• 한국세라믹학회지
• /
• 제36권10호
• /
• pp.1094-1101
• /
• 1999

Liquid phase sintered silicon carbides were obtained by sintering of $\alpha$-SiC and $\beta$-SiC powders as starting materials at 2173K and 2273K respectively. The SiCplatelet seeds of different sizes were obtained by a repeated ball milling and sedimentation. Their mean size (d50) were 2.217 ${\mu}{\textrm}{m}$ 13.67 ${\mu}{\textrm}{m}$, 22.17${\mu}{\textrm}{m}$ respectively 6wt%Al2O3-4 wt% Y2O3 was used as the sintering additives for the liquid phase sintering. The two silicon carbides had a bimodal microstructure consisting of small matrix grains and large platelike grains when the SiCplatelet seeds were added. In the case of the $\beta$-SiC the appreciable phase transformation occurred as sintering temperature increased from 2173K to 2273K and resulted in matrix shape change from equiaxed into platelike grains. In contrast there was no shape change for the $\alpha$-SiC. The size of large grains in the $\alpha$-SiC of large grains in the $\alpha$-SiC was larger than that of the large grains in the $\beta$-SiC These results suggested that the growth of the $\alpha$-SiCplatelet in the $\alpha$-SiC matrix was more favored than that of the $\alpha$-SiCplatelet in the $\beta$-SiC matix. The three point flexural strength decreased as the added seed size increased. Fracture toughness values of samples sintered at 2273K were higher than those of samples sintered at 2173K.

• 한국세라믹학회지
• /
• 제31권7호
• /
• pp.703-714
• /
• 1994

Sintering and microstructure of Ce-TZP/Al2O3 composite with $\alpha$-Al2O3 matrix containing dispersed 5~50 vol% ZrO2 were discussed. Sintered density was increased with elevating forming pressure in range of 6~300 MPa and about >99.2% of theoretical density was obtained at 1$600^{\circ}C$ for 2h in case of 300 MPa of 6~300 MPa uniaxially cold-pressed compacts containing 20 vol% ZrO2. All kinds of different batch composition exhibited nearly the same shrinkage behaviour with end-point shrinkage between 20 and 24%, and had the maximum shrinkage rate (0.41~0.54%/min) around 140$0^{\circ}C$. Grain growth was occurred faster in $\alpha$-Al2O3 than in {{{{ gamma }}-Al2O3 starting matrix during sintering at 1$600^{\circ}C$. Bimodal pore size distribution of interaglomerate pores with size of 0.03~0.2 ${\mu}{\textrm}{m}$ and of interaglomerate pores with size of around 60 ${\mu}{\textrm}{m}$ was obtained in Ce-TZP/$\alpha$-Al2O3 composite sintered at 130$0^{\circ}C$. But unimodal pore size distribution with around 0.1 ${\mu}{\textrm}{m}$ was observed in Ce-TZP/{{{{ gamma }}-Al2O3 composite sintered at the same temperature. Microcracks were occurred due to the tlongrightarrowm transformation of ZrO2 on cooling process.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.464-465
• /
• 2006

Monodispersed and nano-sized Cu powders were synthesized from copper sulfate pentahydrate $(CuSO_4{\cdot}5H_2O)$ inside a nonionic polymer matrix by using wet chemical reduction process. The sucrose was used as a nonionic polymer network source. The influences of a nonionic polymer matrix on the particle size of the prepared Cu powders were characterized by means of X-ray diffraction), scanning electron microscopy), and particle size analysis). The smallen Cu powders with size of approximately 100 nm was obtained with adding of 0.04M sucrose at reaction temperature of $60\;^{\circ}C$. The particle size of the Cu powders prepared by the reduction inside polymer network was strongly dependent of the sucrose content and reaction temperature.

