• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.34 no.6
• /
• pp.635-639
• /
• 2008

Objectives : the effect of different sterilization methods on the surface morphology of PPDO-hybrid-PLGA nanofiber scaffold and attachments of PC12 cell were investigated. Methods : Poly (p-dioxone)-hybrid-Poly (lactide-glycolide) (PPDO-hybrid-PLGA) nanofiber scaffold, fabricated in a tube form with 1.5 mm internal diameter, 0.2 mm thickness and 5 mm length, was prepared using electrospinning method. To study the surface morphology using SEM, The study group and control group in respective were; Control:Non-sterilized scaffold, Group I:scaffold sterilized with 70% Alcohol, Group II: scaffold sterilized with Ethylene Oxide at $65^{\circ}C$, and Group III: scaffold sterilized with Ethylene Oxide at $37^{\circ}C$. To investigate viability of the PC12 cell on the scaffold, The study group and control group in respective were; Control: sterilized with 70% Alcohol, Group I: sterilized with Ethylene Oxide at $65^{\circ}C$, and Group II: sterilized with Ethylene Oxide at $37^{\circ}C$. Results : 1. The surface morphology was slightly changed in Group I, II and Group III, compared with control. 2. The attachment of PC12 cells in Group I, II was not higher than in control Discussion : The attachment of PC12 cell is not influenced by different sterilization methods.

• Imaging Science in Dentistry
• /
• v.54 no.2
• /
• pp.147-157
• /
• 2024

Purpose: The aim of this study was to explore the correlations of cone-beam computed tomographic findings with the apnea-hypopnea index in patients with obstructive sleep apnea. Materials and Methods: Forty patients with obstructive sleep apnea were selected from the ear-nose-throat (ENT) outpatient clinic, Faculty of Medicine, Mansoura University. Cone-beam computed tomography was performed for each patient at the end of both inspiration and expiration. Polysomnography was carried out, and the apnea-hypopnea index was obtained. Linear measurements, including cross-sectional area and the SNA and SNB angles, were obtained. Four oral and maxillofacial radiologists categorized pharyngeal and retropalatal airway morphology and calculated the airway length and volume. Continuous data were tested for normality using the Kolmogorov-Smirnov test and reported as the mean and standard deviation or as the median and range. Categorical data were presented as numbers and percentages, and the significance level was set at P<0.05. Results: The minimal value of the cross-sectional area, SNB angle, and airway morphology at the end of inspiration demonstrated a statistically significant association (P<0.05) with the apnea-hypopnea index, with excellent agreement. No statistically significant difference was found in the airway volume, other linear measurements, or retropalatal airway morphology. Conclusion: Cone-beam computed tomographic measurements in obstructive sleep apnea patients may be used as a supplement to a novel radiographic classification corresponding to the established clinical apnea-hypopnea index classification.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.38
• /
• pp.38.1-38.10
• /
• 2016

Background: The aims of this study are to evaluate the lip morphology and change of lip commissure after mandibular setback surgery (MSS) for class III patients and analyze association between the amount of mandibular setback and change of lip morphology. Methods: The samples consisted of 14 class III patients treated with MSS using bilateral sagittal split ramus osteotomy. Lateral cephalogram and cone-beam CT were taken before and about 6 months after MSS. Changes in landmarks and variables were measured with 3D software program $Ondemand^{TM}$. Paired and independent t tests were performed for statistical analysis. Results: Landmarks in the mouth corner (cheilion, Ch) moved backward and downward (p < .005, p < .01). However, cheilion width was not statistically significantly changed. Landmark in labrale superius (Ls) was not altered significantly. Upper lip prominence angle (ChRt-Ls-$ChLt^{\circ}$) became acute. Landmarks in stomion (Stm), labrale inferius (Li) moved backward (p < .005, p < .001). Lower lip prominence angle (ChRt-Li-$ChLt^{\circ}$) became obtuse (p < .001). Height of the upper and lower lips was not altered significantly. Length of the upper lip vermilion was increased (p =< 0.01), and length of the lower lip vermilion was decreased (p < .05). Lip area on frontal view was not statistically significantly changed, but the upper lip area on lateral view was increased and change of the lower lip area decreased (p > .05, p < .005). On lateral view, upper lip prominent point (UP) moved downward and stomion moved backward and upward and the angle of Ls-UP-Stm ($^{\circ}$) was decreased. Lower lip prominent point (LP) moved backward and downward, and the angle of Stm-LP-Li ($^{\circ}$) was increased. Li moved backward. Finally, landmarks in the lower incisor tip (L1) moved backward and upward, but stomion moved downward. After surgery, lower incisor tip (L1) was positioned more superiorly than stomion (p < .05). There were significant associations between horizontal soft tissue and corresponding hard tissue. The posterior movement of L1 was related to statistically significantly about backward and downward movement of cheilion. Conclusions: The lip morphology of patients with dento-skeletal class III malocclusion shows a significant improvement after orthognathic surgery. Three-dimensional lip morphology changes in class III patients after MSS exhibited that cheilion moved backward and downward, upper lip projection angle became acute, lower lip projection angle became obtuse, change of upper lip area on lateral view was increased, change of lower lip area decreased, and morphology of lower lip was protruding. L1 was concerned with the lip tissue change in statistically significant way.

