• Korean Journal of Heritage: History & Science
• /
• v.46 no.3
• /
• pp.48-67
• /
• 2013

This study was focused on the recognition of historical values and the establishment of conservation schemes for a Silla stone monument in Bongpyeong-ri, Uljin by combining the humanistic investigation of inscription reinterpretation and the scientific conservational diagnosis of deterioration. According to the investigation of inscription, a total of 13 letters were reconsidered compared to the preceding researches. Thus, the meaning and interpretation of previous inscription was partially changed. This monument is composed of gneissose leucogranite and the most suitable site as provenance of the stone would be the Jukbyeon seashore (2.1km). The site shows similar color, size and composition of minerals, gneissose structure and magnetic susceptibility as the Bongpyeong stone monument. This monument developed a structural crack (crack index 0.4) and a microcrack (crack index 2.0) along the gneissose structure. The horizontal strength is weaker than the vertical strength. Therefore, the cracks should be reinforced and treated. However, consolidating is not urgently needed because the total weathering grade by ultrasonic velocity shows the stage of moderate weathering(3,403m/s, 0.32). Also, the major problems of chemical deterioration are blackening (85.2%) with soil, iron oxide,rubbing mark, and salt crystals (17.3%) from the sea. Therefore, the contaminants and the salt crystals should be removed using pressure spray and pulp paper, while the application of poultice should be examined through clinical tests.

• Journal of the Korean School Mathematics Society
• /
• v.21 no.4
• /
• pp.303-326
• /
• 2018

Fraction has difficulties in learning because of the diversity of meanings, the ways of presenting contents and teaching methods in elementary school mathematics. Therefore, the various strategies of teaching of fraction concept is proposed as an alternative. The problem of equal sharing problem is that children can experience the concept of fractions naturally in the context of everyday distribution. Even before learning formal fractions, children can solve them in various ways based on their own experiences. The purpose of this study is to investigate the degree of problem solving and problem solving strategies for children in 2nd, 4th, and 6th grades in elementary school. As a result of the research, the percentage of correct answers increased as the grade increased, but the grade levels showed a difference depending on the numbers given to the problems. Also, there were differences in the problem solving strategies according to the grade levels. Also, according to the numbers presented in the problem, the percentage of correct answers was high in items that were easy to divide, and the percentage of correct answers was low in items that were difficult to divide. When children solved the problems, they were affected by the strategies they could use immediately according to the number presented in the problem, and their learning experiences were also affected.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.12
• /
• pp.660-668
• /
• 2018

The main object of this study was to find a way to operate the marker for simulating a virtual construction using a MR(mixed reality) device. The secondary object was to find a way to extract the form-data from BIM data, and to represent the virtual object by the MR device. A tiny error of scale causes large errors of length because the architectural objects are very large. The scale was affected by the way that the camera of the MR device recognizes the marker. The method of installing and operating the marker causes length errors in the virtual object in the MR system. The experimental results showed that the error factor of the Virtual object's length was 0.47%. In addition, the distance between the markers can be decided through the results of an experiment for the multi-marker tracking system. The minimum distance between markers should be more than 5 m, and the error of length was approximately 23mm. If the represented virtual object must be less than 20mm in error, the particular mark should be installed within a 5 m radius of it. Based on this research, it is expected that utilization of the MR device will increase for the application of virtual construction simulations to construction sites.

• Journal of The Korean Society of Emergency Medicine
• /
• v.29 no.6
• /
• pp.649-655
• /
• 2018

Objective: This paper reports the possibility of using of a locking horizontal mattress suture technique in repairing lacerations that are difficult to suture with staples. Methods: Data were collected retrospectively over a 6-month period regarding the routine repair of scalp lacerations: those in areas injured by a high energy blunt mechanism, continued to bleed after pressure, nonlinear or damaged skin repaired with a locking horizontal mattress technique, and simple interrupted technique. The effects of the two techniques used to repair scalp lacerations on wound healing, complication rate, and patient satisfaction were examined. The categorical variables are expressed as the number and percent. A Mann-Whitney-Wilcoxon test was used for statistical analysis. A P-value less than 0.05 was considered significant. Results: Thirty-seven consecutive patients with scalp lacerations presented for care. Wound closure was accomplished with the locking horizontal mattress sutures in 40.5% (n=15) (median length, 5.0 cm; interquartile range [IQR], 4.0-7.0 cm). Simple interrupted sutures (median length, 4 cm; IQR, 3.0-5.0 cm) were used in 59.5% (n=22) (P=0.015). The frequency of additional bandage compression (P=0.008), frequency of exudative hemorrhage (P=0.018), and suture mark frequency at suture removal (P=0.047) were significantly lower in the locking horizontal mattress group. Conclusion: The locking horizontal mattress suture, which has the advantage of a horizontal mattress suture, may be one of the ways that can be used alternatively to treat scalp lacerations that difficult to suture with staples.

