• Title/Summary/Keyword: M2M통신

Search Result 2,520, Processing Time 0.039 seconds

Edge to Edge Model and Delay Performance Evaluation for Autonomous Driving (자율 주행을 위한 Edge to Edge 모델 및 지연 성능 평가)

  • Cho, Moon Ki;Bae, Kyoung Yul
    • Journal of Intelligence and Information Systems
    • /
    • v.27 no.1
    • /
    • pp.191-207
    • /
    • 2021
  • Up to this day, mobile communications have evolved rapidly over the decades, mainly focusing on speed-up to meet the growing data demands of 2G to 5G. And with the start of the 5G era, efforts are being made to provide such various services to customers, as IoT, V2X, robots, artificial intelligence, augmented virtual reality, and smart cities, which are expected to change the environment of our lives and industries as a whole. In a bid to provide those services, on top of high speed data, reduced latency and reliability are critical for real-time services. Thus, 5G has paved the way for service delivery through maximum speed of 20Gbps, a delay of 1ms, and a connecting device of 106/㎢ In particular, in intelligent traffic control systems and services using various vehicle-based Vehicle to X (V2X), such as traffic control, in addition to high-speed data speed, reduction of delay and reliability for real-time services are very important. 5G communication uses high frequencies of 3.5Ghz and 28Ghz. These high-frequency waves can go with high-speed thanks to their straightness while their short wavelength and small diffraction angle limit their reach to distance and prevent them from penetrating walls, causing restrictions on their use indoors. Therefore, under existing networks it's difficult to overcome these constraints. The underlying centralized SDN also has a limited capability in offering delay-sensitive services because communication with many nodes creates overload in its processing. Basically, SDN, which means a structure that separates signals from the control plane from packets in the data plane, requires control of the delay-related tree structure available in the event of an emergency during autonomous driving. In these scenarios, the network architecture that handles in-vehicle information is a major variable of delay. Since SDNs in general centralized structures are difficult to meet the desired delay level, studies on the optimal size of SDNs for information processing should be conducted. Thus, SDNs need to be separated on a certain scale and construct a new type of network, which can efficiently respond to dynamically changing traffic and provide high-quality, flexible services. Moreover, the structure of these networks is closely related to ultra-low latency, high confidence, and hyper-connectivity and should be based on a new form of split SDN rather than an existing centralized SDN structure, even in the case of the worst condition. And in these SDN structural networks, where automobiles pass through small 5G cells very quickly, the information change cycle, round trip delay (RTD), and the data processing time of SDN are highly correlated with the delay. Of these, RDT is not a significant factor because it has sufficient speed and less than 1 ms of delay, but the information change cycle and data processing time of SDN are factors that greatly affect the delay. Especially, in an emergency of self-driving environment linked to an ITS(Intelligent Traffic System) that requires low latency and high reliability, information should be transmitted and processed very quickly. That is a case in point where delay plays a very sensitive role. In this paper, we study the SDN architecture in emergencies during autonomous driving and conduct analysis through simulation of the correlation with the cell layer in which the vehicle should request relevant information according to the information flow. For simulation: As the Data Rate of 5G is high enough, we can assume the information for neighbor vehicle support to the car without errors. Furthermore, we assumed 5G small cells within 50 ~ 250 m in cell radius, and the maximum speed of the vehicle was considered as a 30km ~ 200 km/hour in order to examine the network architecture to minimize the delay.

