• Title/Summary/Keyword: MCM-C

Search Result 117, Processing Time 0.027 seconds

Optimization for Mycelial Growth and Inhibitory Effect on Nitric Oxide Production of Cordyceps nutans Pat. (노린재동충하초의 배양 최적화 및 NO 생성 저해 효과)

  • Lee, Ki-Man;Lee, Geum-Seon;Nam, Sung-Hee;Lim, Sung-Cil;Kang, Tae-Jin
    • Korean journal of applied entomology
    • /
    • v.50 no.4
    • /
    • pp.307-314
    • /
    • 2011
  • Cordyceps (vegetable wasp and plant worm), an entomopathogenic fungi, has been used as a herbal medicine in Asian countries since ancient times. Cordyceps nutans is common but there is little research on this species. This study investigated the optimal culture conditions of C. nutans and the inhibitory effect on nitric oxide (NO) production in RAW 264.7 cell treated culture broth. The optimal conditions for the mycelial growth were $25^{\circ}C$ and pH 7.0-8.0. Mycelial growth was highest on mushroom complete medium (MCM), V8 juice agar (V8A), and yeast malt dextrose (YMD) medium. Mycelial growth on mushroom minimal medium (MMM) did not occur, so nutrient source was essential. Dextrose and sucrose as carbon sources, and ammonium citrate as a nitrogen source were satisfactory for mycelial growth. Cytotoxicity of C. nutans culture broth was not found in RAW 264.7 cells. C. nutans culture broth suppressed NO production of lipopolysaccharide (LPS)-stimulated RAW 264.7 cell in a dose-dependent manner. Thus, our results provided the optimal conditions for cultivation of C. nutans and showed that C. nutans may have excellent physiological activities.

Transmission Line Parameter Extraction and Signal Integrity Verification of VLSI Interconnects Under Silicon Substrate Effect (실리콘 기판 효과를 고려한 VLSI 인터컨넥트의 전송선 파라미터 추출 및 시그널 인테그러티 검증)

  • 유한종;어영선
    • Journal of the Korean Institute of Telematics and Electronics C
    • /
    • v.36C no.3
    • /
    • pp.26-34
    • /
    • 1999
  • A new silicon-based IC interconnect transmission line parameter extraction methodology is presented and experimentally examined. Unlike the PCB or MCM interconnects, a dominant energy propagation mode in the silicon-based IC interconnects is not quasi-TEM but slow wave mode(SWM). The transmission line parameters are extracted taking the silicon substrate effect (i.e., slow wave mode) into account. The capacitances are calculated considering silicon substrate surface as a ground. Whereas the inductances are calculated by using an effective dielectric constant. In order to verify the proposed method, test patterns were designed. Experimental data have agreement within 10%. Further, crosstalk noise simulation shows excellent agreements with the measurements which are performed with high-speed time domain measurement ( i.e., TDR/TDT measurements) for test pattern, while RC model or RLC model without silicon substrate effect show about 20~25% underestimation error.

  • PDF

A Gridless Area Router for Multichip Module Design (다중칩 모듈 설계를 위한 Gridless 배선기)

  • Lee, Tae-Sun;Rim, Chong-Suck
    • Journal of the Korean Institute of Telematics and Electronics C
    • /
    • v.36C no.9
    • /
    • pp.28-43
    • /
    • 1999
  • In this paper, we present a gridless router for MultiChip Modules (MCM). Because our router uses corner stitching data structures, not a routing grid, to represent the routings status, it allows arbitrary location of pins, and routes variable-width wires, without a considerable waste of area from bulky vias. A routing speed is a very important factor because a gridless routing approach is known its computation is hard and complex, and MCM routing problem has so large routing area and layers. Our router completes the routing faster than the most of previously reported grid-based routers, with comparable routing result, by using SEGRAs routing algorithm whose very fast speed is proved, and the characteristics of the effective data structure.

  • PDF

Viral Effects of a dsRNA Mycovirus (PoV-ASI2792) on the Vegetative Growth of the Edible Mushroom Pleurotus ostreatus

  • Song, Ha-Yeon;Choi, Hyo-Jin;Jeong, Hansaem;Choi, Dahye;Kim, Dae-Hyuk;Kim, Jung-Mi
    • Mycobiology
    • /
    • v.44 no.4
    • /
    • pp.283-290
    • /
    • 2016
  • A double-stranded RNA (dsRNA) mycovirus was detected in malformed fruiting bodies of Pleurotus ostreatus strain ASI2792, one of bottle cultivated commercial strains of the edible oyster mushroom. The partial RNA-dependent RNA polymerase (RdRp) gene of the P. ostreatus ASI2792 mycovirus (PoV-ASI2792) was cloned, and a cDNA sequences alignment revealed that the sequence was identical to the RdRp gene of a known PoSV found in the P. ostreatus strain. To investigate the symptoms of PoV-ASI2792 infection by comparing the isogenic virus-free P. ostreatus strains with a virus-infected strain, isogenic virus-cured P. ostreatus strains were obtained by the mycelial fragmentation method for virus curing. The absence of virus was verified with gel electrophoresis after dsRNA-specific virus purification and Northern blot analysis using a partial RdRp cDNA of PoV-ASI2792. The growth rate and mycelial dry weight of virus-infected P. ostreatus strain with PoV-ASI2792 mycovirus were compared to those of three virus-free isogenic strains on 10 different media. The virus-cured strains showed distinctly higher mycelial growth rates and dry weights on all kinds of experimental culture media, with at least a 2.2-fold higher mycelial growth rate on mushroom complete media (MCM) and Hamada media, and a 2.7-fold higher mycelial dry weight on MCM and yeast-malt-glucose agar media than those of the virus-infected strain. These results suggest that the infection of PoV mycovirus has a deleterious effect on the vegetative growth of P. ostreatus.

