• The Journal of the Convergence on Culture Technology
• /
• v.9 no.6
• /
• pp.1103-1109
• /
• 2023

Today, as the number of audio files submitted as legal evidence increases with the proliferation of smartphones, the integrity of audio files has become an important issue. Accordingly, the purpose of this study is to explore whether the metadata and file structure of audio files recorded on Samsung smartphones can be manipulated to be identical to the original. This study was based on Samsung smartphones, the most widely used in Korea, and conducted experiments on the built-in voice recording app and the 'Easy Voice Recorder' app, which is the most popular recording app. Through the experiments of this study, it was proven that the metadata and file structure of audio files can be manipulated. Therefore, this study reveals that metadata and file structure analysis have limitations in proving the integrity when audio files are analyzed for adoption as legal evidence. They also argue for the need to develop new voice file forgery technology that does not rely on metadata and file structure analysis.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.4
• /
• pp.534-544
• /
• 2019

Because the pile-bent of IPM Bridge is projected from the soil surface, excessive displacement of abutment can be induced. According to design guide of IPM Bridge, the shape of the bridges used in this study was applied to the maximum applicable 120.0m span, 30-degree for skew angle, and 10.0m for the protruded pile-bent height. The maximum displacement by the maximum span application condition of the IPM Bridge was calculated using this bridge model, and the safety of a horizontal displacement of the IPM Bridge was investigated based on the allowable displacement presented by Bozozuk. The maximum horizontal displacement of the IPM Bridge was calculated to be larger in the winter shrinkage condition than in the summer expansion condition, the horizontal displacements were more affected by the length of a bridge than by the skew angle. And the vertical displacement was not affected by the skew angle and length. As the span increases, the horizontal displacement increases significantly, the horizontal displacement at 120.0m span length was found to exceed the allowable displacement proposed by Bozozuk. However, the moment generated in the pile-bent did not exceed the plastic moment.

• Proceeding of KASS Symposium
• /
• 2008.05a
• /
• pp.212-217
• /
• 2008

This paper is concerned with the structural design of Angola Stadium. The Angola stadium is composed of a Steel moment frame system and a Cantilever steel truss roof. Whole structural analysis is necessary to ensure the stability. Considered FEM analysis, Design of Wind load & Seismic, Stand diaphragm, interaction between stand and Roof, Serviceability.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.42 no.6
• /
• pp.825-836
• /
• 2022

Micropiles can be used to support additional load in extended building structures. However, their use brings about a risk of exceeding the bearing capacity of existing piles. In this study, pre-compression was applied to distribute the load of an existing building to micropiles, and an indoor loading test was performed to confirm the structural applicability of a wedge-type anchorage device designed to improve its capacity. According to the test results, the maximum strain of the anchorage device was 0.63 times that of the yield strain, and the amount of slip generated at the time of anchorage was 0.11 mm, satisfying structural standards. In addition, using MIDAS GTS, a geotechnical finite element analysis software, the effect of the size of the pre-compression, the thickness of the soil layer, and the ground conditions around the tip on the reaction force of the existing piles and micropiles were analyzed. From the numerical analysis, as the size of the pre-compression load increased, the reaction force of the existing pile decreased, resulting in a reduction rate of up to 36 %. In addition, as the soil layer increased by 5 m, the reduction rate decreased by 4 %, and when the ground condition at the tip of the micropile was weathered rock, the reduction rate increased by 14 % compared with that of weathered soil.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.6A
• /
• pp.389-398
• /
• 2012

In this study, structural strain responses of the jacket-type Uldolmok tidal current power plant structure under severe tidal environments were measured and analyzed using long-term measurement system during construction and also operation. It was observed that there were significant changes in strain responses at the steps of jacket lifting, block loading, pile ejection and insertion. Strains due to dead loads and tidal loads were analyzed before and after removal of a jacket leg, and it was also found that the strains due to dead load were much significantly changed after jacket leg removal. From the measurement data during operation, it was found that strain responses were fluctuated with M2 and M4 tidal periods and also relatively short period of about 10 min due to the peculiar tidal characteristics in the Uldolmok strait. Finally, the neural network-based non-parametric estimation models were investigated to build up the signal-based structural damage monitoring system.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.250.2-250.2
• /
• 2015

결정질 태양전지의 변환효율은 이미 이론적 한계에 가까워져, 최근 산업에서는 이 대신 제조공정 단가를 낮추려는 연구가 진행되고 있다. 본 연구에서는 태양전지 도핑공정에 대기압 DBD 플라즈마를 응용하여 저렴하게 태양전지를 제작할 수 있는 방법을 모색한다. 대기압 DBD 플라즈마를 발생시키기 위해 DC-AC 인버터 구조의 전원을 사용하여 수십 kHz의 주파수, 수 kV의 전압을 인가하여 $5cm{\times}1cm$ 직사각형 모양의 아노다이징된 알루미늄 전극을 사용하였다. 전극과 Ground 사이에 Argon 가스를 주입하여 플라즈마를 발생시켰으며, 출력전류는 수십 mA의 전류가 측정되었다. $3cm{\times}3cm$의 P-type wafer에 스핀코팅 방식으로 H3PO4를 도포한 후, Wafer 표면에 플라즈마를 조사하여 대기압 DBD 플라즈마를 이용한 태양전지 도핑 가능성을 확인하였다. 플라즈마 출력 전류와 플라즈마 조사시간을 변수로 도핑된 Wafer의 특성을 확인하였다. 도핑 프로파일은 SIMS (Secondary Ion Mass Spectrometry)를 통해 측정하였으며, 전기적인 특성은 4 point probe로 면저항을 측정하였다. 대기압 DBD 플라즈마를 이용해 도핑된 wafer에 전극을 형성하여, 같은 도펀트를 사용하여 Furnace로 열 확산법을 이용해 도핑 공정을 진행한 wafer와 변환효율(Conversion efficiency)을 측정하여, 대기압 플라즈마를 이용한 도핑 가능성을 확인하였다.

