• Laser Solutions
• /
• v.9 no.1
• /
• pp.1-7
• /
• 2006

In order to increase the productivity of conventional microstereolithography (MSL), digital micromirror device($DMD^{TM}$) based MSL is proposed and the feasibility of 3D rnicrocomponents fabrication is demonstrated in two ways; free surface and constrained surface techniques. The clearness of optical images at the exposure plane was confirmed for the fabrication of an accurate 3D structure by controlling the dynamic viscosity of FA1260T and the shape accuracy of a structure fabricated with epoxy-based resin ($Somos^{\circledR}$ 10120) was analyzed to determine the optimum curing conditions. After finding the appropriate process variables, the feasibility of multiple microstructures is then demonstrated. Due to the high productivity, MSL using $DMD^{TM}$ showed the potential to replace the existing focused laser beam MSL.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.11 no.2
• /
• pp.35-41
• /
• 1993

The height differences in Mean Sea Level is an important factor in geodetic leveling net, because MSL is the reference datum for height. Geodesists and Oceanographers agree on the height differences in MSL in the east-west direction, but they disagree almost always on the north-south slope, each suspecting systematic errors in the leveling methods of the others. A promising method for determining this slope is comparison of MSL at the tidal station connected by geodetic leveling. The slopes of the sea surface along the coast of Korean Peninsular is estimated from conventional local MSL at the tidal station and bench mark height of first order leveling net in Korea. As a reference level surface, MSL at Inchon is chosen. The results indicate that sea level rises along coast of Korean Peninsular from south to north about 5.5 cm/latitude. In the east-west direction, sea level along East Sea coast stands about 5 cm higher than that along Yellow Sea coast. These are not invariable but provisional phenomena. It may become certain provided that the exact MSL is estimated.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.29 no.4
• /
• pp.393-403
• /
• 2011

In this study, we suggested the period of tide observations is proper to calculate the mean sea level(MSL) precisely on Incheon tide station using wavelet analysis, and newly determined then the vertical reference surface of Korea using the calculated MSL. In order to calculate the height difference between the calculated MSL and specific ground station (ICGP) near the Incheon tide stations, we performed the laser measurements directly to the sea surface where located below ICGP. The orthometric-height of ICGP was determined that corrected the height difference to the calculated MSL using linear interpolation method. Finally, we connected the orthometric-height of ICGP with the original benchmark (ORBM) using GPS leveling methods for determining the new orthometric-height of ORBM. As the results, there is a variation amount of 0.026m between the new MSL was calculated in this study and old MSL was calculated in 1910's. Also, there is a difference of 0.035m between the new and old orthometric-heights of ORBM. The connection (or leveling) error of 0.009m was revealed in new orthometric height of ORBM with consideration of MSL variation which may caused by the error of GPS ellipsoid height and/or geoid model. In this study, we could be determined precisely the orthometric-height of ORBM based on the new MSL of Incheon Bay using only GPS leveling method, not a spirit leveling method. Therefore, it is necessary to determine the vertical datum strictly using long-term and continuously tide observations more than 19 years and to use the GPS leveling method widely in the height leveling work for the effective changeover from the orthonormal to the orthometric in national height system.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.32 no.5
• /
• pp.322-330
• /
• 2020

Modeling for outliers in time series was carried out using the MSL and extreme high, low tide levels (EHL, HLL) data set in the Busan and Mokpo stations. The time-series model is seasonal ARIMA model including the components of the AO (additive outliers) and LS (level shift). The optimal model was selected based on the AIC value and the model parameters were estimated using the 'tso' function (in 'tsoutliers' package of R). The main results by the model application, i.e.. outliers and level shift detections, are as follows. (1) The two AO are detected in the Busan monthly EHL data and the AO magnitudes were estimated to 65.5 cm (by typhoon MAEMI) and 29.5 cm (by typhoon SANBA), respectively. (2) The one level shift in 1983 is detected in Mokpo monthly MSL data, and the LS magnitude was estimated to 21.2 cm by the Youngsan River tidal estuary barrier construction. On the other hand, the RMS errors are computed about 1.95 cm (MSL), 5.11 cm (EHL), and 6.50 cm (ELL) in Busan station, and about 2.10 cm (MSL), 11.80 cm (EHL), and 9.14 cm (ELL) in Mokpo station, respectively.

