• Journal of Broadcast Engineering
• /
• v.26 no.3
• /
• pp.327-330
• /
• 2021

In this paper, a new noise filling method is proposed for improving the performance of the 3D audio codec. In the new method, the core band is limited up to MAX_SFB, not up to the IGF start frequency. And the noise filling is applied to all frequency range of the IGF source patches. We conduct the MUSHRA test and find that the proposed noise filling method demonstrates better performance than the conventional method.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.10
• /
• pp.14-22
• /
• 2010

The source/channel/drain regions are formed by ion implantation with different dopant types of $n^+/p^{(+)}/n^+$ in the fabrication of the conventional n-type metal-oxide-semiconductor field effect transistor(NMOSFET). In implementing the ultra-small devices with channel length of sub-30 nm, in order to achieve the designed effective channel length accurately, low thermal budget should be considered in the fabrication processes for minimizing the lateral diffusion of dopants although the implanted ions should be activated as completely as possible for higher on-current level. Junctionless (JL) MOSFETs fully capable of the the conventional NMOSFET operations without p-type channel for enlarging the process margin are under researches. In this paper, the optimum design of the JL MOSFET based on silicon nanowire (SNW) structure is carried out by 3-D device simulation and the basic radio frequency (RF) characteristics such as conductance, maximum oscillation frequency($f_{max}$), current gain cut-off frequency($f_T$) for the optimized device. The channel length was 30 run and the design variables were the channel doping concentration and SNW radius. For the optimally designed JL SNW NMOSFET, $f_T$ and $f_{max}$ high as 367.5 GHz and 602.5 GHz could be obtained, respectively, at the operating bias condition $V_{GS}$ = $V_{DS}$ = 1.0 V).

• Journal of Power Electronics
• /
• v.17 no.4
• /
• pp.849-859
• /
• 2017

This paper illustrates the analysis and design of a multi-resonant converter applied to an electric vehicle (EV) charger. Thanks to the notch resonant characteristic, the multi-resonant converter achieve soft switching and operate with a narrowed switching frequency range even with a wide output voltage range. These advantages make it suitable for battery charging applications. With two more resonant elements, the design of the chosen converter is more complex than the conventional LLC resonant converter. However, there is not a distinct design outline for the multi-resonant converters in existing articles. According to the analysis in this paper, the normalized notch frequency $f_{r2n}$ and the second series resonant frequency $f_{r3n}$ are more sensitive to the notch capacitor ratio q than the notch inductor ratio k. Then resonant capacitors should be well-designed before the other resonant elements. The peak gain of the converter depends mainly on the magnetizing inductor ratio $L_n$ and the normalized load Q. And it requires a smaller $L_n$ and Q to provide a sufficient voltage gain $M_{max}$ at ($V_{o\_max}$, $P_{o\_max}$). However, the primary current increases with $(L_nQ)^{-1}$, and results in a low efficiency. Then a detailed design procedure for the multi-resonant converter has been provided. A 3.3kW prototype with an output voltage range of 50V to 500V dc and a peak efficiency of 97.3 % is built to verify the design and effectiveness of the converter.

• Journal of information and communication convergence engineering
• /
• v.15 no.4
• /
• pp.199-204
• /
• 2017

A compact dual-band half-ring-shaped (HRS) bent slot antenna fed by a coplanar waveguide for wireless local area network (WLAN) and worldwide interoperability for microwave access (WiMAX) applications is presented. The antenna consists of two HRS slots with different lengths and widths. The two HRS slots are connected through an arc-shaped slit, and the upper HRS slot is bent in order to reduce the size of the antenna. The optimized dual-band HRS bent slot antenna operating in the 2.45 GHz WLAN and 3.5 GHz WiMAX bands is fabricated on an FR4 substrate with dimensions of 30 mm by 30 mm. The slot length of the proposed dual-band slot antenna is reduced by 35%, compared to a conventional dual-band rectangular slot antenna. Experimental results show that the proposed antenna operates in the frequency bands of 2.40-2.49 GHz and 3.39-3.72 GHz for a voltage standing wave ratio of less than 2, and measured gain is larger than 1.4 dBi in the two bands.

