References
- Arora, J.S., 2012. Introduction to optimum design. 3rd Edition. Waltham: Elsevier Inc.
- Davis, L., 1991. Handbook of genetic algorithms. New York: Van Nostrand-Reinhold.
- Germanischer Lloyd, 2014. Rules for classification and construction, Rules I. Ship Technology, Part 1. Seagoing Ships, Chapter 1. Hull Structures, Section 17. Cargo Hatchways. Hamburg: Germanischer Lloyd.
- Goldberg, D.E., 1989. Genetic algorithms in search, optimization, and machine learning. Boston: Addison-Wesley.
- Ha, J.H., 2011. A study on the design of reducing weight for the dry cargo ship's hatch cover. M.Sc. Thesis, Pusan National University.
- Han, S.H., Park, B.T., Oh, H.T. and Shin, H.I., 2002. The verification of improvements by structural analysis on hatch cover of a large containership. Proceedings of the Annual Spring Meeting, The Society of Naval Architects of Korea, Pusan, Korea, 18-19 April 2002.
- IACS, 2012. Common structural rules for bulk carriers. London: IACS.
- Jang, C.D and Na, S.S., 1996a. Minimum weight design of transverse frames of oil tankers by generalized slope deflection method. Transactions of the Society of Naval Architects of Korea, 33(3), pp.103-111.
- Jang, C.D and Na, S.S., 1996b. Minimum weight design of oil tankers considering tank arrangement. Transactions of the Society of Naval Architects of Korea, 33(4), pp.97-105.
- Jang, C.D. and Na, S.S., 2000. Development of optimum structural design system for double hull oil tankers. Transactions of the Society of Naval Architects of Korea, 37(1), pp.119-126.
- Journee, J.M.J. and Meijers, J.H.C., 1980. Ship routing for optimum performance. Transaction IME, Report 0529-P. Delft: Delft University of Technology.
- Jung, S.H., 2008. Minimum weight design of transverse member of bulk carrier based on finite element analysis. M.Sc. Thesis, Mokpo National University.
- Lee, D.J., Kim, G.G. and Shin, S.B., 2010. Behavior of global bending distortion of hatch-cover in container carrier during fabrication process. Transactions of the Korean Welding and Joining Society, 28(4), pp.41-48.
- Lee, K.Y., Cho, S.H. and Roh, M.I., 2002. An efficient global-local hybrid optimization method using design sensitivity analysis. International Journal of Vehicle Design, 28(4), pp.300-317. https://doi.org/10.1504/IJVD.2002.001992
- Lim, S.J., 2009. A study on the optimum structural design considering structural safety and productivity. M.Sc. Thesis. University of Ulsan.
- Moe, J., 1969. Optimum design of statically indeterminate frames by means of nonlinear programming, Reports 23, 24. USA: University of Michigan.
- Moe, J. and Lund, S., 1968. Cost and weight minimization of structures with special emphasis on longitudinal strength members of tankers. Transactions of Royal Institute of Naval Architects, 110(1), pp. 43-70.
- Na, S.S., Min, K.S., Um, H.S. and Shin, D.H., 1985. Minimum weight design of transverse strength member by using finite element method. Transactions of the Society of Naval Architects of Korea, 22(3), pp.119-126.
- Oujebbour, F.Z., Habbal, A., Ellaia, R. and Zhao, Z., 2014. Multicriteria shape design of a sheet contour in stamping. Journal of Computational Design and Engineering, 1(3), pp.187-193. https://doi.org/10.7315/JCDE.2014.018
- Porsani, M.J., Stoffa, P.L., Sen, M.K., Chunduru, R.K. and Wood, W.T., 1993. A combined genetic and linear inversion algorithm for waveform inversion. Proceedings of the 63rd Anniversary International Meeting, The Society of Exploration Geophysicists, Washington, D.C., USA, 26-30 September 1993, pp. 692-695.
- Stork, C. and Kusuma, T., 1992. Hybrid genetic autostatics: new approach for large-amplitude statics with noisy data. Proceedings of the 62nd Anniversary International Meeting, The Society of Exploration Geophysicists, New Orleans, Louisiana, USA, 25-29 October 1992, pp. 1127-1131.
- Vanderplaats, G., 1984. Numerical optimization techniques for engineering design. New York: McGraw-Hill Inc.
- Willi, H., Klaus, S., 1981. Test examples for nonlinear programming codes. Berlin Heidelberg: Springer-Verlag.
- Yum, J.S., 1990. Minimum weight design of corrugated bulkhead by G.S.D.M. M.Sc. Thesis. Seoul National University.
Cited by
- Weight reduction and strengthening of marine hatch covers by using composite materials vol.9, pp.2, 2017, https://doi.org/10.1016/j.ijnaoe.2016.09.005
- An integrated beam-plate structure multi-level optimal design framework based on bi-directional evolutionary structural optimization and surrogate model vol.115, pp.None, 2015, https://doi.org/10.1016/j.advengsoft.2017.09.011
- Structural optimization of stiffener layout for stiffened plate using hybrid GA vol.11, pp.2, 2019, https://doi.org/10.1016/j.ijnaoe.2019.03.005
- Fatigue life extension of the lower hopper knuckle connection of a carrier by optimization of the structural arrangement vol.14, pp.4, 2019, https://doi.org/10.1007/s40868-019-00064-1