• Journal of Korean Physical Therapy Science
• /
• v.15 no.4
• /
• pp.1-9
• /
• 2008

Background: This study was to investigate effects of falls prevention exercise on functional fitness in elderly. Methods: A total of 45 healthy over 65years old adults (men=15, women=30) who were participated in this study. Exercise were involved in the period of 12 week complex physical training for around 50 minutes a day, three times per week. We measured subjects' physical activity levels by short physical performance battery(SPPB) test, timed up & go(TUG) test, one leg standing test(OLST) with closed eyes and maximal step length (MSL) test. Results: After falls prevention exercise, there were statically significant differences in SPPB, TUG, OLST and MSL test (P<.01) between pre and post test. There were statically significant differences in SPPB, TUG, OLST, MSL between pre and post test in men and women. There were statically significant differences between men and women in SPPB, TUG, OLST and MSL test. Conclusion: Falls prevention exercise had significant effects on physical fitness level in elderly, with a result increase muscle strength, balance ability and it might prevent falls.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.05a
• /
• pp.199-206
• /
• 1997

For the Korean Next Generation Reactor(KNGR) development, LBB is considered for the Main Steam Line(MSL) piping inside its containment to achieve cost and safety Improvement. To apply LBB concept to MSL, leak sensors highly sensitive to humidity is required. In this paper, a ceramic material, MgCr$_2$O$_4$-TiO$_2$ has been developed as a humidity sensor for MSL applications. Experiments peformed to characterize the electrical conductivity shows that the conductivity of MgCr$_2$O$_4$-TiO$_2$ responds sensitively to both temperature and humidity changes. At a constant temperature below 10$0^{\circ}C$, the conductivity increases as the relative humidity increases, which makes the sensor favorable for application to the outside of MSL insulation layer But as temperature increases beyond 10$0^{\circ}C$, the sensor composition should be adjusted for the application to KNGR is to be made at temperature above 10$0^{\circ}C$.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.26 no.11
• /
• pp.821-825
• /
• 2013

Effect of multi-stacked layer (MSL), 0.1 mol (M) and 0.3 mol (M) hafnium oxide ($HfO_2$) alignment layers were fabricated via a solution-process for LCs orientation. The solutions were spin-coated and annealed in a furnace. MSL consists of three sub-layers using 0.1 M solution, mono-layer (ML) is composed of 0.3 M $HfO_2$ solution. Then ion-beam irradiation was treated with 1.8 keV for 2 min. $HfO_2$-based LC cells were investigated through photographs, pre-tilt angle using crystal rotation method, X-ray photoelectron spectroscopy (XPS) measurement, and surface roughness using atomic force microscopy(AFM) for their characteristic research. Good LC orientation characteristics were observed on MSL $HfO_2$ surface. The LC alignment mechanism on MSL $HfO_2$ and ML $HfO_2$ surfaces was attributed to van der Waals (VDW) interaction between the LC molecular and substrate surface.

• The Korean Journal of Applied Statistics
• /
• v.23 no.6
• /
• pp.1035-1045
• /
• 2010

Products and/or services should be objectively verified in terms of the technological and use-conditional considerations before entering a market. Every organization or company tries to find the better procedure and method for checking the core needs of customers based on their experience in the market and looks for continuous ways to evaluate the power of products and services(PoP). They also prefer the overall evaluation of indices that could reflect various customer needs, rather than a separate evaluation index for each characteristic of the product or service. S. Ko (2008) proposes a Multi-characteristics Sigma Level(MSL) that can simultaneously evaluate many characteristics of a product or service. In this research, using MSL and a new Blue Ocean Index(BOI), an application of NPS, mobile phone field test is considered from a practical and statistical point of view.

• Journal of Microbiology and Biotechnology
• /
• v.18 no.7
• /
• pp.1203-1206
• /
• 2008

A Gram-positive strain designated as MSL-$14^T$ isolated from a soil sample collected from Bigeum Island, Korea, was subjected to polyphasic taxonomy. The isolate was strictly aerobic. Cells were short rods and motile. Optimum growth temperature and pH was 28$^{\circ}C$ and 7.0, respectively. It was characterized chemotaxonomically as having a cell-wall peptidoglycan type based on LL-2,6-diaminopimelic acid and MK-$8(H_4)$ as the predominant menaquinone. The major fatty acids were iso-$C_{16:0}$, $C_{17:1}$ omega8c, and $C_{18:1}$ omega9c. The G+C content was 67.6 mol%. Phylogenetic analysis based on the 16S rRNA gene sequence revealed that strain MSL-$14^T$ is affiliated to the genus Nocardioides and formed a distinct lineage within the genus. MSL-$14^T$ showed highest sequence similarity to Nocardioides aestuarii JCM $12125^T$, having a similarity of 96.5%. Based on the 16S rRNA gene sequence divergence and phenotypic characteristics, it is proposed that strain MSL-$14^T$ should be classified as representing a novel member of the genus Nocardioides, for which we propose the name Nocardioides tritolerans sp. novo The type strain is strain MSL-$14^T$ (=KCTC $19289^T$=DSM $19320^T$).

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.514-517
• /
• 2005

Microstereolithography(MSL) has evolved from the stereolithography technique, and is also based on a light-induced layer-stacking fabrication. Although integral MSL allows the manufacture of a complete layer by one irradiation only, there is a problem related with shape precision due to the light-intensity distribution of focused image. In this study, we developed the integral MSL apparatus using Digital Micromirror Device ($DMD^{TM})$, Texas Instruments) as dynamic pattern generator. It is composed of Xenon-Mecury lamp, optical devices, pattern generator, precision stage, controllers and the control program. Also, we have studied curing depth and width of photocurable resin according to the change of exposure energy.