• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.66 no.2
• /
• pp.120-129
• /
• 2021

Securing a range of wheat resources is of particular importance with respect to wheat breeding, as it provides a broad genetic foundation. Although wheat breeders have used different wheat germplasms as material resources in current breeding systems, the traits of most germplasms collected from foreign countries differ from the unique traits that have evolved in the Korean environment. In this study, conducted over a 2-year period (2018 and 2019), we therefore evaluated the agricultural traits 1,967 wheat germplasms collected not only in Korea but also worldwide. During the period from sowing to February, the average temperature in 2019 was greater than 1℃, whereas from March to June, the average temperature was approximately 0.9℃ higher in 2018. Compared with the growth recorded in 2018, the stem length in 2019 increased by approximately 20 cm in 2019, and there were notable differences heading date and maturation between 2018 and 2019. In 2019, the heading dates of 973 and 713 wheat resources were earlier and later than those in 2018, respectively. Moreover, stem length was found to be highly correlated with the heading date and maturation. In Korea, where the rainy season and tine of rice transplantation overlap with the time of wheat harvest, early flowering time with high grain yield has been the most important selection target with respect to wheat breeding. We anticipate that the findings of this study will provide would use a foundation for the selection of elite materials and the development of resource core-sets for Korean wheat breeding programs.

• Radiation Oncology Journal
• /
• v.14 no.1
• /
• pp.69-76
• /
• 1996

Purpose : The aim of this study is to investigate the random and systematic errors and tumor movement using electronic portal imaging device in lung cancer patients for the adequate margin in the treatment planning of 3-dimensional conformal therapy. Material and Methods : The electronic portal imaging device is matrix ion chamber type(Portal Vision, Varian). Ten patients of lung cancer treated with chest irradiation were selected for this study. Patients were treated in the supine position without immobilization device. All treatments were delivered by an 10 MV linear accelerator that had the portal imaging system mounted to its ganrty. AP or PA field Portal images were only analyzed. Radiation therapy field included the tumor, mediastinum and supraclavicular lymph nodes. A total of 103 portal images were analyzed for set-up deviation and 10 multiple images were analyzed for tumor movement because of respiration and cardiac motion. Result : The average values of setup displacements in the x, y direction was 1.41 mm, 1 78 mm, respectively. The standard deviation of systematic component was 4.63 mm, 4.11 mm along the x, y axis, respectively while the random component was 4.17 mm in the x direction and 3.31 mm in the y direction. The average displacement from respiratory movement was 12.2 mm with a standard deviation of 4.03 mm. Conclusion : The overall set-up displacement includes both random and systematic component and respiratory movement. About 10 mm, 25 mm margins along x, y axis which considered the set-up displacement and tumor movement were required for initial 3-dimensional conformal treatment planning in the lung cancer patients and portal images should be made and analyzed during first week of treatment, individually.

• Journal of the Korean Vacuum Society
• /
• v.21 no.3
• /
• pp.142-150
• /
• 2012

In this Study, Mo back electrode were deposited as the functions of various working pressure, deposition time and plasma per-treatment on sodalime glass (SLG) for application to CIGS thin film solar cell using by DC sputtering method, and were analyzed Mo change to $MoSe_2$ layer through selenization processes. And finally Mo back electrode characteristics were evaluated as application to CIGS device after Al/AZO/ZnO/CdS/CIGS/Mo/SLG fabrication. Mo films fabricated as a function of the working pressure from 1.3 to 4.9mTorr are that physical thickness changed to increase from 1.24 to 1.27 ${\mu}m$ and electrical characteristics of sheet resistance changed to increase from 0.195 to 0.242 ${\Omega}/sq$ as according to the higher working pressure. We could find out that Mo film have more dense in lower working pressure because positive Ar ions have higher energy in lower pressure when ions impact to Mo target, and have dominated (100) columnar structure without working pressure. Also Mo films fabricated as a function of the deposition time are that physical thickness changed to increase from 0.15 to 1.24 ${\mu}m$ and electrical characteristics of sheet resistance changed to decrease from 2.75 to 0.195 ${\Omega}/sq$ as according to the increasing of deposition time. This is reasonable because more thick metal film have better electrical characteristics. We investigated Mo change to $MoSe_2$ layer through selenization processes after Se/Mo/SLG fabrication as a function of the selenization time from 5 to 40 minutes. $MoSe_2$ thickness were changed to increase as according to the increasing of selenization time. We could find out that we have to control $MoSe_2$ thickness to get ohmic contact characteristics as controlling of proper selenization time. And we fabricated and evaluated CIGS thin film solar cell device as Al/AZO/ZnO/CdS/CIGS/Mo/SLG structures depend on Mo thickness 1.2 ${\mu}m$ and 0.6 ${\mu}m$. The efficiency of CIGS device with 0.6 ${\mu}m$ Mo thickness is batter as 9.46% because Na ion of SLG can move to CIGS layer more faster through thin Mo layer. The adhesion characteristics of Mo back electrode on SLG were improved better as plasma pre-treatment on SLG substrate before Mo deposition. And we could expect better efficiency of CIGS thin film solar cell as controlling of Mo thickness and $MoSe_2$ thickness depend on Na effect and selenization time.