• Archives of Pharmacal Research
• /
• 제8권3호
• /
• pp.159-168
• /
• 1985

In attempt to develop a drug delivery system using serum albumin microspheres, bovine serum albumin microspheres containing antitumor agent, cytarabine, were prepared. The shape, surface characteristics, size distribution, behavior of in vitro distribution, drug release behaior, and degradation of albumin microspheres in animal liver tissue homogenate and proteolytic enzyme were investigated. The shape of albumin microspheres was spherical and the surface was smooth and compact. The size distribution of the albumin microspheres was affected by dispersion forces during emulsification and albumin concentration. Distribution of albumin mirospheres after intravenous administration in rabbit was achieved immediately. In vitro, albumin microsphere matrix was so hard that it retained most of cytarabine except initial burst during the first 10 minutes, and the level of drug release during the initial burst was affected by heating temperature, drug/albumin concentration ratio and size distribution. After drug release test, the morphology of albumin micropheres was not changed. Albumin microsphere matrix was degraded by the rabbit liver tissue homogenate and proteolytic enzyme. The degree of degradation was affected by heating temperature.

• 한국전자파학회논문지
• /
• 제26권10호
• /
• pp.876-884
• /
• 2015

본 논문에서는 5세대 이동통신을 위한 28 GHz 주파수 대역에서 스위치 빔포밍 안테나 시스템을 설계하였다. 본 빔포밍 시스템은 버틀러 매트릭스를 사용하였으며, 이는 다른 4 방향의 빔 조향을 할 수 있도록 각 출력단에 등간격의 위상을 생성한다. 배열 안테나는 28 GHz 주파수 대역에서 원하는 4개의 방향으로 조향할 수 있도록 설계하였다. 설계한 버틀러 매트릭스는 커플러와 지연선로로 구성되며, 그 동작에 대하여 설명하였다. 본 안테나 시스템은 유전율이 3이고, 5 mil의 높이를 가진 RO3003 기판을 이용하여 설계하였다. 설계한 버틀러 매트릭스의 사이즈는 $20.3{\times}13.0mm^2$이고, 배열 안테나의 사이즈는 $21.2{\times}19.9mm^2$이다. 본 시스템은 $-34^{\circ}{\sim}+33^{\circ}$까지 조향을 할 수 있고, Sidelobe level(SLL)의 최소값은 12.9 dB이다.

• 한국가스학회지
• /
• 제23권3호
• /
• pp.33-39
• /
• 2019

2010년대에 들어서 노후화된 공정으로 인하여 많은 공장들의 안전이 보장되지 않은 채로 가동되고 있다. 공정 및 설비의 노후화 문제를 근본적으로 해결하기는 어렵지만, 사전에 위험성 평가로 위험을 예방할 수있다. 본 연구는 CDU(Crude Distillation Unit)의 탈황 장비에 있는 배관에서 황으로 인한 부식을 타겟으로 지정하였고, API RP 581를 참고한 RBI(Risk Based Inspection)기법으로 위험성 평가를 실시하였다. RBI 기법은 Frequency와 Consequence의 조합으로 Risk를 표현하고, 이들을 바탕으로 Risk Matrix를 만든다. 본 연구는 배관의 Hole Size를 Small과 Medium으로, Frequency의 감도는 'Low'로 선택하여 진행하였다. 기준을 통해 만들어진 Risk Matrix를 참고하여 배관에서 황으로 인한 부식의 사고 위험성을 평가하고 향후 사고 방지 계획을 세울 수 있다. 또한 이와 비슷한 방법으로 노후화에 대한 예방을 한다면 보이지 않는 크고 작은 사고들도 예방 할 수 있다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제16권9호
• /
• pp.2991-3007
• /
• 2022