Adhesion Layer 사용으로 인한 Si Thin Film Anode 전극의 신뢰성 향상

  • O, Min-Seop;Song, Yeong-Hak;U, Chang-Su;Jeong, Jun-Ho;Hyeon, Seung-Min;Lee, Hu-Jeong
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2013.02a
    • /
    • pp.681-682
    • /
    • 2013
  • 전기는 우리 주변의 에너지 형태 중에서 가장 편리하고 광범위하게 사용되고 있다. 이러한 전기는 전자제품, 전기자동차, 에너지 저장 플랜트 등 매우 많은 분야에서 저장되고 사용되고 있다. 특히 에너지 저장 용량의 확대는 휴대폰, 노트북 PC 등 휴대용 IT 기기의 성장에 결정적인 역할을 하였다. 가볍고 작으면서도 고용량의 전기 에너지 저장 장치가 없었다면, 통신이나 인터넷 그리고 오락 등 다양한 기능을 작은 휴대용 기기에 구현할 수 없었을 것이다. 그러나 시간이 흐를수록 기기의 요구 성능이 높아지고 소비자의 니즈가 더욱더 다양해지고 고도화될수록 단일 부품으로 가장 큰 부피를 차지하는 에너지 저장 장치의 용량과 디자인은 점점 중요해지고 있다. 이러한 에너지 저장 장치에서 가장 친숙한 형태는 2차 전지 계열이다. 납 축전지를 비롯하여, 니켈수소, 니켈카드뮴, electrochemical capacitor와 Li ion 계열 등이 대표적이다. 특히 Li ion 배터리는 모바일, 자동차 및 에너지 저장 그리드 등과 같은 다양한 분야에 가장 많이 적용되고있다. Li ion 배터리에 대하여 현재의 핵심적인 연구분야는 전극 재료(cathode, anode)와 electrolyte에 대한 것이다. Anode 전극 재료 중에서 가장 많이 사용되는 재료는 카본을 기반으로 하는 재료로 안정성에 대한 장점이 있지만 에너지 밀도가 낮다는 단점이 있다. 에너지 저장 용량 증가에 대한 필요성이 증가하기 때문에 현재 많이 사용되고 있는 에너지 밀도가 낮은 카본 재료를 대체하기 위해서 이론 용량이 높다고 알려진 실리콘과 같은 메탈이나 주석 산화물과 같은 천이 금속 산화물에 대하여 많은 연구가 진행되고 있다. 특히 현재까지 알려진 많은 재료 중에서 가장 큰 capacity (~4,000 mAh/g)를 가지고 있다고 알려진 실리콘이 카본의 대체 재료로 많은 연구가 진행되고 있다. 그러나, Li 과 반응을 하며 약 300~400%에 달하는 부피팽창이 발생하고, 이러한 부피 팽창 때문에 충 방전이 진행됨에 따라 current collector로부터 박리되는 현상을 보여 빠른 용량 감소를 보여주고 있다. 본 연구에서는 adhesion layer를 current collector와 실리콘 전극 재료 사이에 삽입하여 충 방전 시 부피팽창에 의한 미세구조의 변화와 electrochemical 특성에 대한 영향을 알아보았다. 실험에 사용한 anode 전극은 상용 Cu foil current collector에 RF/DC magnetron 스퍼터링을 통해 다양한 종류(Ti, Ta 등)의 adhesion layer과 200 nm 두께의 Si 박막을 증착하였다. 또한 Bio-logic Potentiostat/ Galvanostat VMP3 와 WanAtech automatic battery cycler 장비를 사용하여 0.2 C-rate로 half-cell 타입의 코인 셀로 조립한 전극에 대한 충 방전 실험을 진행하였다. Adhesion layer의 사용으로 인해 실리콘 박막과 Cu current collector 사이의 박리 현상을 줄여줄 수 있었고, 충 방전 시 Cu 원자의 실리콘 박막으로의 확산을 통한 brittle한 Cu-Si alloy 형성을 막아 줄 수 있어 큰 특성 향상을 확인할 수 있었다. 또한, 리튬과 실리콘의 반응을 통한 형태와 미세구조 변화를 SEM, TEM 등의 다양한 장비를 사용하여 확인하였고, 이를 통해 adhesion layer의 사용이 전극의 특성향상에 큰 영향을 끼쳤다는 것을 확인할 수 있었다.

  • PDF

Design of V-Band Waveguide Slot Sub-Array Antenna for Wireless Communication Back-haul (무선통신 백-홀용 V-밴드 도파관 슬롯 서브-배열 안테나의 설계)

  • Noh, Kwang-Hyun;Kang, Young-Jin
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.17 no.7
    • /
    • pp.334-341
    • /
    • 2016
  • In this paper, the study of a waveguide aperture-coupled feed-structured antenna has been conducted for the purpose of applying it to a wireless back-haul system sufficient for high-capacity gigabits-per-second data rates. For this study, a $32{\times}32$ waveguide slot sub-array antenna with a corporate-feed structure was designed and produced. Also, this antenna is used at 57 GHz to 66 GHz in the V-band. The construction of the antenna is a laminated form with radiating parts (outer groove and slot, cavity), a coupled aperture, and feeds in each. The antenna was designed with HFSS, which is based on 3D-FEM, produced with aluminum processed by a precision-controlled milling machine, and assembled after a silver-plating process. The measurement result from analysis of the characteristics of the antenna shows that return loss is less than -12 dB, VSWR < 2.0, and a wide bandwidth ranges up to 16%. An overall first side lobe level is less than -12.3 dB, and a 3 dB beam width is narrow at about $1.85^{\circ}$. Also, antenna gain is 38.5 dBi, offering high efficiency exceeding 90%.

