• 한국포장학회지
• /
• 제4권2호
• /
• pp.39-44
• /
• 1998

We used recording device(EDR-3) to monitor the packages and the vehicle during shipment. Provided we did this enough times, we began to gain statistically valid information which could be used to describe the particular channel of distribution. The event was obviously changed from trip to trip, but in general we could have an idea of what to expect. Considerable amount of time and money were invested to record field data. Although not ideal, it was the best suited approach to gain information regarding a specific distribution channel. Based on the recorded field data, we could make our own packaging vibration testing specification through MIL-STD-810D(Guidance for development of laboratory dynamic test specification). This test specification was proved several times through field tests. As a result, we gained confidence in this revised vibration specification and come to know the development procedures of a laboratory dynamic test specification.

• 한국군사과학기술학회지
• /
• 제14권2호
• /
• pp.299-304
• /
• 2011

In this paper, we developed the semiconductor neutron radiation detector and the multi-purpose radiation detection technologies for the next generation military personal surveymeter. The PIN type semiconductor neutron detector and the prototype measure the neutron radiation dose upto 1,000cGy with ${\pm}20%$ error. It also have a good performance about the Gamma, Alpha and Beta radiation and MIL-STD-810F.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.42-47
• /
• 2014

In this paper, fatigue life analysis of each structure was performed through theoretical analysis method at design stage in order to verify the success or failure of the store's acoustic noise durability according to the Method 515.5 standard of MIL-STD-810F. In addition, experimental analysis was carried out through the ground and flight test by manufacturing the measuring store, and verification of the sound durability was completed through the flight test after manufacture of the actual store. Furthermore, the commercial FEM code through the PSD calculation method applying measured SPL enables verify the durability of new store components development for the future.

• 한국군사과학기술학회지
• /
• 제10권3호
• /
• pp.62-70
• /
• 2007

Most design temperature of environmental test in korea is based on the standard of Department of Defense. There are few studies to establish temperature standard. Besides the representative environmental test guide 'MIL-STD-810F' encourage to tailor to generate the most relevant test data possible and to test to make a match of test environment with operational environment. Under these circumstances, it is irrational to comply with baseless daily cycle. Thus the study about design method of test temperature is essential. So, the daily cycles to be appropriate to the Korean peninsula was presented in this study. And this research shows how to derive two main element, frequency-of-occurrence and daily maximum (minimum) temperature in daily cycles, in case we can not find the daily cycle.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 추계학술대회 논문집
• /
• pp.424-429
• /
• 2013

The trolley carrying the pod moves along by the airfield runway. The pod through the trolley are subjected to vibration arising from the ground state, the precision optical components in the pod can have a significant impact. The road tests were conducted by using the measurement pod to remove the risk for the project. The measurement pod was composed with the ACRA, sensors, battery. The accelerometers were attached to get the acceleration through the road condition. The PSD envelop was calculated by FFT from the acceleration. The driving safety was proven through comparing the measurement data and MIL-STD-810G specification.

• 한국신뢰성학회:학술대회논문집
• /
• 한국신뢰성학회 2005년도 학술발표대회 논문집
• /
• pp.421-430
• /
• 2005

The required standards for environmental tests for communication and electronic equipment used currently are not standards into which the Korean climate and use environment are taken into consideration. But the most used environmental testing standards of the U.S. army(MIL-STD-810) has been used without taking into consideration the Korean domestic situation and conditions by simply translating the US standards. Adherence to these standards may increase in the manufacturing costs according to excessively strict standards. Therefore, this paper will propose a new environmental test standards for temperature.

• 한국기계가공학회지
• /
• 제20권6호
• /
• pp.26-32
• /
• 2021

The antenna is mounted on the vehicle and operated, so its components must be able to withstand the shock that may occur while driving. In this study, the stability of antenna mounted on the vehicle is verified through the connection between modal analysis and transient analysis. The shock data used was taken from MIL-STD-810H, METHOD 516.8. As a result of the analysis of antenna, the maximum equivalent stress 169.49MPa and minimum margin of safety 2.31 has occurred on the bracket of antenna. Thus, it was found that the antenna has enough stability during the operation.

• 한국기계가공학회지
• /
• 제20권6호
• /
• pp.44-50
• /
• 2021

This study analyzed the stability of antenna equipped on vehicles by the link of modal analysis and random vibration analysis with the vibration data of MIL-STD-810H, METHOD 514.8. As a result of the random vibration analysis of antenna, the maximum equivalent stress 41.9MPa and minimum margin of safety 8.37 was generated in the bracket of antenna by the vertical direction vibration. Thus, it was found that antenna has enough stability during the operation.

• 한국산학기술학회논문지
• /
• 제20권12호
• /
• pp.629-635
• /
• 2019

자주포는 운용 특성상 정차상태에서 구동하기 때문에 엔진을 사용할 만큼 많은 에너지가 필요하지 않다. 이와 같은 문제점을 보완하기 위하여 성능개량된 자주포에는 보조동력장치(APU)를 설치하였다. APU를 통하여 엔진의 불필요한 가동을 줄일 수 있고, 이는 엔진의 수명을 늘릴 수 있다. 본 연구에서는 APU 내부 엔진룸의 열 유동을 최적화하기 위하여 Fan과 오일쿨러 적용에 따른 영향을 분석하였다. 열유동 해석을 수행하기 위하여 대기환경과 일사량은 MIL-STD-810을 적용하였다. 흡입구/배출구 Fan을 적용한 경우(Case1), 흡입구 Fan과 오일쿨러를 적용한 경우(Case2), 흡입구/배출구 Fan과 오일쿨러를 적용한 경우(Case3) 3가지에 대하여 열유동을 해석하였다. 해석결과 Case3의 실린더 헤드 온도가 Case1 보다 21.4℃, Case2 보다 8.0℃ 낮은 것을 확인하였다. 해석결과에 대한 타당성을 검토하기 위하여 동일 외기조건에서 실험을 진행하였다. 해석수치와 실험결과가 7%이하의 차이를 나타냈다. 이를 통하여 APU 열유동 최적화 모델이 설계조건을 만족하는 것을 확인하였다. 본 연구결과를 통하여 추후 개발하는 타 군용 APU 열유동 최적화에 대한 기초자료로 사용될 것으로 기대된다.

• 전기전자학회논문지
• /
• 제24권1호
• /
• pp.347-353
• /
• 2020

본 논문에서는 차기구축함에 탑재될 통합 마스트의 레이더 반사면적을 감소시킬 수 있는 스텔스 기술로 응용하기 위해 해양 환경이 모사된 온도 환경 조건에서 전자기파 메타물질 흡수체의 내구성을 검증하였다. 이를 위해 미국 군사 규격인 MIL-STD-810H의 Method 501.7 중 Procedure I 조건에 따라 주기적으로 온도를 조절할 수 있는 항온 챔버에 저장 후 전자기파 메타물질 흡수체의 반사도를 측정하였다. 고온 환경시험 전과 후 모두 X 밴드 전체에서 스텔스 성능을 충족시킬 수 있는 -10 dB 미만의 반사도가 확인되었다.