• The korean journal of orthodontics
• /
• v.31 no.4 s.87
• /
• pp.467-477
• /
• 2001

This investigation was designed to determine the effects of wire size, bracket width and the number of bracket on bracket-wire dynamic frictional resistance during simulating arch wire-guided tooth movement in vitro. For simulation of an arch wire-guided tooth movement, we simulated tooth, periodontal ligament and cancellous bone. Maxillary premolar and 1st molar were simulated as real sized resin teeth, the simulated resin teeth which its root was coated by polyether impression material which its elastic modulus is similar to periodontal ligament were embedded in steel housing with inlay wax which its elastic modulus is similar to cancellous bone. Stainless steel wires in four wire size (0.016, 0.018, $0.016\;{\times}\;0.022,\;0.019\;{\times}\;0.025$ inch) were examined with respect to three (stainless steel) bracket widths (2.4, 3.0, 4.3mm) and the number of medium bracket(one, two, three) included in the experimental assembly under dry condition. The wires were ligated into the brackets with elastomeric module. The results were as follows : 1. In all the brackets, frictional resistance increased with increase in wire size. But, statistically similar levels of frictional resistance were observed between 0.018 inch and $0.016\;{\times}\;0.022$ inch wires in narrow bracket and also between 0.016 inch and 0.018 inch wire in wide backet. 2. The frictional forces produced by 0.016 inch wire were statistically similar levels in all the brackets. In 0.018 inch round wire, wide bracket was associated with lower amounts of friction than both narrow and medium brackets. In $0.016\;{\times}\;0.022,\;0.019\;{\times}\;0.025$ inch rectangular wire, wide bracket produced target friction than both narrow and medium brackets. In all the wirer, narrow and medium bracket demonstrated no statistical difference in levels of frictional resistance. 3. Frictional resistance increased with increase In number of medium bracket. 0.016 inch round wire demonstrated the greatest increment in frictional resistance, followed by $0.019\;{\times}\;0.025,\;0.016\;{\times}\;0.022$ inch rectangular wire which were similar level in increment of frictional resistance, 0.018 inch wire demonstrated the least increment. The increments of frictional resistance were not constantly direct proportion to number of bracket.

• Asian Journal of Turfgrass Science
• /
• v.23 no.1
• /
• pp.151-162
• /
• 2009

When viewing that since the 1990s local governments have tried to build golf courses as a plan to revitalize the attraction of home and abroad tourists and to increase their tax incomes and that big companies are interested in leisure business including golf courses as a future promising business in the 21st century, golf courses seem to continuously increase in the future. On the contrary, noticing that golf courses are not only the main culprit behind the damage of natural environment and environmental pollution but also a target of real estate speculation and that golf makes a sense of incongruity between the classes of a society as a luxury sports, environment activists and local residents raise criticism to golf. Golf in our country shows a special sports phenomenon of which the pros and cons appear continuously. So, it is judged that policy for golf development direction should be set up based on verified scientific data. Thus, the research aims at deriving the location types of golf courses by looking at laws from the period of formation of the initial domestic golf courses to the recent period, grasping their distribution status according to time series and regions, conducting a questionnaire survey regarding location factors for golfers and the workers of golf courses, and dividing golf courses into several types. It is expected that the research will be a fundamental material when a golf course is built later on, contributing to the research of golf courses.

• Ecology and Resilient Infrastructure
• /
• v.7 no.3
• /
• pp.208-217
• /
• 2020

A biopolymer based on microorganism-derived β-glucan and xanthan gum is being studied as a new eco-friendly material that stabilizes the riverbank slope, and also promotes vegetation growth. However, it is still inconclusive whether biopolymers have a positive effect on plant performance in the riverbanks which are subjected to various climatic factors and plant competitions. For a practical ecological evaluation of the biopolymers, their effect on plant growth promotion was studied in a natural environment. Considering the relationship between competition and plant community formation, the effects of biopolymers on competition were also investigated. For four plant species (Echinochloa crus-galli, Pennisetum alopecuroides, Leonurus japonicus, and Coreopsis lanceolata), the biopolymer effects under intra/interspecific competition were tested at the riverbank (20 m × 10 m) near Samjigyo Bridge in Damyang-gun, Jeollanam-do. A biopolymer powder was mixed with water and commercial soil following the manufacturer's recommendations. The soil mixed with the biopolymer was filled in a pot or applied to the surface of the commercial soil with a thickness of 3 cm. Across the competition treatments, the biopolymer treatment promoted root growth of the target plant species and decreased the specific leaf area. The total biomass and shoot dry weight of P. alopecuroides increased in response to the biopolymer treatment. The competition treatment decreased the total biomass and shoot dry weight compared to the case without competition. Notably, such a competitive effect was similar in all the biopolymer treatments. Thus, biopolymers, when mixed with soil, promote the growth of some plant species, but do not appear to affect the competitive ability of plants.

