• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 하계종합학술대회 논문집
• /
• pp.745-748
• /
• 1999

This paper propose the method to derive RM(Reed-Muller) expansion coefficients for Multiple-Valued function. The general method to obtain RM expansion coefficient for p valued n variable is derivation of single variable transform matrix and expand it n times using Kronecker product. The transform matrix used is p$^{n}$ $\times$ p$^{n}$ matrix. In this case the size of matrix increases depending on the augmentation of variables and the operation is complicated. Thus, to solving the problem, we propose derivation of RM expansion coefficients using p$\times$p transform matrix and Karnaugh-map.

• 한국전자통신학회논문지
• /
• 제16권2호
• /
• pp.347-354
• /
• 2021

화학공장과 같은 장치산업은 고온·고압·유독성 유체가 배관을 통하여 각종 설비들 사이를 이동한다. 온도변화, 진동, 지진, 지반침하와 같은 주변환경의 변화에 의한 배관의 위치 이동과 파손은 인명피해를 수반하는 큰 사고로 연결되는 경우가 많다. 이러한 사고를 방지하기 위하여 배관에 가해지는 각종 충격을 흡수하고, 보완하여 사고를 미연에 방지하기 위한 여러 가지 종류의 익스펜션 조인트(Expansion Joint)를 사용한다. 따라서 사용된 익스펜션 조인트의 변형을 측정하고, 수명을 예측하는 것은 대형사고를 방지하기 위하여 매우 중요하다. 본 논문에서는 익스펜션 조인트의 변형을 일종의 모션으로 이해하고, Hall Effect Sensor와 9-Axis Sensor를 사용하여 변화를 측정하였다. 그리고 범용의 마이컴보드 아두이노와 C언어를 사용하여 측정된 데이터를 모으고, 분석하여 익스펜션 조인트의 변형을 예측할 수 있는 시스템에 대하여 연구하였다.

• 한국농공학회논문집
• /
• 제49권6호
• /
• pp.105-114
• /
• 2007

This study is to predict the spatial expansion of urban areas by applying CA(Cellular Automata)-Markov technique considering MCE(multi-criteria evaluation) and MOLA(multi-objective land allocation) of factor analysis. For the 10 administration districts$(3677.3km^2)$ including the whole Anseong-cheon watershed, the past six temporal land use data(1973, 1981, 1985, 1990, 1994, 2000) from Landsat satellite images were prepared. During this period, the urban area increased $233.71km^2$. Using the 36 indices composed of topological characteristics, population and land use change, the final factor map of MOLA was produced through 5 maps of MCE. Using 1990 and 1994 land use data, the 2000 predicted urban area of CA-Markov with factor map showed 0.06% improvement of absolute error comparing with that of CA-Markov without factor map. By the CA-Markov technique considering factor map, the 2030 and 2060 urban area increased $58.94km^2(0.78%)\;and\;60.14km^2(0.81%)$ respectively comparing with 2000 urban area$(313.19km^2)$. The 2030 and 2060 paddy area decreased $93.28km^2(2.54%)\;and\;93.65km^2(2.55%)$ respectively comparing with 2000 paddy area$(1383.23km^2)$.

• Journal of the Korean Institute of Landscape Architecture International Edition
• /
• 제1호
• /
• pp.67-74
• /
• 2001

Now that importance of landscape planning unique to each area is emphasized, it is necessary to conduct landscape planning by taking advantage of natural environments unique to each ares, because its natural environments are regarded as one of the assets the area possesses. This study targets at Kawachinagano City, Osaka, one of the residential areas that I not only rich in natural and historical elements, but also has been rapidly growing. The purposes of this study are to evaluate change in landscape structure over time by analyzing relation between landform and pattern of expanding the built-up area at three time points of 1932, 1967, and 1994 with GIS (ARC/INFO 7.0.3, ARC/View 3.0 (ESRI)), as well as to make some suggestions for planning landscape unique to the area. Data on main ridges, sub ridges, main rivers, and other landform were read from the elevation map, and data on woodland, and parks and open spaces (having more than 3 ha area) were read from the existing land use map. The data were used to understand the natural structure of the city from topographic viewpoint. Next, the existing land use map prepared with data on the built-up area and urban axes consisting of roads and streets were overlaid on the elevation map in order to understand relation between pattern of expanding the built-up area and the natural structure.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제4권4호
• /
• pp.655-670
• /
• 2010

To be reversible as a data hiding method, the original content and hidden message should be completely recovered. One important objective of this approach is to achieve high embedding capacity and low distortion. Using predicted errors is very effective for increasing the embedding capacity. Sorting the predicted errors has a good influence on decreasing distortion. In this paper, we present an improved reversible data hiding scheme using upgraded histogram shifting based on sorting the predicted errors. This new scheme is characterized by the algorithm which is able to find the optimum threshold values and manage the location map effectively. Experimental results compared with other methods are presented to demonstrate the superiority of the proposed method.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.498-504
• /
• 2002