• Journal of Plant Biotechnology
• /
• v.3 no.2
• /
• pp.101-106
• /
• 2001

In order to establish efficient plant regeneration from embryogenic suspension cultures of soybean, Glycine max L, we examined the effects of auxin type and concentration, cytokinin type and concentration, and amino acid type and concentration on the growth of embryogenic clumps from induced callus, and the effect of desiccation of mature somatic embryos obtained from these clumps on the frequency of somatic embryo germination. Embryogenic callus was induced from the edge of the cotyledons cultured on MS medium containing 6% sucrose, 40 mg/L 2,4-D, 0.2% gelrite and pH 5.7. The growth of embryogenic clumps was best in early staged, embryogenic callus that was placed in suspension culture of MS medium containing 5 mg/L 2,4-D and 0.5 mg/L asparagine. Single somatic embryos were isolated from the clumps and plated on the same medium for maturation. When the mature single somatic embryos were desiccated for 96 h, somatic embryo germination came up to approximately 90%. The plantlets germinated after embryos desiccation for 2 weeks were transfered to MS medium containing 3% sucrose,0.2% gelrite and pH 5.7.

• Fire Science and Engineering
• /
• v.31 no.5
• /
• pp.117-122
• /
• 2017

The absence of fire fighters' connection to communication can bring about increased loss of life due to errors and delays in rescue and actions and danger to their own safety. Therefore, when communication infrastructure has been destroyed in an enclosed space, it is necessary to set up an emergency wire or wireless telecommunication environment to fire fighting and to secure safer environment to deal with the disaster by checking the location of fire fighters. In this research, for the establishment communication environment in an enclosed inside using Ultra-Wide Band (UWB) wireless communication network, the performance of communication position determination of a single UWB communication module was evaluated regarding 6 kinds of indoor surroundings. When the communication distance in an indoor environment of each 6 channels bandwidth of UWB communication frequency was measured, the results were as follows: the open space (Ave. 15.5 m, Max. 20 m), the corridor (Ave. 17.33 m, Max 20 m), inside retaining home furnishings (Ave. 15.3 m, Max. 20 m), vertical stairs (Ave. 4.33 m, Max. 6 m), horizontal space with a closed fire door (Ave. 6.5 m, Max. 17 m). It was also found out that the communication function and the distance function were best in the frequency range from 6489.6 to 1081.6 MHz by 7 Ch. Accordingly, the establishment of communication environment in an enclosed space is judged to be possible when UWB communication module is set up at 20 m apart and multiple channels are used.

• The KIPS Transactions:PartC
• /
• v.17C no.6
• /
• pp.471-484
• /
• 2010

In the wireless communication systems, the power consumption of a mobile device is very important issue due to its battery limitations. Hence most of the standards for wireless networks including a mobile WiMAX system are supporting their own power saving mode in way that a mobile device is able to reduce its energy usage while in the mode. However, those standards just define the arrangement of special time intervals, called a paging listening interval, during which the device needs to receive the paging-related control messages, and they do not specify how to effectively reduce the power in many different network environments. This means the amount of power spent by the device is very dependent on the implementations of individual device-vendors, and undesirable paging loss may happen according to the channel conditions. To reduce unnecessary power usage and the risk of paging loss, this paper proposes the effective frequency/BS selection algorithm applicable to a mobile device operating in the power saving mode, which serves the device with better BS based on the tracking for channel variation. This algorithm consists of the channel estimation phase during each paging listening interval, the tracking phase for the measured results, the frequency reselection phase based on the tracking activity, and the preferred BS reselection phase. Thus the proposed method can improve the paging performance while the device is moving in the network. Also the simulation result shows that the presented scheme is superior to other candidates in energy efficiency due to the channel-adaptive frequency/BS selection.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.31 no.5
• /
• pp.241-252
• /
• 2019