• The korean journal of orthodontics
• /
• v.34 no.4 s.105
• /
• pp.279-287
• /
• 2004

In growing patients with Class III malocclusion, the various patterns of maxillofacial growth are a key element that affects the success or failure of treatment. Therefore it is important to correctly predict maxillofacial growth before initiating treatment. The purpose of this study was to find out the correlation between the maxillofacial morphology of parents and their Class III children by analyzing lateral cephalograms and hereditary factors. Among Class III preadolescent children, 50 families were obtained. To find out the specific hereditary factors involved, fingerprints were obtained and genetic correlation with the maxillofacial morphology was analyzed. The following conclusions were made. 1. A significant correlation (P<0.05-0.00l) was found in many of the cephalometric measurements between the offspring and their parents. The correlation in the skeleton measurements was higher than in the denture measurements. The father-offspring correlation was higher than the mother-offspring correlation 2. A significant correlation (P<0.05-0.00l) was found in fingerprint units between the offspring and their parents. The mother-offspring correlation was higher than the father-offspring correlation. 3. Between the maxillofacial morphology and fingerprint units, there was significant genetic correlation (P<0.05-0.01). Based on the analysis of genetic correlation, higher correlation was found in the parent-son pairing than the parent-daughter pairing.

• Imaging Science in Dentistry
• /
• v.31 no.3
• /
• pp.145-151
• /
• 2001

Purpose : To investigate the hypothesis that the morphology of the articular eminence of the temporomandibular joint is a predisposing factor for disc displacement. Materials and Methods: MR images of 126 temporomandibular joints in 94 patients were analyzed to assess for morphology of the articular eminence and disc displacement. The displaced disc was further categorized as disc displacement with reduction (DDWR) and disc displacement without reduction (DDWOR). The morphology of the articular eminence was classified into four types; box, sigmoid, flattened, and deformed. The relationship between the four types of shape of the articular eminence and the two types of disc position was assessed. Results: In the DDWR and DDWOR groups, the morphology of articular eminence were a box type in 40.5%, a sigmoid type in 30.2%, a flattened type in 24.6%, and a deformed type in 4.7%. The box type of the articular eminence were 34.3% in the DDWR group and 42.9% in the DDWOR group. The sigmoid type of the articular eminence were 34.3% in the DDWR group and 28.6% in the DDWOR group. The flattened type of the articular eminence were 28.6% in the DDWR group and 23.1 % in the DDWOR group. The deformed type of articular eminence were 2.9% in the DDWR group and 5.5% in the DDWOR group. Conclusion: Disc displacement is more likely to be found in the temporomandibular joints with a box-shaped articular eminence. It can be considered that shape of the articular eminence is related to the development of disc displacement.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.25 no.2
• /
• pp.459-470
• /
• 1995

The purpose of this study was to determine whether any difference existed in craniofacial morphology between cleft children and normal subjects. Thirty three measurements of the various regions of cranium and face were obtained from lateral cephalometric radiograms in 40 cleft children(27 males, 13 females) and 40 normal subjects(23 males, 17 females) in our dental hospital from Jan. 1988 to Dec. 1995.The measurements were compared with those in control subjects who had no history of craniofacial abnormalities. The obtained results were as follows: 1. In the cranium, the cleft children had singificantly shorter posterior cranial base length(S-Ba) and total antero-posterior cranial base length(N-Ba) (P<0.05). 2. In the upper face, the cleft children had significantly shorter upper anterior facial height(N-ANS) and upper posterior facial height(Ptm'-SNL) (P<0.05). 3. In the lower face, the cleft children had significantly shorter antero-posterior mandibular length(Pog-Ar) and antero-posterior mandibular body length(Pog-Go) (P<0.05). 4. In the facial profile, the cleft children had significantly shorter total facial height(N-Me} and posterior facial height(S-Go) (P<0.05).