Vibration beat phenomenon is theoretically investigated on a slightly asymmetric cylindrical shell, which is a simplified model of Korean bell. Mode pairs of the slightly asymmetric shell are obtained by receptance analysis and impulse response of the shell is derived using modal expansion and Laplace transform. Based on the impulse response model, beat mapping method is proposed to explain the reason that the beat of a bell vibration shows periodic distribution on the circumference. Beat characteristics of King Song-Dok Bell are explained in detail using the beat map and the measured modal data.

• 소성∙가공
• /
• 제21권3호
• /
• pp.207-214
• /
• 2012

High temperature deformation behavior of a $Ni_{30}Fe_{53}Co_{17}$ alloy, with its extraordinary low coefficient of thermal expansion less than $10{\times}10^{-6}K^{-1}$ at temperatures ranging from room temperature to 673K, was investigated by conducting a series of compression tests. From an empirical processing map, the appropriate working temperature-strain rate combination for optimum forming was deduced to be in the ~1373K, $10^{-2}s^{-1}$ region. This region has a relatively high power dissipation efficiency, greater than 0.36. Furthermore, open die forging of a 100mm diameter billets was performed to confirm the variation of thermo-physical properties in relation to microstructure. The coefficient of thermal expansion was found to increase considerably with increasing the open die forging temperature and decreasing the cooling rate, which in turn provides a drastic increase in the average grain size.

• Spatial Information Research
• /
• 제15권2호
• /
• pp.123-134
• /
• 2007

지적공부 등록요소의 확대와 3차원 지적정보체계 구축을 통한 국민의 안정적인 소유권 보호 등을 위해서는 지적도에 건물경계선의 등록이 필요하다. 본 연구에서는 타켓 TS 측량방법과 무타켓 TS 측량 방법의 정확도 및 효율성에 대한 비교를 통하여 무타켓 TS 측량에 의한 건물경계선 등록의 효율성을 제시하고자 하였다. 연구결과, 타켓 TS 측량과 무타켓 TS 측량성과의 RMS오차가 X좌표는 ${\pm}0.056m$, Y좌표는 ${\pm}0.043m$로 산출되어 무타켓 TS 측량성과의 높은 정확도를 확인할 수 있었다. 그리고 무타켓 TS 측량이 타켓 TS 측량에 비해 인원 및 관측시간 소요 면에서 효율적임을 알 수 있었다.

• 환경영향평가
• /
• 제9권3호
• /
• pp.239-248
• /
• 2000

The aggravating water quality from the expansion of industrialization along with increasing population lead to develop more intensive physical measures to secure better drinking water quality. This study was mainly initiated to establish a water-pollutant buffering zone for the upper stream basin of Paldang--the major source area of drinking water for the metropolitan Seoul and suburban areas with a population more than 13 million. Two different criteria were considered in determining the buffering distance from the edge of the streamflow : 1km-width buffer zone for the special protection area which has been strictly controlled by the conventional laws for the protection of drinking water supply, and 500m-width buffer zone for the rest of the area. To delineate the exact boundaries of the water-pollutant buffering zone, GIS database was created integrating topography, hydrography, cadastral, and other related layers. The newly designated water-pollutant buffering zone would contribute to improve the water quality in a long term along with the conservation of the wet land. More study, however, should be made within the water-pollutant buffering zone such as the detailed survey of the pollutants, vegetation, and ecosystem for more effective management of the buffering zone.

• The International Journal of Costume Culture
• /
• 제5권3호
• /
• pp.151-163
• /
• 2002

This study attempted to creat patent map 163 cases of patent for technology of apparel design using computer technology and researched the trend of Patent application by count교, technologies, applicant and filing date. In regard to application by country, the United States mark the first place with 99 cases (61%), Japan marks the second with 34 cases (21%), Korea the third with 19 cases (12%). Comparing the patent applications in specialized technologies, we find the United States is overwhelming the technologies for garment Production Process, Patterning Process and preparatory process, and Japan is currently undergoing development work in this area, while most of Korean applications are focused in the technologies for selection or substitution methods related to Purchase and sale of apparels, body image and design service Therefore, it is required to preoccupy and defend patent rights as well as develop technologies aggressively and extensively in preparation for the expansion of e-commerce market. Analysing the speed of progress in technology in terms of number of applicants and application cases, we can say it entered into developing stage from the middle of 1990s and it seems that they will continue the development work from now on. in case of Korea, they began in 1996, somewhat late, but reached a similar level with the United States in 2000.