An FPGA Implementation of the Synthesis Filter for MPEG-1 Audio Layer III by a Distributed Arithmetic Lookup Table (분산산술연산방식을 이용한 MPEG-1 오디오 계층 3 합성필터의 FPGA 군현)

  • Koh Sung-Shik;Choi Hyun-Yong;Kim Jong-Bin;Ku Dae-Sung
    • The Journal of the Acoustical Society of Korea
    • /
    • v.23 no.8
    • /
    • pp.554-561
    • /
    • 2004
  • As the technologies of semiconductor and multimedia communication have been improved. the high-quality video and the multi-channel audio have been highlighted. MPEG Audio Layer 3 decoder has been implemented as a Processor using a standard. Since the synthesis filter of MPEG-1 Audio Layer 3 decoder requires the most outstanding operation in the entire decoder. the synthesis filter that can reduce the amount of operation is needed for the design of the high-speed processor. Therefore, in this paper, the synthesis filter. the most important part of MPEG Audio, is materialized in FPGA using the method of DAULT (distributed arithemetic look-up table). For the design of high-speed synthesis filter, the DAULT method is used instead of a multiplier and a Pipeline structure is used. The Performance improvement by 30% is obtained by additionally making the result of multiplication of data with cosine function into the table. All hardware design of this Paper are described using VHDL (VHIC Hardware Description Language) Active-HDL 6.1 of ALDEC is used for VHDL simulation and Synplify Pro 7.2V is used for Model-sim and synthesis. The corresponding library is materialized by XC4013E and XC4020EX. XC4052XL of XILINX and XACT M1.4 is used for P&R tool. The materialized processor operates from 20MHz to 70MHz.

Evaluation of Car Prototype using CAVE-like Systems (케이브 기반 자동차 시제품 평가)

  • 고희동;안희갑;김진욱;김종국;송재복;어홍준;윤명환;우인수;박연동
    • Science of Emotion and Sensibility
    • /
    • v.5 no.4
    • /
    • pp.77-84
    • /
    • 2002
  • In this paper, we propose the NAVER, a general framework for multipurpose virtual environments, and introduce the case study of evaluating car prototypes using cave-like systems. As a framework to implement variant applications in virtual environment, NAVER is extensible, reconfigurable and scalable. NAVER consists of several external modules (Render Server, Control Server and Device Server), which communicate each other to share states and user-provided data and to perform their own functions. NAVER supports its own scripting language based on XML which allows a user to define variant interactions between objects in virtual environments as well as describe the scenario of an application. We used NAVER to implement the system for evaluating car prototyes in a CAVE-like virtual environment system. The CAVE-like virtual environment system at KIST consists three side screens and a floor screen (each of them is a square with side of 2.2m), four CRT projectors displays stereoscopic images to the screens, a haptic armmaster, and a 5.1 channel sound system. The system can provide a sense of reality by displaying auditory and tactile senses as well as visual images at the same time. We evaluate car prototypes in a CAVE-like system in which a user can observe, touch and manipulate the virtual installation of car interior.

  • PDF

Evaluation of Intensity of Extremely Low Frequency Magnetic Fields (ELF-MF) Inside of Cabins as Generated During Subway Operation (지하철 운행 중 발생하는 객차 내부 극저주파 자기장(ELF-MF) 세기 평가)