• Journal of the Korean earth science society
• /
• v.42 no.2
• /
• pp.185-194
• /
• 2021

A lava dome and sheet lava flow can be observed at the seashore of Aewol, Jeju island. The cylindrical lobes are characterized by a concentric structure consisting of a massive core and radial joints. Columnar joints with different thickness between the upper and lower parts are developed in the sheet lava flow around the rock salt field in Goeomri. The upper part of the columnar joints is uneven in shape, and has a diameter of 120-150 cm. The lower part of the columnar joints is hexagonal and pentagonal in shape, and has a diameter of about 60 cm. The cylindrical lobes can be divided into two groups based on size and shape. One is a megalobe, with a semicircular outline and a maximum diameter of 30 m. The other is a circular lobe with a diameter of less than 10 m. The columns in the radial joints have hexagonal and pentagonal cross sections and gradually increasing diameter, outward from the core, to a size of 80-120 cm at the rim. The concentric structure observed in the cylindrical lavas is attributable to a combination of four factors. The first is a circular crack caused by the decrease of the temperature and density difference between the inside and outside of the cylindrical lava flow. The second is a concentric chisel mark of the radial joints, which formed at the same time as the radial joints. The third is a flow band, which is a trace left in a round passage when lava flows through. The fourth is a vesicular band formed in a cave by gas bubbles escaping from the lava flow.

• Journal of the Korean Institute of Gas
• /
• v.25 no.2
• /
• pp.22-27
• /
• 2021

This paper is a purpose to study the failure examples for LPG vehicle. The first example, the researcher certified the incongruity phenomenon decreased engine power by ignition fire leakage because of spark plug threaded part damage assembling in cylinder head. The second example, the timing mark that accurately adjusting the camshaft and crankshaft position were twisted about 0.5 block each other. Finally, the researcher seeked the disharmony phenomenon as it couldn't set ignition timing. The third example, the researcher knew the failure phenomenon by interrupted the closing period for intake valve moving with air flow in the number 3 port of cylinder head as the foreign substance in cylinder head didn't remove. Therefore, the manager of a car has to thorough going inspect and the manufacture of a car must remove the cause of failure with quality assurance.

• Journal of the Economic Geographical Society of Korea
• /
• v.22 no.3
• /
• pp.258-273
• /
• 2019

Bilbao, Spain, made a mark as a example of the regional revitalization by culture and tourism. Korean Government have a perspective that culture and tourism could be an alternative to the regional crisis of manufacturing in 2018. The main purpose of this study is to analyze the locational specificity and the revival strategies for the regional development of Bilbao in a structural context. This could provide implications to the regional crisis of Korea. The main results are summarized as follows. Firstly, the local government of Bilbao has taken an active role, using not only its political and financial autonomy but also its locational advantage as an important nodal region of transnational trade networks in Europe. Secondly, Bilbao was able to sustain its regional revitalization initiatives for a long period by facilitating public-private partnership system. Finally, despite the effectiveness of the mega project and place marketing, low job security and the polarization of the service sector have emerged as a problem at the same time. Still, the deindustrialization of Bilbao could be possible due to the various services including knowledge-based services and financial services as well as culture and tourism.

• (The)Study of the Eastern Classic
• /
• no.56
• /
• pp.75-115
• /
• 2014

The text reviewed in this paper "Dongbangsaek is the Secret (Dongbangsaegi bigyeorira)" is in the collection of the Yulgok Memorial Library of Dankook University. With 13 leaves ($35.7{\times}22.3cm$) bound with thread, the booklet has been transcribed by hand. Although there is no record on the place, person and year of transcription, it is estimated to have been transcribed in the 20th century based on the use of the period, a punctuation mark. In addition, the complete absence of dialect vocabulary also shows that it was transcribed in the capital area-Seoul or Gyeonggi Province. It is assumed that the text is part of a Buddhist scripture chanted by an exorcist during a shamanistic ritual. As a booklet containing secret methods to divine what is auspicious and what is ominous in daily life, it must have been transcribed by an exorcist to use it for her ritual.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.17 no.6
• /
• pp.131-142
• /
• 2007

In this paper, semi-fragile watermarking algorithm was proposed for the application to RP(Rapid Prototyping) system. In the case of the perceptual change or distortion of the original one, the prototype product will be affected from the process because the RP system requires the high precision measure. Therefore, the geometrical transformations like translation, rotation and scaling, the mesh order change and the file format change are used in the RP system because they do not change the basic shapes of the 3D models, but, the decimation and the smoothing are not used because they change the models. The proposed algorithm which is called semi-fragile watermarking is robust against to these kinds of manipulations which preserve the original shapes because it considers the limitations of the RP system, but fragile against to the other manipulations which change the original shapes. This algorithm does not change the model shapes after embedding the watermark information, that is, there is no shape difference between the original model and the watermarked model. so, it will be useful to authenticate the data integrity and hide the information in the field of mechanical engineering which requires the high precision measure.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.1
• /
• pp.29-37
• /
• 2021

In the event of a marine pollution accident, Korea, which is bordered by the sea on three sides, would suffer tremendous damage. According to an analysis of marine pollution accidents in Korea, most pollutants were small fishing boats and tugboats. In particular, urgent safety measures are required due to the high incidence of marine pollution accidents caused by stranded tugboats. This study aims to decrease secondary marine pollution accidents by preparing measures to prevent accidents by stranded tugboats, the main source of pollution accidents. To this end an experiment was conducted to mark 63 locations where stranded accidents have occurred on the GPS plotters of 61 tugboats operating in Boryeong sea area. Its effectiveness was then investigated. The result showed that there was no stranded accident by the subject ship during the 20-month experiment period. As a result of survey of the captains, 36 out of 40 respondents (90%) stated that the experiment was significantly helpful in ensuring safe navigation, thus confirming its effectiveness. Various measures were proposed to prevent stranded accidents, including providing information to manufacturers and users by marking the location of grounded accidents on GPS plotters and posting the location information of unknown reefs on the official website of institution Korea Hydrographic and Oceanographic Agency.