• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.5
• /
• pp.533-540
• /
• 2013

Prime movers in engine rooms inherently are much affected by the adjustment of their governors for the steady state and transient properties, consequently requiring that marine engineers shall be well familiar with the way to manage governor dials for normal operation. The hydro-mechanical governors basically have different control characteristics and adjustment parameters of stability from digital governors. The former include compensation mechanism using dash pot while the control algorithm of the latter is usually based on the PID action. This study is for configuring a simulation module to let trainees practice how to adjust dials for stability on hydraulic governors in the view that the practice by real governors and engines is time consuming and high cost for operation. The governor module includes the adjusting points such as speed set, speed droop, needle valve and compensation pointer with engine module of $2^{nd}$ order coupled. The results of simulation showed satisfactory responses as a training tool for the adjustment of control parameters.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.29 no.7
• /
• pp.360-365
• /
• 2017

Recently, development efforts of triple-effect absorption chiller have been increased in order to improve the efficiency of double-effect absorption chiller. However, triple-effect absorption chiller has some disadvantages, including high corrosion characteristic of LiBr solution at high temperature of $200^{\circ}C$. Moreover, it is necessary to develop new components for operation under high pressure of 2 bars even though COP is increased to 1.6 or 1.7. The objective of this study was to introduce a new system by combining double effect absorption chiller with single effect absorption chiller with multi-generators using bypass flow of LiBr dilute solution to $3^{rd}$ generator to overcome the disadvantages of triple-effect chiller and improve energy efficiency. Results indicate that the new absorption cycle had a much higher efficiency than double-effect chiller system, showing significant improvement when bypass solution flow rate of 25% was applied to the $3^{rd}$ generator using the main dilute solution of the absorber. The COP of the new chiller system was found to be 1.438, which was 21.7% higher than that (1.18) of the present double-effect system. The COP was decreased when solution by-pass rate to the $3^{rd}$ generator was increased. In addition, lower cooling water temperature caused higher COP. Therefore, the multi-generator system with by-pass solution might be an excellent chiller alternative to triple-effect absorption chiller with higher efficiency.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.7 no.2
• /
• pp.270-287
• /
• 2015

According to the increase of the operating cost and material cost of a ship due to the change of international oil price, a demand for the lightening of the ship weight is being made from various parties such as shipping companies, ship owners, and shipyards. To satisfy such demand, many studies for a light ship are being made. As one of them, an optimal design method of an existing hull structure, that is, a method for lightening the ship weight based on the optimization technique was proposed in this study. For this, we selected a hatch cover of a bulk carrier as an optimization target and formulated an optimization problem in order to determine optimal principal dimensions of the hatch cover for lightening the bulk carrier. Some dimensions representing the shape of the hatch cover were selected as design variables and some design considerations related to the maximum stress, maximum deflection, and geometry of the hatch cover were selected as constraints. In addition, the minimization of the weight of the hatch cover was selected as an objective function. To solve this optimization problem, we developed an optimization program based on the Sequential Quadratic Programming (SQP) using C++ programming language. To evaluate the applicability of the developed program, it was applied to a problem for finding optimal principal dimensions of the hatch cover of a deadweight 180,000 ton bulk carrier. The result shows that the developed program can decrease the hatch cover's weight by about 8.5%. Thus, this study will be able to contribute to make energy saving and environment-friendly ship in shipyard.

• Journal of the Society of Naval Architects of Korea
• /
• v.51 no.1
• /
• pp.16-25
• /
• 2014

To develop a sailing yacht successfully, systematic engineering information is required including technologies from various companies and know-how about sailing yacht. The engineering information about sailing yacht has a complex and extensive structure. Therefore, a robust and high-level of management system is needed to manage the information. In this paper, we design and propose Generic-YWBS (Generic-Yacht Work Breakdown Structure), a work breakdown structure for sailing yachts. The Generic-YWBS is aimed at constructing sailing yachts and contains contents about product- and process-oriented information of sailing yachts. In addition, the Generic-YWBS plays an important role in managing the engineering information as a basic schema of database and system architecture. The Generic-YWBS is derived from fundamental WBS design processes and various rules about sailing yachts, for example, ISAF (International Sailing Federation) equipment rule and IRC rating rule, and a generic structure concept is applied for flexibility. The Generic-YWBS is applicable for various purposes. We designed a detailed code system in order to apply the Generic-YWBS to contents management system. The series of activities are realized through a web-based RIA(Rich Internet Application) program. This program manages the YWBS structure in an XML schema, and the Generic-YWBS management application offers a customizing function to be adapted in the field.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.39 no.1
• /
• pp.48-59
• /
• 2002

TSK(Takagi-Sugeno-Kang) fuzzy models with linear equations consequents, which represent complex nonlinear systems very well with a few rules, can be easily identified systematically by using input-output data. Many algorithms designing TSK fuzzy controllers based on TSK fuzzy models, which guarantees the stability of the closed system, have been suggested. On the contrary, singleton fuzzy models with singleton consequents can be easily understood and adjusted. In this paper, in order to utilize the merits of TSK fuzzy systems and singleton fuzzy systems, an algorithm transforming a TSK fuzzy model into a singleton fuzzy model having the same input-output relation is suggested. The suggested algorithm is applied to a fuzzy modelling example and a fuzzy controller design example.

