days only, about 30% of annual soil respiration could be overestimated. Through further study, we suggest the subdivision and computation of regression equation on the basis of the rainfall intensity.

• 헤리티지:역사와 과학
• /
• 제41권1호
• /
• pp.21-33
• /
• 2008

충청지역의 다양한 유적의 소토(燒土)에서 구한 34점의 고고지자기 측정데이터를 통해 충청지역의 고고지자기 변동 양상을 살펴보고, 더 나아가 국내에서의 지자기의 지역적인 차이에 대해 검토해 보았다. 충청지역의 고고지자기 측정데이터는 거리상으로 차이가 있는 일본의 고고지자기 변동과의 비교에서 보면, 전체적인 변동 모습은 비슷하나 A.D. 300년경에서는 편각이 동쪽으로 10도 이상 치우치는 현저한 차이를 보이고, 그 이외 시기에서는 복각이 다소 깊어지고 편각이 서쪽으로 약간씩 치우치는 지자기의 지역적인 차이가 확인되었다. 이러한 양상은 우리나라 전체의 고고지자기 변동 양상과 큰 차이가 없으며, 충청지역 데이터와의 직접 비교에서도 국내에서는 서력기원전시기와 기원후 시기 모두 뚜렷한 지자기의 지역차는 확인되지 않았다. 앞으로 더 많은 고고지자기 측정 데이터가 증가하고 다양한 시기의 데이터가 채워지면 더욱 명확해 지겠지만, 충청지역 유적의 고고지자기 측정결과를 통해 볼 때, 지자기의 지역적인 차이에 의해 발생하는 고고지자기 측정연대의 오차와 같은 문제점은 우리나라 내에서는 크게 걱정하지 않아도 될 듯하다. 게다가 시료의 채취와 측정에서 신뢰가 가능한 측정데이터를 구하기 위하여 많은 노력들을 하고 있기 때문에, 고고지자기 측정결과에서 추정연대의 오차문제 뿐만 아니라 데이터의 신뢰도의 측면에서도 문제가 없을 것이라 생각된다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(2)
• /
• pp.68-71
• /
• 2000

In this paper, we have measured the oxygen contents by FTIR in silicon wafer various process technology(slicing, lapping, polishing). The measured data are also compared with the data of etching process(KOH, Bright etching). Also we have measured the surface morpology in backside silicon wafer after etching treatment and etch pit density due to OISF after 4 step high temperature annealing process with optical microscope.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2002년도 추계학술대회 논문집(II)
• /
• pp.1086-1093
• /
• 2002

In Korea mid chord offset method has been used to measure the track irregularities. This method has been also used all over the world widely because of its accessibility and the operational excellence for measured data. But it has been pointed out recently that track irregularities reconstructed from measured data have unexpected noise in the high frequency area as the defect of this way. This study shows the cause of noise which occurs during reconstructing process and mentions the solutions briefly.

• 소음진동
• /
• 제6권3호
• /
• pp.333-339
• /
• 1996

The absorption coefficients of 3 largely reticulated urethan foams are measured by transfer function method which uses two microphones in an impedance tube. Based on the previously published data, the new modified empirical equations for predicting the characteristic impedance and propagation constant of the largely reticulated urethane foams are developed. Comparison is made between the measured data and the predicted data, based on the previously published equations and the new equation. Good agreement of the absorption coefficient between the measured and predicted data by the new modified empirical equation has been obtained.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회
• /
• pp.404-415
• /
• 2010

In this paper, using the TDR sensors, variation of soil water content changes were measured as TDR data. Then filtering technique was determined using Fourier transform. Determine the moisture content of soil and ground water level and tried to determine unsaturated zone. First, variation of water content changes were measured TDR data by indoor experiment. Then as a function of TDR data made for water content of soil. Next, through Acrylic indoor laboratory model experiments, changes in ground water levels and lateral penetration of the field conditions were reproduced in an indoor. Field applicability of the TDR sensor was demonstrated by analysis of this. TDR sensor was installed in the embankment, TDR data were measured by TDR sensor.

• 한국환경과학회지
• /
• 제14권12호
• /
• pp.1155-1161
• /
• 2005

Anoxic-oxic process were analyzed numerically for the each unit and final TN effluent by Water Quality Management(WQM) model and the results were compared data from these sewage or wastewater treatment plants. No bugs and logic error were occurred during simulation work. All of the simulation results tried to two times were obtained and both results were almost same thus this model has good reappearance. A few of simulation results were deviated with measured data because lack of influent water qualities are reported however simulation results have wholly good relationship with measured data. Also each unit of simulation result was kept good relationship with that of measured data therefore this WQM model has good reliance. Finally, WQM model predicts final TN effluent within ${\pm}4.1\;mg/{\ell}$

• 조명전기설비학회논문지
• /
• 제25권12호
• /
• pp.101-106
• /
• 2011

An utilization of electricity usage measured data by region and time through the consumer portal system for building and large consumer are suggested. Electricity usage data by region and time can't be measured by traditional approach. A measured data from smart meters which are installed various regions can be utilized to set up a management of electricity peak demand.