• Elastomers and Composites
• /
• 제39권1호
• /
• pp.23-35
• /
• 2004

본 연구에서는 먼저 유한요소해석을 통해 주요 물성계수들이 압입시 하중-변위 곡선형상에 미치는 영향을 분석하였다. 또한 유한요소 압입해석을 통해 마찰계수의 영향으로 하중-변위 곡선, 시편하부의 단위부피당 변형에너지 및 변형률 주불변량이 바뀌지 않는 최적 압입깊이와 시편하부지점을 선정하였다. 이러한 관찰을 통해 하나의 요소에서 얻어지는 단위부피당 변형 에너지와 변형률 주불변량을 하중-변위 데이터와 모사 시킬 수 있는 무차원 함수를 얻을 수 있었으며, 이 과정에서 예측된 물성계수를 바탕으로 공칭응력-공칭변형률 곡선을 얻을 수 있었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.121-122
• /
• 2008

Lithium Niobate (LN:LiNbO3) is a compound of niobium, lithium and oxygen. The characteristics of LN are piezoelectricity, ferroelectricity and photoelectricity, and which is widely used in surface acoustic wave (SAW). To manufacture LN device, the LN surface should be a smooth surface and defect-free because of optical property, but the LN material is processed difficult by traditional processes such as grinding and mechanical polishing (MP) because of its brittleness. To decrease defects, chemical mechanical polishing (CMP) was applied to the LN wafer. In this study, the suitable parameters scuh as pressure and relative velocity, were investigated for the LN CMP process. To improve roughness, the LN CMP was performed using the parameters that were the highest removal rate among process parameters. And, evaluation of optical property was performed by the optical reflectance and non-linear characteristic.

• 대한토목학회논문집
• /
• 제28권2D호
• /
• pp.243-248
• /
• 2008

아스팔트 포장에서 발생하는 수분손상은 우수 등에 의한 수분 침투로 아스팔트 혼합물 내의 접착력과 점착력이 손상되면서 발생하는 현상으로서, 아스팔트 포장의 주요 파손에 영향을 미치는 원인의 하나로 알려져 있다. 본 연구에서는 아스팔트 포장에서 발생하는 수분손상을 아스팔트 혼합물의 실내 물성 특성으로 규명하고자, 기존의 간접인장시험과 수정 라트만 시험 방법을 이용하여 국내의 일반 및 SBS 개질 아스팔트 혼합물에 대해 반복 수침 및 다양한 온도 영역에서 아스팔트 혼합물의 물성 변화와 수분 저항성 특성을 평가하였다. 이를 통해 아스팔트 혼합물의 물성(회복탄성계수, 간접인장강도, 파괴에너지, 크리프 변형에너지) 변화가 반복적인 수침에 따른 수분손상과는 높은 상관성을 나타내었으며, 수침 횟수별로 다른 감소 경향을 나타내는 결과를 도출하였다. 그리고 재료 종류별로는 반복 수침에 따른 시험 물성값의 손실률은 모든 온도 영역에서 SBS 개질 아스팔트 혼합물이 일반 아스팔트 혼합물에 비해 낮은 경향을 나타내는 것으로 분석되었다. 결론적으로, 현행 아스팔트 혼합물의 수분손상 특성을 평가하는 방법은 단기적인 수침 조건과 단일 시험 물성에 의해 평가됨으로서 변별력 있는 기준으로 사용하는데 한계가 있는 것으로 판단된다. 이에 아스팔트 혼합물의 장기적인 수분손상 특성 및 변별력 있는 재료 물성의 평가를 위해서는 반복적인 수침 조건과 함께 다양한 물성 기준의 적용이 고려되어야 할 것으로 판단된다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 추계학술대회 논문집
• /
• pp.607-608
• /
• 2008

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2005년도 춘계학술발표대회 및 제8회 신소재 심포지엄 논문개요집
• /
• pp.30-30
• /
• 2005

• 산업경영시스템학회지
• /
• 제37권1호
• /
• pp.157-164
• /
• 2014

The usage of corrugated cardboard for packing material is increasing in these days because it is light and easy to manufacture packing boxes. However, the structure analysis of packing boxes, made of cardboard, is not well carried. The reason can be deduced that its mechanical properties for structure analysis are not well known. The cardboards are made different shapes with various types of raw materials that are paper-based compound. In addition, the cardboards are considered to be orthotropic material. This research finds mechanical properties of triple layered cardboard which is composed of outer liner and inner liner. The moduli of elasticity and of shear for liners are found from tension test and T-Peel test. The mechanical properties of the cardboard are calculated using the super position method and equivalent evaluation method.

• 한국태양에너지학회 논문집
• /
• 제26권4호
• /
• pp.83-91
• /
• 2006

As a demand for sustainable development rises, the preference for earth house (earth construction) increases gradually. However, there are few data for predicting and evaluating the thermal environment and indoor air quality of earth house. Thus, this study aims to measure thermal properties(thermal conductivity, density and specific heat) and pollutants emission intensities(formaldehyde and volatile organic compounds) of current main earth construction materials and make a comparison between earth and cement construction materials. As results, quantitative thermal properties and pollutants emission intensities of current main earth construction materials are shown.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 봄 학술발표회 논문집
• /
• pp.629-634
• /
• 2001

This study is to characterize the material property of early age high performance concrete emphasizing compressive strength using nondestructive testing methods. Three high performance concrete slabs of 600, 850 and 1100kg/$cm^{2}$ compressive strengths were prepared together with cylinders from same batches. Cylinder tests were peformed at the ages of 7, 14, 21 and 28 days after pouring. Using the impact echo method, the compression wave velocities were obtained based on different high performance concrete ages and compressive strengths. The equation to obtain the compressive strengths of high performance concrete has been developed using the obtained compression wave velocities. Using the SASW (spectral analysis of surface wave) method, the equation have also been developed to obtain the compressive strengths of high performance concrete based on the surface wave velocities.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
• /
• pp.265-266
• /
• 2006

It was well known that thermopile was quiet a competent sensor using to probe the temperature of "hot point" where the temperature can be off the temperature-limitation for normal operation of the main electrical power equipment. In the present work, we aimed for developing new Ge-thermopile materials which can be using a non-contact temperature sensors at various hot-point of the power equipment and evaluation of its output property. As a results of the present works, a new thermopile which were composed Ga-poded p-type and Sb-doped n-type in Ge-semiconductor were designed and manufactured by MBE(Molecular Beam Epitaxy) process and showed superior sensitivity at room temperature.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2005년도 전기학술대회논문집
• /
• pp.326-330
• /
• 2005

Aircraft composite structure with honeycomb core experiences core crush problem in manufacturing. To prevent core crush additional processes are needed such as core stabilization and prepreg material tie-down and this is the cause of increasing cost. Recent study shows that high friction prepreg prevent core crush without additional process. This paper presents the analysis of high frictional material which attracts lots of interests through physical property, mechanical property and microscopic