• Journal of radiological science and technology
• /
• v.35 no.4
• /
• pp.345-352
• /
• 2012

As the breast cancer rate is increasing fast in Korean women, people pay more attention to mammography and number of mammography have been increasing dramatically over the last few years. Mammography is the only means to diagnose breast cancer early, but harms caused by radiation exposure shouldn't be overlooked. Therefore, it is important to calculate the radiation dose being absorbed into the breast tissue during the process of mammography for a protective measure against radiation exposure. Because it is impossible to directly measure the radiation dose being absorbed into the human body, statistical calculation methods are commonly used, and most of them are supposed to simulate the interaction between radiation and matter by describing the human body internal structure with anthropomorphic phantoms. However, a simulation using Geant4 Code of Monte Carlo Method, which is well-known as most accurate in calculating the absorbed dose inside the human body, helps calculate exact dose by recreating the anatomical human body structure as it is through the DICOM file of CT. To calculate the absorbed dose in the breast tissue, therefore, this study carried out a simulation using Geant4 Code, and by using the DICOM converted file provided by Geant4, this study changed the human body structure expressed on the CT image data into geometry needed for this simulation. Besides, this study attempted to verify if the dose calculation of Geant4 interlocking with the DICOM file is useful, by comparing the calculated dose provided by this simulation and the measured dose provided by the PTW ion chamber. As a result, under the condition of 28kVp/190mAs, the Difference(%) between the measured dose and the calculated dose was found to be 0.08 %~0.33 %, and at 28 kVp/70 mAs, the Difference(%) of dose was 0.01 %~0.16 %, both of which showed results within 2%, the effective difference range. Therefore, this study found out that calculation of the absorbed dose using Geant4 Simulation is useful in measuring the absorbed dose in the breast tissue for mammography.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2021.11a
• /
• pp.263-266
• /
• 2021

GPU 상에서의 효율적인 암호 구현을 위해서는 GPU 내부의 자원인 메모리와 명령어셋을 구현하고자 하는 암호 구조에 맞추어 사용하는 것이 중요하다. 본 논문에서는 Blowfish와 RC4를 최신 GPU 프로세서 상에서 최적 구현해 보고 성능을 저하시키는 요인들과 향상시키는 요인들을 비교 분석한다. 특히 파일암호화와 패스워드 크래킹에서 발생하는 암호화 구현 고려 사항에 대해 확인하며 해당 특징이 GPU 암호 구현 상에서 미치는 영향에 대해 확인해 보도록 한다. 마지막으로 앞에서 구현한 결과물의 성능을 저하시키는 요소에 대한 분석을 기반으로하여 높은 GPU 내성을 가지는 암호 설계를 위해 필요한 구조에 대해 확인해 보도록 한다.

• Journal of the Korean Geosynthetics Society
• /
• v.13 no.4
• /
• pp.21-31
• /
• 2014

Recently, the research on renewable energy against depletion of fossil fuel have been actively carried out in the world. Especially, offshore wind turbines are very economical and innovative technology. However, offshore wind turbines experience large base moments due to the wind and wave loading, so the monopile with large diameter needs to be applied. For the economical design of the large diameter pile, it is important to consider the flexibility of the foundation to estimate the maximum moment accurately, based on studies conducted so far. In this paper, the foundation was modeled using the finite element method in order to better describe the large diameter effect of a monopile and the results were compared with those of p-y method. For the examples studied in this paper, the change in maximum moment was insignificant, but the maximum tilt angle from the finite element method was over 14% larger than that of p-y method. Therefore, the finite element approach is recommended to model the flexibility effect of the pile when large tilt angles may cause serviceability issues.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.9
• /
• pp.50-56
• /
• 2008

In this paper, we propose a partial access mechanism for low cost multimedia processors. Due to the cost increase of adding the SIMD register files and the execution blocks, we experience difficulties applying the SIMD instructions to low cost multimedia embedded processors. The proposed mechanism has the advantages of decreasing the cost burden of the additional hardware and enhancing total performance of the SIMD operation. We designed the ASIP in which the mechanism is applied and compared the latency of the SIMD operation regarding the use of instruction sets in the DSP benchmark. Then, we analyzed the total performance enhancement and the reduction in area burden by synthesizing the ASIP using 0.25um TSMC CMOS technology. As a result, there are approximately a 38% of performance increase and a 13.4% of area increase according to the proposed mechanism simulation.