• 한국태양에너지학회:학술대회논문집
• /
• 2008.04a
• /
• pp.104-110
• /
• 2008

This paper presents demonstration study results derived through field testing of a part load solar energized cooling system for the library of a cultural center building located in Gwangju, Korea. First operating demonstration system was set up in Gwangju in 2005. These system comprises the $200m^2$ evacuated tubular solar collector, a $6m^3$ heat storage tank. In a 2006, daily average of insolation showed about $506W/m^2$, the solar collector efficiency was 44%. In a 2007, daily average of insolation showed about$507W/m^2$, the solar collector efficiency was 42%. As a result, evacuated tubular solar collector kept the high efficiency for two years.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.5C
• /
• pp.500-505
• /
• 2002

In this paper, a novel architecture of programmable divider with fifty percent duty cycle output and programmable dividing number has been proposed. Through HSPICE simulation, a 900MHz frequency synthesizer with proposed frequency divider has designed in a standard 0.25$\mu\textrm{m}$ CMOS technology. To verify the operation of proposed frequency divider, a chip had been fabricated using 0.65$\mu\textrm{m}$ 2-poly, 3-metal standard CMOS processing and experimental result shows that the proposed frequency divider works well. The designed voltage controlled oscillator(VCO) has a center frequency of 900MHz, a tuning range of ${\pm}$10%, and a gain of 154MHz/V. The simulated frequency synthesizer performance has a settling time of 1.5${\mu}\textrm{s}$, a frequency range from 820MHz to 1GHz and power consumption of 70mW at 2.5V power supply voltage.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.29 no.4
• /
• pp.91-99
• /
• 2001

This study was carried out to investigate the effects of mowing height, rolling, N-fertilizing, and season on green speed(i.e., ball-roll distance) for developing and implementing a program of increasing green speed in Korean golf courses. Data were subjected to multi-regression analysis using SPSSWIN(Statistical Package for the Social Science), which collected from Yong-Pyong golf course greens selected to investigate. The results was as follows. 1) The multi-regression analysis of mowing height, rolling times, and N-fertilizer application rates on spring green speed was as follows; $Y_1$(spring green speed)=4.287+0.155X$_1$(rolling times)-0.131X$_2$(the amount of N-fertilizing)-0.251X$_3$(mowing height). 2) The multi-regression analysis of mowing height, rolling times, and N-fertilizer application rates on summer green speed was as follows; $Y_2$(summer green speed)=4.833-0.423X$_3$(mowing height)+0.146X$_1$(rolling times)-0.107X$_2$(the amount of N-fertilizing). 3) The multi-regression analysis of mowing height, rolling times, and N-fertilizer application rates on fall green speed was as follows; $Y_3$(fall green speed)=4.651-0.383X$_3$(mowing height)+0.142X$_1$(rolling times)-0.103X$_2$(the amount of N-fertilizing). 4) As mowing height was lowered by 1mm, green speed increased by 0.251~0.423m. As rolling times increased by 1(one), green speed increased by0.142~0.15m. As the amount of N-fertilizing increased by 1g/$m^2$, green speed decreased by 0.103~0.131m. The season also affected green speed. In comparison with spring green speed, summer green speed decreased by 0.145m and fall green speed decreased by 0.144m.

• Journal of Korea Society of Industrial Information Systems
• /
• v.8 no.3
• /
• pp.85-90
• /
• 2003

This paper proposes a modular multiplier based on LFSR (Linear Feedback Shift Register) architecture with efficient area complexity over GF(2/sup m/). At first, we examine the modular exponentiation algorithm and propose it's architecture, which is basic module for public-key cryptosystems. Furthermore, this paper proposes on efficient modular multiplier as a basic architecture for the modular exponentiation. The multiplier uses AOP (All One Polynomial) as an irreducible polynomial, which has the properties of all coefficients with '1 ' and has a more efficient hardware complexity compared to existing architectures.