  • Lee, Jihyun;Kang, Myeongji;Park, Yunkyung;Park, Donguk;Choi, Sangjun
    • Journal of Korean Society of Occupational and Environmental Hygiene
    • /
    • v.29 no.2
    • /
    • pp.185-194
    • /
    • 2019
  • Objective: This study was conducted to investigate the intensity of the extremely low frequency magnetic fields(ELF-MF) generated inside of the cabins during subway operation. Methods: The ELF-MF intensity were investigated on 30 subway lines in Korea, including in the Greater Seoul Metropolitan Area(Seoul and Gyeonggi-do Province), Incheon, Busan, Daegu, Daejeon, and Gwangju. ELF-MF intensity was measured at 0.9 m from the floor using EMDEX II meters with a resolution of $0.01{\mu}T$. All data were collected every three seconds and analyzed with EMCALC 2013 version 3.0B software. Basic characteristics of subway operation, including alternative current(AC) or direct current(DC), voltage level, and opening year of the line were investigated. Real-time information during measurement, such as the time of departure, moving and arrival of trains, were also recorded. Results: The arithmetic mean(AM) and maximum(Max) intensity of ELF-MF were $0.62{\mu}T$ and $11.51{\mu}T$, respectively. Compared by region, the ELF-MF intensity measured inside cabin were the highest in the Seoul Metropolitan Area($AM=0.80{\mu}T$), followed by Busan($AM=0.30{\mu}T$), Daegu($AM=0.29{\mu}T$), Incheon($AM=0.14{\mu}T$), Gwangju($AM=0.04{\mu}T$) and Daejeon($AM=0.03{\mu}T$). The average ELF-MF level measured in AC trains($AM=1.36{\mu}T$) was also significantly higher than in DC trains($AM=0.28{\mu}T$). In terms of the opening year of the subway, trains opened before 1990($AM=0.85{\mu}T$) was the highest and the lowest was 2000-2009($AM=0.24{\mu}T$). Conclusions: The AC supply has the greatest influence on the generation of the ELF-MF intensity in subway cabins.

A Study on Market Expansion Strategy via Two-Stage Customer Pre-segmentation Based on Customer Innovativeness and Value Orientation (고객혁신성과 가치지향성 기반의 2단계 사전 고객세분화를 통한 시장 확산 전략)

  • Heo, Tae-Young;Yoo, Young-Sang;Kim, Young-Myoung
    • Journal of Korea Technology Innovation Society
    • /
    • v.10 no.1
    • /
    • pp.73-97
    • /
    • 2007
  • R&D into future technologies should be conducted in conjunction with technological innovation strategies that are linked to corporate survival within a framework of information and knowledge-based competitiveness. As such, future technology strategies should be ensured through open R&D organizations. The development of future technologies should not be conducted simply on the basis of future forecasts, but should take into account customer needs in advance and reflect them in the development of the future technologies or services. This research aims to select as segmentation variables the customers' attitude towards accepting future telecommunication technologies and their value orientation in their everyday life, as these factors wilt have the greatest effect on the demand for future telecommunication services and thus segment the future telecom service market. Likewise, such research seeks to segment the market from the stage of technology R&D activities and employ the results to formulate technology development strategies. Based on the customer attitude towards accepting new technologies, two groups were induced, and a hierarchical customer segmentation model was provided to conduct secondary segmentation of the two groups on the basis of their respective customer value orientation. A survey was conducted in June 2006 on 800 consumers aged 15 to 69, residing in Seoul and five other major South Korean cities, through one-on-one interviews. The samples were divided into two sub-groups according to their level of acceptance of new technology; a sub-group demonstrating a high level of technology acceptance (39.4%) and another sub-group with a comparatively lower level of technology acceptance (60.6%). These two sub-groups were further divided each into 5 smaller sub-groups (10 total smaller sub-groups) through two rounds of segmentation. The ten sub-groups were then analyzed in their detailed characteristics, including general demographic characteristics, usage patterns in existing telecom services such as mobile service, broadband internet and wireless internet and the status of ownership of a computing or information device and the desire or intention to purchase one. Through these steps, we were able to statistically prove that each of these 10 sub-groups responded to telecom services as independent markets. We found that each segmented group responds as an independent individual market. Through correspondence analysis, the target segmentation groups were positioned in such a way as to facilitate the entry of future telecommunication services into the market, as well as their diffusion and transferability.