A Study on the Effect of Polyetherimide Surface Treatment on the Adhesion and High Temperature/High Humidity Reliability of MCM-D Interface (Polyetherimide 접착제의 표면 처리에 따른 MCM-D 계면 접착력 및 고온고습 신뢰성 변화에 관한 연구)

  • Yoon, Hyun-Gook;Ko, Hyoung-Soo;Paik, Kyung-Wook
    • Korean Journal of Materials Research
    • /
    • v.9 no.12
    • /
    • pp.1176-1180
    • /
    • 1999
  • The adhesion strength and high temperature/high humidity reliability of polyetherimide (PEI) adhesive on silicon wafer after being treated by each reactive ion etching (RIE) Aluminum (Al)-chelate adhesion promoter were investigated. 180$^{\circ}$ peel test and <85$^{\circ}C$ 85%> humidity test were performed for the initial adhesion strength and high temperature/high humidity reliability, respectively. For investigating surface effect scanning electron microscope (SEM), atomic force microscope (AFM), deionized (DI)-water contact angle studies were carried out. To investigate RIE effect, PEI was treated with $^O_2$ RIE, and then laminated. The initial peel strength increased slightly from 1.6 kg/cm for the first 2 minutes, and then decreased. High temp/high humid resistance decreased rapidly by RIE etching. RIE treatment on PEI affected on both of roughness and hydrophilicity increase. Aluminum-chelate adhesion promoter was coated by spinning on silicon wafer. The initial peel strength showed no effect of adhesion promoter treatment, but high temp/high humidity resistance increased remarkably. Al-chelate adhesion promoter did not affect the roughness but increased hydrophilicity.

  • PDF

Cultivation technique using plastic container and selection the superior strain of nameko mushroom (Pholiota nameko) (맛버섯(Pholiota nameko) 우량균주 선발 및 병 재배법)

  • Jung, Kyung-Ju;Choi, Duck-Soo;Choi, Hyeong-Gug;Kim, Joung-Keon;Chung, Ki-Chul
    • Journal of Mushroom
    • /
    • v.5 no.2
    • /
    • pp.51-58
    • /
    • 2007
  • These experiment was conducted to find the superior strain selection, cultivation technique and optimum environmental condition of nameko mushroom culture using plastic container. The results was following as Mycelium of Pholiota nameko grown well at MCM and Hamada media, and its media acidity was pH 6~7. The optimum temperature condition for growing mycelium was $25^{\circ}C$. Under $15^{\circ}C$ and above $30^{\circ}C$ of temperature condition, mycelium growing speed was delayed remarkably. Among the 29 strains of nameko mushroom, the most productive strains was JNM19007, JNM19026, JNM19027 and JNM19028. The optimum media composition rate for produce fruitbody was pine sawdust 80% + wheat bran 20%. In this condition, the average fruitbody amount was 188g per 1,100cc container. The optimum post-culturing period was 50 days and mushroom sprout appeared 7 days after old mycelia removed. The suitable temperature was $12^{\circ}C$ for induce sprout, growing period was $16^{\circ}C$ and the optimum relative humidity was 95% in all culturing periods.

  • PDF

Mycelial characteristics for the artificial cultivation of Inonotus obliqua (Pers.) Pilot (차가버섯(Inonotus obliqua) 인공재배를 위한 균사 배양적 특성)

  • 장현유
    • Korean Journal of Plant Resources
    • /
    • v.15 no.2
    • /
    • pp.135-143
    • /
    • 2002
  • The results of examining characteristics of mycelial growth and culture condition for determining the condition of artificially culturing Inonotus obliqua (chaga) are as follows. 1) Mycelial growth and density oft, oblique were the highest in the medium of BDA (Birch Dextrose Agar; 66.3mm/10d) followed by the order of GDA, PDA, CDA, PODA, ODA, YM, MCM, MEA (pH 7.0), CHA, and MEA (pH 4.7). 2) Optimal temperature for the mycelial growth and density of 1. obliqua were shown to be 30$^{\circ}C$, but the mycelia were dead at 40$^{\circ}C$. the mycelial growth and density of KNAC3005 strains was the highest at 30$^{\circ}C$(66.3mm/10d) followed by the order of 25, 20, 15, 35, 10, and 5$^{\circ}C$. 3) Optimal pH for the mycelial growth and density were revealed to be 6.0 (88.4mm/10d). Above or below pH 6.0, the mycelial growth and density were shown to be retarded. 4) Optimal carbon, nitrogen and organic acid sources for the spawn growth of 40 were maltose (331mg/25$m\ell$/15d), peptone (347mg/25$m\ell$/15d), and glutamic acid (357mg/25$m\ell$/15d), respectively. Optimal level of biotin was 370mg/15d and optimal C/N ratio was 40.

