• Korean Institute of Interior Design Journal
• /
• v.20 no.3
• /
• pp.110-118
• /
• 2011

Today aesthetics expression could be a 'Everyday-life Beauty', because today art & design are closely related with a contemporary life. This thesis dealt with a everyday-life and sensitive design which sublimate from everyday-life material to the concept of aesthetics, such a purpose of this thesis establishes a base of everyday-life design through everyday-life aesthetics. This purpose made to pay attention to Japan's aesthetics concept, because Japan has been maintained and developed its own everyday-life aesthetics. Even if Japan doesn't have only everyday-life aesthetics, it is useful that is studies as some kind of a prototype. So this study analyzed about a everyday-life aesthetics and the expression method through the case-study of Japan. According to Yonagi Muneyoshi and Leonard Koren, the Wabi-Sabi has three conceptual characteristics like impermanent, incomplete, and imperfect and six expression characteristics like implication, tranquility, simplicity, coarseness, purity, and association. This study process is as follows. In the first a vocabulary of interior design was derived from three conceptual characteristics and six expression characteristics, and spatial facts was abstracted from it, and then volume, form, and then shape of composition facts of interior space was extracted from it. Finally the expression characteristics of the Wabi-Sabi in interior design was derived from these processes. In conclusion, the expression characteristics of the Wabi-Sabi in interior design is the transitional space through a Shadow, the conversional space through form and material composition, and the copying space through a natural friendship.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.9
• /
• pp.1062-1069
• /
• 2011

In electro-galvanizing line to manufacture the electro-galvanized steel sheet, polishing system is required to maintain clean surface of conductor roll and to secure the quality of the steel sheet. At the same time, prediction and decision of the replacement cycle for felt material and its brush installed in the polishing system is also important because the brush is directly contacted on the conductor roll surface. In this study, the polishing system has been designed which the brush is repetitive translating according to the longitudinal direction of the conductor roll. Furthermore, the prediction on the wear-life of the felt material used for the brush is performed using the contact pressure extracted by finite element analysis. And to verify the predicted wear-life of the felt material, the experimental study is also carried out. From the comparison result between the predicted and the measured wear-life of the felt material, it is presented that the wear-life and the replacement cycle of the felt material are well predicted by considering a wear compensation factor, and the wear compensation factor is useful and reasonable.

• Plant Biotechnology Reports
• /
• v.4 no.3
• /
• pp.223-228
• /
• 2010

Schizonepeta tenuifolia (Korean name "Hyung- Gae") is an oriental medicinal plant that is widely used in Korea, China and Japan. S. tenuifolia (Hyung-Gae) has many pharmacological activities and is mostly used for many medicinal preparations. The dried aerial part (spikes and stems) of three oriental medicinal plants, S. tenuifolia (Hyung-Gae), Agastache rugosa (Kwhak-Hyang) and Elsholtzia ciliata (Hyang-Yoo) belonging to the same family, mint family Labiaceae, have such similar shape and smell that it is difficult to differentiate between them. The trnL-F regions of chloroplast DNA of the three medicinal plants were sequenced and used as targets in multiplex PCR reaction to identify S. tenuifolia. After alignment of trnL-F sequences of the authenticated plant samples, one single nucleotide polymorphism (SNP) specific to S. tenuifolia was found. Based on this SNP, a new primer was designed that specifically amplifies the trnL-F region of S. tenuifolia. The established multiplex-PCR was proven to be effective in the differentiation of commercial S. tenuifolia samples from A. rugosa and E. ciliata. This rapid and accurate molecular method is highly promising for use in the food industry.

• Journal of Applied Biological Chemistry
• /
• v.49 no.3
• /
• pp.101-105
• /
• 2006

Degradation of the herbicide butachlor was investigated using laboratory-synthesized zerovalent iron ($Fe^0$). The synthesized zerovalent iron was determined to be nanoscale powder by scanning electron microscopic analysis. To investigate degradation of butachlor using the synthesized nanoscale zerovalent iron, time-course batch experiments were conducted by treating the solution of butachlor formulation with the iron. More than 90% degradation of butachlor was observed by iron treatment within 24 h. The synthesized nanoscale zerovalent iron showed an increase in particle aggregation in the batch tests. Green rust formation and a pH drop in solutions were observed, suggesting that the oxidation of the iron occurred. When the iron was extracted with dichloromethane, a negligible concentration was found in the extract, suggesting that butachlor did not bind to the iron particles. GC/MS analysis detected the dechlorinated product as a major degradation product of butachlor in the solutions. The data indicate that laboratory-synthesized zerovalent iron functioned as a reductant to remove electron-withdrawing chlorine, giving the dechlorinated product.