  • PDF

The Analysis of Theses Content Related to Parents' Needs for Their Education (부모교육 요구조사 관련 논문 내용 분석)

  • Kim, Jong-Han
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.12 no.5
    • /
    • pp.2115-2123
    • /
    • 2011
  • The purpose of this study is to draw a general conclusion through summing up theses on parents' need for their education up to the present. The subjects of this study are 25 masters' degree theses on parents' need for their education in the kindergarten from 2001 to 2010. The results of data on parents' education method and style were conducted by frequency analysis. Also it was surveyed if in how many theses the contents of parents' education were rated over average points by Licker. The results of this study are as follows: First, the parents think that the proper frequency of their education is once or two in a semester and the favorite time is from 10 to 12 o'clock or from 2 p. m. to 4 p.m. They also want to learn on Wednesday, Friday and Saturday. And they want a professional as their lecturer the most and then a homeroom teacher. Secondly, in the survey of their education style they like more lecture or a short course than any other thing, and then they like home messenger, group council and so on. But especially they don't like the style of visiting class, book lending, ceremony/class assistance, practice (workshop), and visiting home. Thirdly, they want to know a general guide in the kindergarten of the contents of their education a lot. And they want to know some of a budget, program, and assessment of a principal and the teachers in the kindergarten. Fourthly, they want to know all parts of the parents' roles related to rearing their children in their own elements of the contents of their education above all. And they also want strongly their free time, hobby, the liberal arts, amusement and recreation. Fifthly, in the view of infant development they want strongly to know how to communicate with their children rightly, and how to adjust their children's activities and how to praise or blame their children. And they also want how to form their children's right habit and to guide their children's right acts in the infant period the most. Lastly, they want to know children's physical development and their cognitive development in the view of infant development the most. And then they want to know the development of sociology, creativity, morality, and emotion in good order.

Manufacturing Industries and Policy Agenda of Goryeong County (고령군 제조업의 실태와 정책과제)

  • Lee, Chul-Woo
    • Journal of the Korean association of regional geographers
    • /
    • v.14 no.4
    • /
    • pp.290-308
    • /
    • 2008
  • The industrial development of Goryeong County was started by the operation of the Ssangrym Agro¬industrial complex in the 1980s. As of 2m3, there are 6 industrial complexes in Goryeong County which account for 80 percent of total employment and 67 percent of total production outPuts in local manufacturing. The local manufacturing industries grew steadily before the 1997 financial crisis which resulted in industrial decline and have shown again a growing tendency since 2000. In this period of growth, manufacturing outPuts are increased and the industrial structure are improved, while employment and value added are in stagnation. The major industrial agglomerations are based in Gaejin-Myun, Dasan-Myun and Ssangrym-Myun, all of which are those in which the agro-industrial complex is operated. More than half of local manufacturing finns are those which came to move in from other regions, looking for cheap labour forces, agglomeration of the related finns and the easy accessibility to transport and communication. However, such local advantages are increasingly losing due to the shortage of labour forces and the lack of industrial networks. Some policy agendas can be suggested as follows. First of all, industrial policy should attempt links with the building-up of the Daegu Technopolis and the up-grading of the local industrial structure towards the knowledge-based industries. Secondly, the local government should make efforts to establish the innovation supporting system for local firms and the industrial and residential basis.

  • PDF

An Empirical Study on Evaluation Factors of Cabin Service Quality of Airlines (항공사 객실서비스의 품질 평가요인에 관한 실증 연구 - MIAT 몽골항공사를 중심으로 -)

  • Hyun, Kil-Nam;Batbold, Senderi;Byun, Ki-Hyo;Hurr, Hee-Young
    • Korean Business Review
    • /
    • v.19 no.2
    • /
    • pp.261-274
    • /
    • 2006
  • Airline business operates in the 21st century within fast changing market environment and fierce competition. Management of airline companies has faced the need for vast adaptation to new trends in the growth of world economy that are cardinal changes in marketing environment due to quick development of Internet and IT, transport price competition and, as a consequence, low profit margin, diversified customer wants and needs, lack of investment needed for new aircraft equipped with the latest high tech innovations, unpredictable oil price changes, and exchange rate fluctuations. This study is aimed to evaluate the quality performance of cabin service, to analyse, further, the issues that appeared to be the most significant among customers' answers to questionnaire, to explore the relationships between these issues and customer satisfaction, to highlight the essential questions to address, and to provide some practical suggestions. The five dimensions (such as tangible, reliability, responsiveness, assurance, and empathy) were adopted to examine the relationship between the service quality and customer satisfaction of Mongolian and non-Mongolian passengers travelling by the MIAT. According to findings of analysis made with use of the SERVPERF model, it can be concluded that Mongolian travellers' satisfaction was effected by 'Tangible' and 'Responsiveness' dimensions of service quality, whereas the 'Empathy' dimension has more impact on the satisfaction of non-Mongolian.

  • PDF