• Journal of Korean Society for Atmospheric Environment
• /
• v.24 no.4
• /
• pp.483-491
• /
• 2008

The filtration characteristics of $CYBAGFILTER^{(R)}$ unit with pleated filter bags were evaluated by comparing the performance of the unit with the lower part of cyclone shape with that of the unit with conventional lower part. Results from the test were also compared with those from the previous research with the $CYBAGFILTER^{(R)}$ in which round filter bags were installed. $CYBAGFILTER^{(R)}$ is the unit which combines the centrifugal separation mechanism and the fabric filtration mechanism in a single unit for efficient removal of particulate matters. The pleated filter bags are made of pleated fabric with an extension of the filtration area about 3 times compared with the conventional round filter bags. The results from the test using pleated filter bags showed an overall collection efficiency of over 99.9% regardless of the shape of lower part installed. When the lower part of cyclone shape was installed, the filter cleaning interval was over 2 times longer compared with that when the conventional lower part was installed. At the same conditions of filtration velocity and filter pressure drop, the $CYBAGFILTER^{(R)}$ with the lower part of cyclone shape, in which the pleated filter bags are installed, can be operated with a flow rate of round 3 times higher than that with conventional round filter bags.

• Fashion & Textile Research Journal
• /
• v.11 no.1
• /
• pp.130-139
• /
• 2009

This study was conducted to reproduce the Leg of Mutton Sleeve pattern of the ladies' costume of the 1890's for Korean women of the twenties who have the standard body type and the average size. Nineteen Leg of Mutton Sleeve patterns of the ladies' costume of the 1890's were collected and drawn to actual size. Nineteen Leg of Mutton Sleeve patterns of the ladies' costume of the 1890's were classified into three groups(S1~S3) by the pattern pieces and the bend of the lower part of the elbow line. The S1 was one-piece sleeve pattern and the lower part of the elbow line of S1 was not bent. The gathers volume of sleeve cap of S1 was smaller than S2 and S3. The S2 was one-piece sleeve pattern and the lower part of the elbow line of S2 was bent. The S2 pattern had typical characteristics of the Leg of Mutton Sleeve that the gathers volume of sleeve cap was large and the lower part of elbow line was tight. The S3 was two-piece sleeve pattern and the lower part of the elbow line of S3 was bent. The gathers volume of sleeve cap of S3 was similar with S2. The study patterns of three groups of the Leg of Mutton Sleeve which had the characteristics and the silhouette of the Leg of Mutton Sleeve pattern of the ladies' costume of the 1890's were designed like for Korean women of the twenties who have the standard body type and the average size through modifications based on the evaluation of dressing on two occasions. The study pattern of three groups of the Leg of Mutton Sleeve were evaluated to have the silhouette of the Leg of Mutton Sleeve of the 1890's and to fit Korean women of the twenties who have the standard body type and the average size with the sensory test.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.17 no.4
• /
• pp.602-607
• /
• 1993

Concept of the comfort and fitness becomes a major concern in the basic function of the ready-made clothes. This research was performed to classify and characterize Korean adult males anthropometrically. Sample size was 1290 subjects and their age range was from 19 to 54 years old. Sampling was carried out by the stratified sampling method. 75 variables in total were applied to classify the bodytypes. Data were analyzed by the multivariate method, especially factor and cluster analysis. The high factor loading items extracted by factor analysis were based to determine the variables of the cluster analysis for the similar bodytypes respectively. In the part of the lower body, 14 variables from the data were applied to classify the bodytypes of lower part by Ward's minimum variance method. The group fanning a cluster were subdivided into 5 sets by cross-tabulation extracted by the hierarchical cluster analysis. Type 3 and 4 in lower body were composed of the majority of 53.1% of the subjects. The Korean adult males had relatively well-balanced in lower body.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.20 no.1
• /
• pp.23-27
• /
• 2011

This study analyzes about the variation of pressure and stream velocity according to the movement of tail wing. The pressure at the front part of airplane becomes lower than at the rear part and the stream velocity has decreased by being bumped against the wing of airplane. The pressure at the front part of rudder becomes higher than at its rear part according to the movement of rudder among the tail wings of airplane. The more stream velocity becomes decreased, the more rudder spreads out. As the tail wing of airplane folds, the pressure at its front part becomes higher. And the pressure at its rear part becomes lower than at its front part. The more tail wing of airplane folds, the more stream velocity becomes decreased.

• Journal of architectural history
• /
• v.26 no.4
• /
• pp.45-54
• /
• 2017

This thesis mainly deals with the meaning of single eaves buildings which have Chunyeo with Sarae. As a rule, building with single eaves does not construct Sarae. But we can find some special buildings using Chunyeo with Sarae in the corners of the eaves. At this time, many people say that lower part of the member so called Alchunyeo, and upper part of the member so called Chunyeo. And they also say that the using of Alchunyeo was caused by the shortage of timber which can make Chunyeo properly. As a result, single eaves buildings using Chunyeo with Sarae in the corners of the eaves were not caused by the shortage of timber. That kinds of buildings were made by the hierarchy of building. Single eaves buildings with Sarae have lower rank than double eaves buildings, and also have higher rank than those without Sarae. And we have to say that lower part of the member is Chunyeo, and upper part of the member is Sarae.