Two dimensional locality preserving projections (2D-LPP) is an improved algorithm of 2D image to solve the small sample size (SSS) problems which locality preserving projections (LPP) meets. It's able to find the low dimension manifold mapping that not only preserves local information but also detects manifold embedded in original data spaces. However, 2D-LPP is simple and elegant. So, inspired by the comparison experiments between two dimensional linear discriminant analysis (2D-LDA) and linear discriminant analysis (LDA) which indicated that matrix based methods don't always perform better even when training samples are limited, we surmise 2D-LPP may meet the same limitation as 2D-LDA and propose a novel matrix exponential method to enhance the performance of 2D-LPP. 2D-MELPP is equivalent to employing distance diffusion mapping to transform original images into a new space, and margins between labels are broadened, which is beneficial for solving classification problems. Nonetheless, the computational time complexity of 2D-MELPP is extremely high. In this paper, we replace some of matrix multiplications with multiple multiplications to save the memory cost and provide an efficient way for solving 2D-MELPP. We test it on public databases: random 3D data set, ORL, AR face database and Polyu Palmprint database and compare it with other 2D methods like 2D-LDA, 2D-LPP and 1D methods like LPP and exponential locality preserving projections (ELPP), finding it outperforms than others in recognition accuracy. We also compare different dimensions of projection vector and record the cost time on the ORL, AR face database and Polyu Palmprint database. The experiment results above proves that our advanced algorithm has a better performance on 3 independent public databases.

• 한국통신학회논문지
• /
• 제27권2A호
• /
• pp.116-123
• /
• 2002

자켓 행렬(Jacket matrix)은 왈쉬 하다마드(Walsh Hadamard) 행렬 구조를 바탕으로 확장한 행렬이다. 왈쉬 하다마드 행렬이 +1, -1을 기본 원소로 하고 있는 반면 자켓 행렬은 $\pm$1과 $\pm$$\omega$($\pm$j, $\pm$$_2$$^{n}$ )를 각각 원소로 가질 수 있다. 이 행렬은 중앙 부근에 무게(weight)를 갖는데, 하다마드 행렬 크기의 1/4 크기로 부호 부분과 무게 부분으로 구성된다. 본 논문에서는 기존에 행렬 중앙에 강제적으로 무게를 할당하여 자켓 행렬을 구성하였으나, 어떠한 크기의 행렬도 크기와 무게만 정해주면 생성해낼 수 있는 이진 인덱스를 이용한 간단한 비트열 형태의 일반식이 제시된다. 무게는 행과 열의 이진 인덱스의 최상위 두 비트를 Exclusive-OR 연산한 결과가 1인 원소에 부여된다. 또한 분산연산(Distributed Arithmetic:DA) 알고리즘을 이용한 고속자켓변환(Fast Jacket Transform)의 VLSI 구조를 제시한다. 자켓 행렬은 cyclic한 특성을 가지고 있어서 암호화, 정보 이론 및 WCDMA의 복소수 확산 QPSK 변조부에 응용될 수 있다.

• 대한수학회지
• /
• 제42권6호
• /
• pp.1287-1309
• /
• 2005

A key exchange protocol using commutative subalge-bras of a full matrix algebra is considered. The security of the protocol depends on the difficulty of solving matrix equations XRY = T, with given matrices R and T. We give a polynomial time algorithm to solve XRY = T for the choice of certain types of subalgebras. We also compare the efficiency of the protocol with the Diffie-Hellman key exchange protocol on the key computation time and the key size.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.863-869
• /
• 2007

An improved method based on a normal frequency response function (FRF) is proposed to identify structural parameters such as mass, stiffness and damping matrices directly from the FRFs of a linear mechanical system. The method for estimating structural parameters directly from the measured FRFs of a structure is presented. This paper demonstrates that the characteristic matrices are extracted more accurately by using a weighted equation and eliminating the matrix inverse operation. The method is verified for a four degree-of-freedom lumped parameter system and an eight degree-of-freedom finite element beam. Experimental verification is also performed for a free-free steel beam whose size and physical properties are the same as those of the finite element beam. The results show that the structural parameters, especially the damping matrix, can be estimated more accurately by the proposed method.