• Journal of Applied Reliability
• /
• v.17 no.2
• /
• pp.103-111
• /
• 2017

Purpose: Accelerated degradation tests can speed time to market and reduce the test time and costs associated with long term reliability tests to verify the required service life of a product or material. This paper proposes a service life prediction method for components or materials using an accelerated degradation tests based on the relationships between temperature and the rate of failure-causing chemical reaction. Methods: The relationship between performance degradation and the rate of a failure-causing chemical reaction is assumed and least square estimation is used to estimate model parameters from the degradation model. Results: Methods of obtaining acceleration factors and predicting service life using the degradation model are presented and a numerical example is provided. Conclusion: Service life prediction of a component or material is possible at an early stage of the degradation test by using the proposed method.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1997.11a
• /
• pp.360-363
• /
• 1997

The method of estimating life time of epoxy composites which be widely used for transformers has been studied in this paper. The breakdown properties of specimens are observed by appling high AC voltage at the room temperature from a series of the experiments. Afterwards, the breakdown time was determined under the constant voltage below the lowest breakdown voltage. Also, V-t properties were found out using weibull distribution widely used in the applications of discrete data for estimating life time of epoxy composites and life exponent n was gained properly. when life exponent is gained is found out, the tong breakdown life time at used voltage can be estimated from breakdown experiments in short time using reverse law of n power.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.7
• /
• pp.607-611
• /
• 2000

The characteristics on the interface between Epoxy and EPDM which are materials of the underground insulation systems of power delivery have studied. The breakdown strength of specimens are observed by applying high AC voltage at the room temperature. The breakdown times under the constant voltage below the breakdown voltage were gained. As constant voltage is applied the breakdown time is proportion to the breakdown strength. The life exponent n is gained by inverse power law and the long breakdown life time can be evaluated. AC breakdown strength and life time is improved by oiling to the interface. When the low viscosity oil is spread interface has the highest life time.

• Proceedings of the KAIS Fall Conference
• /
• 2004.06a
• /
• pp.335-338
• /
• 2004

Life-Cycle Engineering(LCE) is a decision-making methodology that considers environmental and cost needs during the product life-cycle. Environmental conscious design and manufacturing has become more and more important and it has been enforced by governmental regulations and used as trade restriction. LCE involves integrating environmental consideration into new product development including design, material selection, manufacturing processes and distribution of the product to the consumers, plus the end-of-life management such as disassembly, material recovery, remanufacturing of the product after discarding it. In this paper, a state-of-the-art survey of LCE is presented.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.18 no.3
• /
• pp.368-386
• /
• 1994

The primary purpose of this study was to identify the diversity and embellishment of American Indian clothing and relationship between culture and clothing in American Indian Culture Areas. After the introduction of European material culture, change in American Indian clothing was conducted. The result of the Study as follows: 1. The most influential factors affecting the diversity of American Indian clothing were environmental factors. Climates and geographical features, Raw material were reflected in clothing style and clothing material in each culture Area. 2. Economic situation and life style were shown to be influential to clothing development. The best known instance of this was greatly elaborated clothing and personal adornment of the Plains who had higher stand of life and nomadic life style. 3. Religious concepts were important factors influencing American Indian clothing. Indian tribes had different ritual performance they used particular motifs in clothing. Clothing, such as "ghost shirt", Apache medicine shirt and Pueblo ceremonial clothing, served hidden pur- poses. 4. Techenology was another factor identified in this study as influencing American Indian clothing. Especially, weaving skills of Southwest played a great role in textile development. Pueblo "manta" and Navaho "bil" were famous for Indian costume. 5. European material culture allowed great change of traditional native Indian clothing. American Indian had new material, new styles, new concept of clothing. 6. American Indian, although Indian applicated European trade goods, was actually quite conservative in retaining traditional designs and modes of decoration. Asthetics and traction of American Indian were reflected in American Indian clothing.d in American Indian clothing.

• Journal of the Korean Wood Science and Technology
• /
• v.42 no.4
• /
• pp.367-375
• /
• 2014

A simplified material model, which was efficiently implemented in a three-dimensional finite solid element (3D FE) analysis for wood was developed. The bi-linear elasto-plastic anisotropic material theory was adopted to describe constitutive relations of wood in three major directions including longitudinal, radial and tangential direction. The assumption of transverse isotropy was made to reduce the requisite 27 material constants to 6 independent constants including elastic moduli, yield stresses and Poisson's ratios in the parallel, and perpendicular to grain directions. The results of Douglas fir compression tests in the three directions were compared to the 3D FE simulation incorporated with the wood material model developed in this study. Successful agreements of the results were found in the load-deformation curves and the permanent deformations. Future works and difficulties expected in the advanced application of the model were discussed.