• Korean Journal of Food Science and Technology
• /
• v.39 no.4
• /
• pp.470-475
• /
• 2007

Oplopanax elatus (O. elatus) is a tall deciduous shrub that has traditionally been used for σ eating a variety of ailments such as diabetes, coughling, rheumatism, gastro-intestinal disorders, and wounds. In order to examine the safety of the ethanol extracts of O. elatus, we performed a 14-day repeated-dose toxicity study with Sprague-Dawley rats. The rats were treated with daily doses of the D. elatus ethanol extracts by gavage at 0, 500, 1000, and 2000 mg/kg/day for 14 consecutive days. We recorded clinical signs of toxicity, body weight, hematology, organ weights, gross and histological changes in target organs, and clinical chemistry analysis data for all rats. There were no significant changes in body and organ weights during the experimental period. The hematological analysis and clinical blood chemistry data revealed no toxic effects from the O. elatus ethanol extracts. Pathologically, neither gross abnormalities nor histopathological changes were observed between the control and treated rats of both sexes. Collectively, these data suggest that the ethanol extracts of O. elatus have a high margin of safety.

• Journal of Chest Surgery
• /
• v.38 no.9 s.254
• /
• pp.601-608
• /
• 2005

Background: To maximize the histological advantage and minimize the physiological disadvantage, we have been using the skeletonized gastroepiploic artey (GEA) as a free graft for total arterial revascularization. The aims of the current study was to assess the efficacy of the skeletonized GEA as a composite or extended graft for total arterial revascularization. Material and Method: Between January 2000 and Feburary 2005, 133 patients (43 female, mean age=61.8 yrs) undergoing coronary artery bypass grafting (CABG) with a skeletonized GEA as free graft (22 extended, 107 composite and 4 others) were enrolled in this study. Coronary angiograms were performed in the immediate (median 44 days, n=86), early (median 366 days, n=56) and midterm (median 984 days, n=29) postoperative periods. Result: There were 3 ($2.2\%$) early and 4 ($3.3\%$) late cardiac-related deaths. The mean number of distal anastomoses per patient was 3.34 for total graft and 1.92 for GEA graft. The immediate, early, and midterm GEA patency were 157/159 ($98.7\%$), 106/142 ($94.6\%$), and 53/56 ($94.6\%$), respectively. During follow-up, four patients required percutaneous intracoronary intervention because of GEA and target coronary artery stenosis or competitive flow. Conclusion: These data demonstrate satisfactory clinical and angiographic results in the skeletonized GEA as free graft for total arterial revascularizatioh. Although we need a careful longer follow-up, the skeletonized GEA as a free graft will be a valuable option 'to be' for CABG.

• Cartoon and Animation Studies
• /
• s.28
• /
• pp.209-233
• /
• 2012

The animation cluster in Korea has begun as a part of the local cultural cluster in the late 1990s with components of companies, local governments, educational institutions, and human resources, which were necessary to run the cluster. And, the animation cluster was initiated for the purpose of encouraging regional economies, but the basic unit was the local on a small scale. Because of this inherent weakness in the local cluster, it was needed to add some additional strategies that could expand the local animation industry into the formal leading industry. That is why the development policy was set up, and the local promotion agency based on this policy was established. It has been several years to manage the local promotion agency, and it is reported that there have been some visible effects. But, it is found out that analyzing the outcome of small unit cluster on the basis of existing criteria on a large scale is not reliable, which means it is not possible to evaluate the outcome of local cluster in a material way. Some examples of problems are as follows. First, the local cluster was made not autonomously but deliberately. Second, the animation cluster of each province has the same market as its target. Therefore, this research - on the basis of the diamond model - focuses on analyzing the existence and role of local promotion agencies rather than evaluating the outcome itself. Through the cases of two provincial cities, Chuncheon and Bucheon, this research examines if it is possible to evaluate the outcome of local clusters managed by promotion agencies.

• Journal of Family Resource Management and Policy Review
• /
• v.27 no.2
• /
• pp.19-33
• /
• 2023

The purpose of this study is to explore the family diversity-related service experiences of Family Center practitioners under the main policy goal of recognizing family diversity set out in the Fourth Master Plan for Healthy Families. To this end, a focus group interview was conducted with 12 Family Center practitioners in multiple cities and districts who had extensive family service experiences. The focus group interview data were analyzed using thematic analysis. The analysis found that Family Center practitioners understood the concept of family diversity according to the changes in the family policy environment and applied it in various forms to the administration of their respective centers. However, while administering the family support services considering the aspect of family diversity, they experienced a lack of resources for various family service programs, conflicts between each family service goal and the family diversity-related program goal, and difficulties in identifying the recipients. To expand family diversity-related services in the future, the interviewees emphasized the need for education programs about family diversity targeted at Family Center practitioners, and family support services that reflect regional characteristics. They also stressed the need for changes in program operation methods, such as expanding family diversity education, and developing family service programs appropriate for diverse families. Lastly, they highlighted the need for mounting a publicity campaign for Family Centers, widening the target recipients of family programs, and expanding the budget for the administration of the family diversity project. The results of this study can serve as a basis for restructuring family services for the application and expansion of family diversity practices, and as educational material that can be used to strengthen the capacity of family service practitioners to plan and execute family support programs that take family diversity into consideration.