Cultural characteristics of unrecorded species Lentinula spp. in Korea (국내 미기록 표고속 종들(Lentinula spp.)의 배양적 특성)

  • Kim, Kwang-Sang;Kim, Gyeong-Je;Kim, Hyun-Seok;Jin, Seong-Woo;Kim, Jin-Kyoung;Ban, Seung-Eon
    • Journal of Mushroom
    • /
    • v.7 no.4
    • /
    • pp.193-199
    • /
    • 2009
  • The culture condition of unrecorded species L. aciculospora, L. boryana and L. raphanica was investigated with recorded species of L. edodes as the control group in order to analyze diversity and examed relations of the species belong to Lentinula. The optimal temperature and media for the mycelial growth of L. aciculospora and L. boryana were $22^{\circ}C$ and PDA, MCM medium. L. raphanica was $28^{\circ}C$ and ME1 medium. Each of L. aciculospora, L. boryana, L. raphanica is pH 6, pH 7, pH 5 in the optimal pH respectvely. The optimal carbon and nitrogen source of L. aciculospora were glucose and malt extract. That of L. boryana was glucose and urea that of L. raphanica was sucrose and potassium nitrate. The optimal vitamin of L. aciculospora was Myo-inositol. That of L. boryana and L. raphanica were Riboflabin.

  • PDF

Acceptor and transglycosylation reaction by mixed dextransucrase prepared from Leuconostoc mesenteroides B-512MCM, 742CB3, 1299C

  • Park, Hyeon-Jeong;Lee, So-Yeong;Ryu, Hwa-Ja;Lee, Jin-Ha;Kim, Do-Man;Kim, Do-Won
    • 한국생물공학회:학술대회논문집
    • /
    • 2002.04a
    • /
    • pp.235-238
    • /
    • 2002
  • Leuconostoc mesenteroides B-512FMCM, 742CB3, 1299C의 dextransucrase들의 glycosyl기 전이 특성을 수용체 반응과 transglycosylation반응을 통해 확인하였다. 수용체 반응의 경우 10% sucrose에 수용체로 4% maltose를 첨가하여 반응시켰고 transglycosylation반응은 다른 크기, 다른 농도 그리고 다른 종류의 가지 결합의 dextran 을 합성하는 효소들을 이용하여 수행하였다. 각각의 효소들은 maltose를 이용한 수용체 반응에서 유사한 종류의 수용체 산물들을 합성한 것에 비해 세 dextransucrase들 (512FMCM, 742CB3, 1299C) 을 일정 비율로 혼합하여 maltose를 이용한 수용체 반응 결과 512FMCM 효소의 활성 비율을 줄이고 742CB3, 1299C 효소의 활성 비율을 증가시켰을 경우에는 ${\alpha}-1{\rightarrow}$3 의 가지결합이 많은 dextran 을 합성하였다. 또한, 세 가지 다른 구조의 dextran(T40, 742CB, B1299)에 100mM maltose을 수용체로 첨가해 각각의 dextransucrase(512FMCM, 742CB3, 1299C)와 transgly cosylation을 수행한 결과 1299C 효소가 세 종류의 dextran(T40, 742CB, B1299) 에 모두 가지 결합이 많은 dextran을 합성함을 확인하였다. 또한 ${\alpha}-1{\rightarrow}$6 결합으로 주로 이루어진 2%, 5% dextran(T10, T40, T7O, T500, T2000)에 dextransucrase(512FMCM, 742CB3, 1299C)를 반응시켜 기존의 dextran 보다 가지 결합이 더 많이 형성된 transglycosylation 산물을 합성하였다. 이때 maltose를 첨가했을 경우 이 수용 체에 의해 많은 ${\alpha}-1{\rightarrow}$6 가지 결합의 dextran 을 합성함을 확인하였다.

  • PDF

Culture Conditions for Mycelial Growth of Coriolus versicolor

  • Jo, Woo-Sik;Kang, Min-Jin;Choi, Seong-Yong;Yoo, Young-Bok;Seok, Soon-Ja;Jung, Hee-Young
    • Mycobiology
    • /
    • v.38 no.3
    • /
    • pp.195-202
    • /
    • 2010
  • Coriolus versicolor, is one of the most popular medicinal mushrooms due its various biologically active components. This study was conducted to obtain basic information regarding the mycelial culture conditions of C. versicolor. Based on the culture, and MCM media were suitable for the mycelial growth of the mushroom. The optimum carbon and nitrogen sources were dextrin and yeast extract, respectively, and the optimum C/N ratio was 10 to 2 when 2% glucose was used. Other minor components required for optimal growth included thiamine-HCl and biotin as vitamins, succinic acid, lactic acid and citric acid as organic acids, as well as $MgSO_4{\cdot}7H_2O$ as mineral salts.