• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 춘계학술대회논문집
• /
• pp.343-346
• /
• 2003

In order to construct the extrusion die surface of arbitrarily shaped sections, an automatic surface construction method based on NURBS surface and area mapping method is proposed in the present work. In the present study, a center point for area mapping is determined by introducing the marring concept based on constant area proportionality between original billet and final product. The characteristic points of inlet profile is determined using the traditional area mapping method and the root finding numerical method. The inlet and outlet profiles are precisely described with NURBS curves using the characteristic points of entry and exit sections. For the construction of NURBS surface, an interpolation method for the pre-determined two section curves has been developed to be used in the generation of interior control points and weights. To show the validity of the proposed method, automatic die surface generation is carried out for the several kinds of shaped sections.

• 반도체디스플레이기술학회지
• /
• 제16권4호
• /
• pp.63-67
• /
• 2017

In this study, We developed a simple and low cost capacitive pressure mapping sensor and microcontroller-base lock-in amplifier array. We developed capacitive type pressure mapping sensor by forming the electrode and adhesives on plastic films using only the printing process, and the finishing the process by bonding the two films. Lock-in amplifier array was based on a general purpose microcontroller and had only a charge amplifier as analog circuits. In this study, a $10{\times}10$ capacitive type pressure mapping sensor and lock-in amplifier array was fabricated and its characteristics were analyzed.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제11권3호
• /
• pp.153-164
• /
• 2011

Equivalence relations and mappings for crisp sets are very well known. This paper attempts an investigation of equivalence relations and mappings for fuzzy sets. We list some concepts and results related to fuzzy relations. We give some examples corresponding to the concept of fuzzy equality and fuzzy mapping introduced by Demirci [1]. In addition, we introduce the notion of preimage and quotient of fuzzy equivalence relations. Finally, we investigate relations between a fuzzy equivalence relation and a fuzzy mapping.

• 한국산업융합학회 논문집
• /
• 제25권3호
• /
• pp.397-406
• /
• 2022

Recently, research and development to revitalize smart construction are being actively carried out. Accordingly, 3D mapping technology that digitizes construction site is drawing attention. To create a 3D digital map for construction site a point cloud generation method based on LiDAR(Light detection and ranging) using MMS(Mobile mapping system) is mainly used. The purpose of this study is to analyze the accuracy of MMS LiDAR-based point cloud data. As a result, accuracy of MMS point cloud data was analyzed as dx = 0.048m, dy = 0.018m, dz = 0.045m on average. In future studies, accuracy comparison of point cloud data produced via UAV(Unmanned aerial vegicle) photogrammetry and MMS LiDAR should be studied.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2000년도 가을 학술발표논문집 Vol.27 No.2 (1)
• /
• pp.581-583
• /
• 2000

We are studied on the performance optimized synthesis and mapping of design on to one or more FPGA device. our multi-phased approach optimized the key parameters that affect performance by adequately modeling the impact on wire length, routability, and performance during technology mapping to produce designs that have high performance and high routability potential.

• Nonlinear Functional Analysis and Applications
• /
• 제27권4호
• /
• pp.731-742
• /
• 2022

In this paper, we present a new mixed type iterative process for approximating the common fixed points of single-valued nonexpansive mapping and multi-valued nonexpansive mapping in a CAT(0) space. We demonstrate strong and weak convergence theorems for the new iterative process in CAT(0) spaces, as well as numerical results to support our theorem.

• Nuclear Engineering and Technology
• /
• 제53권7호
• /
• pp.2162-2173
• /
• 2021

In this paper, the coupling of fine-mesh computational fluid dynamics (CFD) thermal-hydraulics (TH) code and neutronics code is achieved using the Ansys Fluent User Defined Function (UDF) for code development, including parallel meshing mapping, data computation, and data transfer. Also, some CFD schemes are designed for mesh mapping and data transfer to guarantee physical conservation in the coupling computation. Because there is no rigorous research that gives robust guidance on the various CFD schemes that must be obtained before the fine-mesh coupling computation, this work presents a quantitative analysis of the CFD meshing and mapping schemes to improve the accuracy of the value and location of key physical prediction. Furthermore, the effect of the sub-pin scale coupling computation is also studied. It is observed that even the pin-resolved coupling computation can also create a large deviation in the maximum value and spatial locations, which also proves the significance of the research on mesh mapping and data transfer for CFD code in a coupling computation.

• 로봇학회논문지
• /
• 제17권3호
• /
• pp.322-333
• /
• 2022

The Avatar robot, which is one of the teleoperation robots, aims to enable users to feel the robot as a part of the body to intuitively and naturally perform various tasks. Considering the purpose of the avatar robot, an end-effector identical to a human hand is advantageous, but a robotic hand with human hand level performance has not yet been developed. In this paper we propose a new 3-finger robotic hand with human-avatar hand posture mapping algorithm which were integrated with TOCABI-AVATAR, one of the teleoperation system. Due to the flexible rolling contact joints and tendon driven mechanism applied to the finger, the finger could implement adaptive grasping and absorb the impact force caused by unexpected contacts. In addition, human-avatar hand mapping algorithm using five calibration hand postures propose to compensate physical differences between operators. Using the TOCABI-AVATAR system with the robotic hands and mapping algorithm, the operator can perform 13 out of 16 hand postures of grasping taxonomy and 4 gestures. In addition, using the system, we participated in the ANA AVATAR XPRIZE Semi-final and successfully performed three scenarios which including various social interactions as well as object manipulation.

• 한국멀티미디어학회논문지
• /
• 제6권1호
• /
• pp.15-27
• /
• 2003

Recently, the volume of data is increasing rapidly in server for multimedia service, according to development of multimedia application environment. In recent research for storage technology the technology like of the SAN(Storage Area Network) advantages in scalibility of storage devices, and can read data from multiple disk arrays through RAID 0, 5. The RAID 0 and 5 translate to logical address to physical address using equation, but in case of adding disks at the system with equation -based mapping, the problem that we must rearrange the whole data in the previous disks happens. We use the mapping table to solve this problem in recent, but we can not load the whole mapping table in main memory because it occupies too large space. Therefore the extra I/Os are demanded to evaluate real physical address of data, so total performance of the system is degraded. In this paper, we propose the mapping method that supports the scalibility in RAID 0 or 5 system. The proposing method applies small metadata, so- called SZIT and simple equation, so it is possible that we make translate logical address to physical address rapidly and it is scalable in disk extending simultaneously Our suggesting method, if we add disks to the striping system for expanding of storage capacity, has an advantage of never stop service. So, SZlT-based mapping method can do online-disk-expanding in real-time service.

• Kyungpook Mathematical Journal
• /
• 제59권4호
• /
• pp.665-678
• /
• 2019

We construct an iteration scheme involving a hybrid pair of mappings, one a single-valued asymptotically nonexpansive mapping t and the other a multivalued nonexpansive mapping T, in a complete CAT(0) space. In the process, we remove a restricted condition (called the end-point condition) from results of Akkasriworn and Sokhuma [1] and and use this to prove some convergence theorems. The results concur with analogues for Banach spaces from Uddin et al. [16].