• Journal of Korea Society of Industrial Information Systems
• /
• v.9 no.1
• /
• pp.43-48
• /
• 2004

This paper presents new architectures based on the linear feedback shia resister architecture over GF(2m). First we design a modular multiplier and a modular squarer, then propose an architecture by combing the multiplier and the squarer. All architectures use an irreducible AOP (All One Polynomial) as a modulus, which has the properties of all coefficients with '1'. The proposed architectures have lower hardware complexity than previous architectures. They could be. Therefore it is useful for implementing the exponentiation architecture, which is the con operation in public-key cryptosystems.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.12C
• /
• pp.1288-1298
• /
• 2002

To implement elliptic curve cryptosystem in GF(2$\^$m/) at high speed, a fast divider is required. Although bit-parallel architecture is well suited for high speed division operations, elliptic curve cryptosystem requires large m(at least 163) to support a sufficient security. In other words, since the bit-parallel architecture has an area complexity of 0(m$\^$m/), it is not suited for this application. In this paper, we propose a new serial-in serial-out systolic array for computing division operations in GF(2$\^$m/) using the standard basis representation. Based on a modified version of tile binary extended greatest common divisor algorithm, we obtain a new data dependence graph and design an efficient bit-serial systolic divider. The proposed divider has 0(m) time complexity and 0(m) area complexity. If input data come in continuously, the proposed divider can produce division results at a rate of one per m clock cycles, after an initial delay of 5m-2 cycles. Analysis shows that the proposed divider provides a significant reduction in both chip area and computational delay time compared to previously proposed systolic dividers with the same I/O format. Since the proposed divider can perform division operations at high speed with the reduced chip area, it is well suited for division circuit of elliptic curve cryptosystem. Furthermore, since the proposed architecture does not restrict the choice of irreducible polynomial, and has a unidirectional data flow and regularity, it provides a high flexibility and scalability with respect to the field size m.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.38 no.3
• /
• pp.33-40
• /
• 2010

Many trails have been built and utilized in each sub-basin of Apsan Park. This study focused on the conditions and the present flora of several overused trails within three basins called Kun-Gol, Anjiroung-Gol, and Meaja-Gol in Apsan Park. There are two purposes for this study. The first is to make a plan for restoration by classifying the type of damage to these overused trails. The second is to provide preliminary data for reestablishing a more pleasant urban nature park. As a result of the survey, the average length of these trails is 9.0km and mean width is 2.0 to 2.6m. 2,108m of the sections studied(23.4% of the total) had exposed root, 3,199m of the sections studied (35.5% of the total) had exposed rock, 3,270m of the sections studied(36.6% of the total) displayed damaged pathways, and 4,841m of the sections studied (53.8% of the total) had higher soil hardness. Eighty-three areas of deterioration were found and there has been extensive property destruction. As an indication of human disturbances, the Naturalization Index and Urbanization Index appeared as: Kun-Gol, 7.0%, 5.5%; Anjiroung-Gol, 8.3%, 4.5%; Meaja-Gol 8.6%, 6.2%; in total, 7.8%, 8.3%. As a method of checking the level and extent of the damage process, an impact rating classification was used at each point on the trails. Kun-Gol had the highest rating and Anjiroung-Gol had the lowest rating in impact rating classification. With the impact rating classification, it was found that each trail would continue to worsen, meaning that roots and rocks are more likely to be further exposed and the trail width will continue to widen through overuse. An actual plan for reparations and restoration of the trails is needed through further study.