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.32 no.6
• /
• pp.575-579
• /
• 2006

Purpose : The purpose of this study was to evaluate peri-implant bone loss and implant success on anterior maxillary alveolar ridges and Compare Class III and Class IV ridges in the aspect of peri-implant bone loss. Material and Methods : 14 patients (aged 21 to 68, 6males and 8females), who lacked maxillary anterior teeth and were installed from January 2000 to April 2003 at Samsung Medical Center, were selected. The type of implant used included 30 $Br\ddot{a}nemark$ implant. They were taken with digital tomographic and conventional intraoral radiographic examinmation, and were treated with implant installaion without bone augmentation. The peri-implant bone resorption was measured at the mesial and distal aspect of implant on the conventional intraoral radiographs. Results : The study classified the anterior maxillary alveolar ridge and measured peri-implant bone resorption from the period of implant installation to the 2nd year after functional loading radiographically. The study revealed no statistically significant difference between two groups, which was classified by its morphology. The average bone resorption on healing period before loading was 0.18mm and 0.18mm, the 1st year of loading period, 0.77 mm and 0.84mm, and on the 2nd year of loading period, 0.07mm and 0.06mm, respectively on both Class III and class IV. Conclusion : In the knife edge form of anterior maxillary residual ridges(Class IV), implant placement without ridge augmentation does not have significant difference with that of Class III alveolar ridge in the concern of Implant success after 2 year functional loading period in the aspect of peri-implant bone resorption radiographically.

• Imaging Science in Dentistry
• /
• v.30 no.4
• /
• pp.287-292
• /
• 2000

A case of dento-maxillofacial abnormality involving a 10-year-old male patient with a history of esthesioneuro-blastoma is presented. This patient had been treated with 54 Gy /sup 60/Co-gamma-radiation to the nasal cavity for 6 weeks and 6 cycles of combination chemotherapy of Cyclophosphamide, Cisplatin, Adriamycin, VM-26 (Tenipo-side), and DTIC (Dacarbazine) when he was 16 months of age. Five years after cessation of cancer therapy, he was disease free and transferred for extensive dental care to Kyung Hee University Dental Hospital. A clinical and radiologic follow-up over last 4 years showed root stunting, premature closure of the root apices, microdontia, developmental arrest, small crowns, and partial anodontia. Maxillofacial morphology evaluated by cephalometric analysis showed deficiency of maxillary development.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.27 no.2
• /
• pp.118-128
• /
• 2001

Two major salivary glands, submandibular duct, lingual nerve, and vessels are situated beneath the mouth floor. Among these, passing through the pterygomandibular space, lingual nerve is innervated to the lingual gingiva and the mucosa of mouth floor, and is responsible for the general sensation of the anterior two thirds of the tongue. So, the injury of the lingual nerve during an anesthesia or surgery in the retromolar area may cause complications such as a numbness, a loss of taste of the tongue and the other dysfunctions. Therefore, to find out the morphology and the course of lingual nerve and to clarify the topographical relationships of lingual nerve at the infratemporal fossa and paralingual space area, 32 Korean hemi-sectioned heads were dissected macroscopically and microscopically with a viewpoint of clinical aspect in this study. This study demonstrated various anatomical characteristics with relation to the course and topography of the lingual nerve in Koreans. And clinical significances based on the anatomical variations through the topography of the courses and communications between the mandibular nerve branches were described in details.

• Imaging Science in Dentistry
• /
• v.37 no.1
• /
• pp.19-26
• /
• 2007

Purpose : To examine whether the maxillofacial skeletal morphology correlates with the condylar position and the anatomic characteristics of articular eminence using measurements of lateral cephalometric radiographs and individualized sagittal temporomandibular joint (TMJ) tomographs. Materials and Methods : I compared measurements of 202 TMJs of 101 orthodontic patients of Kangnung National University Dental Hospital. 1 used Pearson's correlation for comparison of the measuring values in lateral cephalometric radiographs and individualized sagittal TMJ tomographs. Results : Large occlusal plane angle tendency showed decreased width of posterior eminence slope, decreased depth of articular fossa and decreased posterior slope angle of eminence. Large mandibular plane angle tendency showed decreased superior joint space, decreased depth of articular fossa and decreased posterior slope angle of eminence. Large genial angle tendency showed decreased depth of articular fossa, decreased posterior slope angle of eminence and anterior position of condylar head. Large anterior facial height and large posterior facial height tendency showed increased width of posterior slope of eminence, increased depth of articular fossa, increased posterior slope angle of eminence and posterior position of condylar head. Conclusion : Maxillofacial skeletal morphology has correlation with the anatomic characteristics of TMJ. Individualized sagittal TMJ tomographs can provide useful information for anatomical analysis of TMJ.