To choose appropriate countermeasures against potential coastal disaster damages caused by a storm surge, it is necessary to estimate the frequency of storm surge heights estimation. As the coastal populations size in the past was small, the tropical cyclone risk model (TCRM) was used to generate 176,689 synthetic typhoons. In simulation, historical paths and central pressures were incorporated as a probability density function. Moreover, to consider the typhoon characteristics that resurfaced or decayed after landfall on the southeast coast of China, incorporated the shift angle of the historical typhoon as a function of the probability density function and applied it as a damping parameter. Thus, the passing rate of typhoons moving from the southeast coast of China to the south coast has improved. The characteristics of the typhoon were analyzed from the historical typhoon information using correlations between the central pressure, maximum wind speed ($V_{max}$) and the maximum wind speed radius ($R_{max}$); it was then applied to synthetic typhoons. The storm surges were calculated using the ADCIRC model, considering both tidal and synthetic typhoons using automated Perl script. The storm surges caused by the probabilistic synthetic typhoons appear similar to the recorded storm surges, therefore this proposed scheme can be applied to the storm surge simulations. Based on these results, extreme values were calculated using the Generalized Extreme Value (GEV) method, and as a result, the 100-year return period storm surge was found to be satisfactory compared with the calculated empirical simulation value. The method proposed in this study can be applied to estimate the frequency of storm surges in coastal areas.

• Proceedings of the KIEE Conference
• /
• 2006.07a
• /
• pp.48-49
• /
• 2006

Recently, Importance of Generator's Active/Reactive Power Control Capability is highly emphasized for prevention of Large Blackout. Especially, Generator's frequency Response Capability is important to the Power System Frequency Stability. This paper deals with the Development & Implementation of Each Generator Frequency Response Capability Test via the Injection of Artificial Frequency to the Online Generator. Actual On-line Generator's frequency Response Test was successfully implemented to 13 Generator having various fuel source.

• Journal of Nutrition and Health
• /
• v.35 no.2
• /
• pp.223-228
• /
• 2002

The purpose of this study was to investigate the relationship between iron deficiency without anemia and physical performance in healthy women aged 20-21 yrs. Ten subjects with normal iron stores (serum ferritin $\geq$ 12$\mu\textrm{g}$/L: iron-sufficient group) and 11 subjects with iron depletion without anemia (serum ferritin < 12 $\mu\textrm{g}$/L and serum hemoglobin > 120 g/L: iron-depleted group) were chosen from a group of 50 women and were given physical-performance tests, including determinations of maximum oxygen consumption (VO$_2$ max) and ventilatory threshold. Iron status assessment included determination of hemoglobin, hematocrit, seam ferritin, total iron-binding rapacity, serum iron and transferrin saturation values. Dietary iron intake was assessed based on seven-day food intake records written by the subjects. Physical activity level was estimated by frequency questionnaires and two-week physical activity records were compiled daily by the subjects. Blood ferritin concentration was significantly lower in the iron-depleted group than in the iron-sufficient group (p < 0.05). However, other variables showing iron status was not different between the groups. There were no significant differences in body size, body composition and physical activity levels between the groups. Daily dietary iron, total protein and animal protein intakes of the iron-sufficient group were significantly higher than those of the iron depleted group. However, no differences were found in the amount of dietary vitamin C and fiber between the groups. The values for VO$_2$max and VO$_2$max corrected with weight or fat-free mass were not different between the groups. However, the ventilatory threshold was significantly higher in the iron sufficient group than in the iron-depleted group. The lower ventilatory threshold in the iron-depleted group suggests that iron depletion without anemia could diminish aerobic physical performance in young women. In addition, a significant correlation of physical performance to serum fferritin level was shown only in the iron depleted group.