• Geomechanics and Engineering
• /
• v.37 no.1
• /
• pp.49-64
• /
• 2024

Rocks undergoing repeated loading and unloading over an extended period, such as due to earthquakes, human excavation, and blasting, may result in the gradual accumulation of stress and deformation within the rock mass, eventually reaching an unstable state. In this study, a CNN-CCM is proposed to address the mechanical behavior. The structure and hyperparameters of CNN-CCM include Conv2D layers × 5; Max pooling2D layers × 4; Dense layers × 4; learning rate=0.001; Epoch=50; Batch size=64; Dropout=0.5. Training and validation data for deep learning include 71 rock samples and 122,152 data points. The AI Rock Constitutive Model learned by CNN-CCM can predict strain values(ε₁) using Mass (M), Axial stress (σ₁), Density (ρ), Cyclic number (N), Confining pressure (σ₃), and Young's modulus (E). Five evaluation indicators R², MAPE, RMSE, MSE, and MAE yield respective values of 0.929, 16.44%, 0.954, 0.913, and 0.542, illustrating good predictive performance and generalization ability of model. Finally, interpreting the AI Rock Constitutive Model using the SHAP explaining method reveals that feature importance follows the order N > M > σ₁ > E > ρ > σ₃.Positive SHAP values indicate positive effects on predicting strain ε₁ for N, M, σ₁, and σ₃, while negative SHAP values have negative effects. For E, a positive value has a negative effect on predicting strain ε₁, consistent with the influence patterns of conventional physical rock constitutive equations. The present study offers a novel approach to the investigation of the mechanical constitutive model of rocks under cyclic loading and unloading conditions.

• Korean Journal of Environment and Ecology
• /
• v.28 no.1
• /
• pp.45-54
• /
• 2014

This study was carried out to investigate the ecological succession sere and conservative value, and to provide the basic data in Woonsooam Valley, in Jogyesan (Mt.) (altitude 884m), Suncheon City, Korea by analysing the structure of the plant community. Fifteen plots (size is $20m{\times}20m$) were set up at an altitude of range from 255m to 495m. As a result of analysis of DCA which is one of the ordination technique, the plant communities were divided into five groups which are community I (Pinus densiflora community), community II (Quercus variabilis-Quercus serrata community), community III (Q. serrata-Q. variabilis community), and community IV (Carpinus tschonoskii-Q. serrata community) and community v(Deciduous broad-leaved forest community). We found out that the vegetation of the study site located in the South Temperate Climate Zone. The study site is found out that Q. serrata community 34.4%, part of slope in valley is the distribution that dominant species is Q. serrata-Q. variabilis community 32.1%. And in valley showed Carpinus tschonoskii community 5.5%. And Sasa borealis was dominant species in the shrub layer. We couldn't supposed that the ecological succession sere of the study site, however we should do a long-term monitoring to investigate the changes of the ecological succession each plant community, According to the index of Shannon's diversity (unit: $400m^2$), community III was ranged from 1.0102 to 1.1013, community V was 0.9945, community II was ranged from 0.7913 to 1.1503, community IV was ranged from 0.8081 to 1.0749 and community I was 0.9273.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.39 no.4
• /
• pp.18-27
• /
• 2011

Recently, the location of urban parks has become more important in terms of the construction of an environment-friendly, sustainable city. To build a refined and desirable urban park, it is necessary to have precise understanding on the evaluation of supply adequacy and selection method for its location. However, there have been few studies on the spatial imbalance and location plan of urban parks. Therefore, this study has attempted to evaluate the spatial imbalance of urban parks in Hwanggeum-dong, Suseong-gu in Daegu and propose a policy suggestion to solve the imbalance. According to the analysis, Hwanggeum 1-dong and 2-dong recorded 943.08$m^2$/GRID and 380.61$m^2$/GRID, respectively, in terms of legal requirements for urban parks and 406,730.80$m^2$ and 157,086.40$m^2$ in terms of total service supply from two neighborhood parks and four children's parks. According to the evaluation of optimal supply area across Hwanggeum-dong, Hwanggeum 1-dong and 2-dong recorded 12.3% and 51.5%, respectively. In an evaluation of the supply adequacy of urban parks, the areas described as 'very satisfying' were 20.5% and 5.4% in Hwanggeum 1-dong and 2-dong, respectively. On the contrary, the areas described as 'very dissatisfying' accounted for 27.6% and 10.8%, respectively, in the two regions. It appears that additional parks should be developed in the inferior areas in terms of urban parks in consideration of various factors such as area and shape. The results of the supply adequacy evaluation will be used as a tool to figure out and solve problems in the location of urban parks and as basic data for a master plan to build an environment-friendly, sustainable city.