• Journal of Korean Medicine for Obesity Research
• /
• v.5 no.1
• /
• pp.141-146
• /
• 2005

It is very important that the ratio of Soft Lean Mass and Body Fat Mass in body composition. Generally we make an effort not only weight reduction but body fat mass reduction, and finally percent body fat is reduced. And we make an effort to reduce of partial obesity. I have one case that improvement of imbalance on the upper and lower part of the body by Oriental Medicine. We have the result that the upper part of the body composition is increased and the lower part of the body composition is decreased.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.30 no.2
• /
• pp.165-173
• /
• 1985

The objectives of the study were to investigate the effects of foliage clipping on photosynthesis and grain filling for branch and non branch types under the polyethylene film mulch and non mulch conditions in mono cropping and second cropping after barley in sesame (Sesamum indicum L.), and to improve poor grain filling at later flowering time utilizing these data. One thousand grain weight was more decreased in branch type than in non branch type, in polyethylene film mulch condition than in non mulch condition, and in second cropping after barley than in mono cropping by clipping lower part foliage. Twentyfive percent clipping of lower part foliage showed a little increase than no clipping. Matured grain rate also showed same tendency between branch and non branch type and between mono cropping and second cropping after barley as well as 1,000 grain weight except for polyethylene film mulch. Matured grain rate of 25% foliage clipping at 30 days after flowering in non branch type presented a little increase but decreased in branch type. Clipping of higher part leaves were so serious decrease of matured grain rate that higher part leaves at late maturing time have a major role in photosynthesis. Matured grain rate of foliage clipping at 10 days after flowering was decreased in all treatments. Chlorophyll content of higher part leaves at 50% lower part foliage clipping presented 39% increase compared to same positioned leaves of non treatment, and 66% increase by 50% higher part foliage clipping in lower part leaves. Photosynthetic activity was 58% more increased in 50% lower part foliage clipping than no clipping, but seriously decreased in 50% higher part foliage clipping. Therfore, photosynthates of remained lower part leaves could not only support their own demands, but also any contribution to translocation of photosynthates from source to sink at late maturing time. Harvest index was 28% increased in 25% lower part foliage clipping and 13% decreased in 50% higher part foliage clipping compared to no clipping. Leaf area was 48% increased in 50% lower part foliage clipping compared to the same positioned leaves of no clipping, and only 5% increased in higher part foliage clipping. Productivity by foliage clipping compared to non treatment, was highly decreased in branch type than in non branch type, in second cropping after barley than in mono cropping. Little difference was detected between polyethylene film mulch and non mulch conditions. Twenty five percentage of lower part foliage clipping on mono cropping of non branch type appeared 5% and 8% yield increase in each of polyethylene film mulch and non mulch conditions compared to no clipping, and all decreased in other treatments. Mean loss of productivity by foliage clipping at 10 days after flowering was serious than clipping at 30 days after flowering. As the result, contribution to photosynthesis of source at 10 days after flowering are larger than that at 30 days after flowering in sesame. Fifty percent lower part foliage clipping at 10 days after flowering showed so the most serious yield decrease that lower part leaves at that time were considered as the main role leaves for photosynthesis.

• Journal of Korean Association for Spatial Structures
• /
• v.7 no.2 s.24
• /
• pp.63-74
• /
• 2007

Large spatial structures consist of roof structure and its supporting structure. Authors simply call the supporting structure "lower parts" and roof structure "upper parts". To study the influence of an lower part on the seismic response of the upper part of a structure as a first step, authors substitute the upper part and the lower part of the structure to a single degree of freedom system individually, and set up a new 2 DOF structural model connected by them. It is clarified that the mass ratio and the period ratio of an upper part to a lower part are important parameters to find the amplification or reduction of the seismic response of an upper part.

• The Journal of the Korea Contents Association
• /
• v.8 no.4
• /
• pp.92-99
• /
• 2008

Most of existing Ceramic bottle has a problem because of the entrance facing the upper, and then having the entrance exposed in the outside. This study has made up for this problem and manufactured a bottle having dual structure. This bottle contains the contents being poured, has the containing part having the entrance in the lower part, multiple connecting passage hole connected with the water containing part in the upper, and the storage part, keeping contents, located in the circumference of the water containing part. The tail end of the entrance of the water containing part is located more upper than the lower part of a storage part, being at the bottom. This bottle has a dual structure of which the entrance faces the lower part. So, because of checking a foreign substance to be inflowed, restraining the diffusion of an alcohol ingredient, it is possible to have the custody of products, having alcohol element, and other contents for a long time. And then, the water containing part, through the connecting hole, always can pour the contents of a certain level in a cup or bowl. Accordingly, the purpose of this study is to make a convenient, a practicable bottle with having settled problems of customary know-how explained previously.

• PNF and Movement
• /
• v.21 no.2
• /
• pp.265-272
• /
• 2023

Purpose: The purpose of this study was to investigate tactile sense perception of the lower extremities according to physical function in children with spastic cerebral palsy. Methods: This study was conducted on 15 children diagnosed with spastic cerebral palsy. Physical function measurement items included dynamic balance ability, gross motor function level, and lower extremity ankle spasticity. The lower extremity tactile sensation uses a monofilament to measure the sole of the first metatarsal head, the sole of the fifth metatarsal head, the heel, the anterior part of the shin midway between the patella and the ankle joint, the kneecap, the upper anterior iliac spine, and the knee. A total of six measurements were taken in the mid-femoral region of the bone. Spearman correlation analysis was performed to determine the degree of body function and lower extremity tactile perception. Results: As the physical function of children with spastic cerebral palsy deteriorated, there was a decrease in tactile sensation in the thigh area corresponding to the proximal lower extremity. (p <.05). Conclusion: Children with spastic cerebral palsy and poor physical function have sensory loss not only in the distal part but also in the proximal part, so a treatment approach that recognizes and improves it is necessary.