• Journal of Korea Port Economic Association
• /
• v.28 no.3
• /
• pp.91-110
• /
• 2012

In the modern management literature, knowledge has been recognized as a new strategic resource enabling a firm to create its competitiveness. Shipping companies under fierce competitive structure need to pay attentions to the utility of knowledge management. A shipping firm may develop its unique service capability by classifying, sharing, and transferring the data, information and knowledge obtained from both inside and outside its global service network. The current study attempts to analyze influential relationships between liner shipping firms' knowledge management and service capabilities. In order to achieve this goal, this study designed a knowledge chain model measuring shipping companies' knowledge management levels and tested its validity and reliability based on a total of 80 replied questionnaires from national and foreign liners. The empirical result presents that supportive and primary activities composing a knowledge chain could exert significant positive influences on the enforcement of shipping service capabilities. This research shows that the utility of knowledge management is adoptable in the maritime industry, and recommends that shipping firms should recognize strategic importance of knowledge and actively pursue knowledge management at an entire firm level.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.12 no.1 s.24
• /
• pp.33-38
• /
• 2006

In marine salvage, extreme tide heights and tidal currents are necessary to anchor an accidental ship. In order to meet this requirement, a simple scheme was developed which yields the spatial informations on the extreme tide from the distribution of approximate highest astronomical tide heights using a relationship between extreme and highest astronomical tides at the standard port. This method is the inference method based on horizontally homogeneity of tide. This scheme was applied to estimate extreme tide heights and tidal currents in the Namhae (southern sea of Korea). The highest astronomical tide heights are computed by amplitude of four major constituents (M2, S2, K1, O1 tide). The estimated extreme tide heights are ranged from 70 to 260 cm for return period 50 years and from 80 to 270cm for return period 100 years, respectively. For return period 100 years, extreme tidal currents show value of 1.55 times as strong as those of normal state.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.20 no.2
• /
• pp.228-233
• /
• 2014

In this paper, the motion performance in waves for the training ship Kaya of Pukyong National University is obtained by using a computer program based on Strip method. To guarantee the pleasant seafaring in ocean, the vertical acceleration of ship motion is calculated according to the location of the ship. The results of calculation by changes of ship speed are compared with the guideline of MSI(Motion Sickness Incidence). The degree of motion sickness is shown and discussed through the comparison between calculated vertical acceleration spectrum and MSI guideline. The computational results of MSI were as follow; when ship speed increased in the order of 5 knots, 10 knots, 12 knots and encounter angle became the bow quartering sea of $120^{\circ}$ compared to $180^{\circ}$ and $150^{\circ}$, the vertical acceleration values grew higher.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.17 no.3
• /
• pp.275-281
• /
• 2011

One of the major technology issues in the ship production processes is the curved hull forming process that is a bottle neck and performed by experienced workers. In order to automate the curved hull forming process, there are a lot of attempts to develop the automation system by many shipbuilding companies and academic labs. However they have some problems which put the developed system in the difficulties to be used and maintained in the yard. In this paper, the problems are formed and solved by using tailored Systems Engineering Process which consists of four steps, those are requirement definition, system design, implementation of subsystem and components, and system integration and verification. A prototype for the proposed system development methodology is implemented. From the consideration of the prototype implemented, it is verified that this methodology can be an alternative to solve the problems.

• Journal of Fisheries and Marine Sciences Education
• /
• v.18 no.3
• /
• pp.236-243
• /
• 2006

A series of surveys are performed to evaluate the abundance, composition and distribution of marine debris on the sea bed around the Busan port. In order to set up a master plan for the marine environmental pollution the relevant maritime authority must understand how many and w㏊t kinds of marine litters are distributed on the sea bed. At first we planed to survey areas divided regularly according to the coast line but there were many sea going vessels and fishing boats. So we selected and surveyed the around area where there were no sea going vessels or fishing boats.The obtained results are as follows: 1. The mean values of litters in number and weight are 5.8 pieces/㏊. and 3.5㎏/㏊. respectively. 2. The highest density in terms of number are vinyl and plastic item, and in weight are fishing gear and ship articles. 3. The nearer to the shore we surveyed the more we collected in terms of the density of marine litters in number and in weight per hectare. 4. Eel pot, oiled waste, rope, others, other pot and net of fishing gear litters in number were 59.9, 22.7, 7.9, 4.5, 3.1 and 1.9% respectively. 5. There is no relationship between the amount of fish caught and the amount of marine debris.