• Journal of architectural history
• /
• v.22 no.6
• /
• pp.7-22
• /
• 2013

The purpose of this paper is to study on the spatial characteristics from the "The Holy Trinity" fresco painted by Masaccio in the early Renaissance paintings. The results of this study are as follows. 1. The elevation composition of the "The Holy Trinity" fresco is divided into the upper and lower structure through horizontal axis on horizontal line around vanishing point. The upper structure is composed of vertical axis formed through the disposition of the "Trinity" elements and horizontal axis on horizontal line. The lower structure is composed of the sarcophagus and skeleton in such inside and the altar supported through circular columns of left and right. 2. The section composition of the "The Holy Trinity" fresco is composed of the ceiling structure of cylindrical-shaped vault on upper part around basic square floor plan that is interior space and upper structure. The exterior space and lower structure is placed with sarcophagus in inner part that altar and step is projected as same height and width in the outside direction. 3. The basic floor composition of the "The Holy Trinity" fresco is planned by square shape around structural columns that is placed at corners as symmetry through transverse, longitudinal and diagonal axis. The whole floor composition planned through the altar and step that is in exterior space at front, the apse of round form at rear part and the structure of the middle story concept at interior. 4. The visual aspect of the "The Holy Trinity" fresco is composed of the stable balance in relation with distance and height because the interior and exterior space as well as the upper structure and lower structure is formed by regular proportion system. The elevation angle of visual range was planned to view in detail generally or partially the architectural composition system and element, characters through proper visual distance, center and position.

• Imaging Science in Dentistry
• /
• v.46 no.1
• /
• pp.1-7
• /
• 2016

Purpose: This study assessed the accuracy of age estimates produced by a regression equation derived from lower third molar development in a Thai population. Materials and Methods: The first part of this study relied on measurements taken from panoramic radiographs of 614 Thai patients aged from 9 to 20. The stage of lower left and right third molar development was observed in each radiograph and a modified Gat score was assigned. Linear regression on this data produced the following equation: Y=9.309+1.673 mG+0.303S (Y=age; mG=modified Gat score; S=sex). In the second part of this study, the predictive accuracy of this equation was evaluated using data from a second set of panoramic radiographs (539 Thai subjects, 9 to 24 years old). Each subject's age was estimated using the above equation and compared against age calculated from a provided date of birth. Estimated and known age data were analyzed using the Pearson correlation coefficient and descriptive statistics. Results: Ages estimated from lower left and lower right third molar development stage were significantly correlated with the known ages (r=0.818, 0.808, respectively, $P{\leq}0.01$). 50% of age estimates in the second part of the study fell within a range of error of ${\pm}1year$, while 75% fell within a range of error of ${\pm}2years$. The study found that the equation tends to estimate age accurately when individuals are 9 to 20 years of age. Conclusion: The equation can be used for age estimation for Thai populations when the individuals are 9 to 20 years of age.

• Fashion & Textile Research Journal
• /
• v.21 no.1
• /
• pp.67-74
• /
• 2019

This study aims to investigate the relation between pressure, 3D length change, and subjective pressure sensation in sports brassieres. Seven Korean women in their 20s and 30s were chosen as subjects. In the experiment, the subjects evaluated four types of sports brassieres wherein the lower band was changed. The results of the study were as follows. The pressure according to the measurement position was lower at the front part than at the side and back parts (p<.05), and there was no difference in the pressure according to the brassiere type. It was observed that brassiere C, which had the higher extension band, was elongated more than the other brassieres when worn. In the case of brassiere B, which had a slit in the front center, it was observed that the 3D length of the front part changed very little as the slit spreads, and the back part stretched in a manner similar to those of the other brassieres. Subjective pressure sensation was statistically different only at the front and the side of the lower band. Brassiere B(with a silt) demonstrated the least subjective pressure sensation; the pressure sensation was high when wearing brassieres A and D (p<.05). Brassieres B and C were also preferred for overall comfort. In conclusion, it was observed that the substitution of material and morphological transformation affect subjective sensation.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2004.05a
• /
• pp.159-165
• /
• 2004

The shrinkages of injection molded parts are different in molding operational conditions and mold design. It also differs from resins. The shrinkages of injection molded parts for PBT (polybutylene terephthalate), PC (polycarbonate),and glass reinforced PBT and PC have been studied for various operational conditions of injection molding. The part shrinkage of crystalline polymer, PBT was higher than that of amorphous polymer, PC by about two times. The part shrinkages of both polymers decreased as glass fiber content increases. Higher Injection temperature and lower injection pressure resulted in a higher shrinkage in both PBT and PC resins. As mold temperature increases the part shrinkage of PC decreased. However, the part shrinkage of PBT increased as mold temperature increases. The part shrinkage of both PBT and PC resins decreased as gate size increases since the pressure delivery is mush easier for a larger gate size. The part shrinkage of flow direction was less than that of the perpendicular direction to the flow for both pure and glass fiber reinforced resins. The part shrinkage at the position close to the gate was less than that of the position far from the gate.

• Transactions of Materials Processing
• /
• v.13 no.6 s.70
• /
• pp.515-521
• /
• 2004

The shrinkages of injection molded parts are different in molding operational conditions and mold design. It also differs from resins. The shrinkages of injection molded parts fur PBT (polybutylene terephthalate), PC (polycarbonate), and glass reinforced PBT and PC have been studied for various operational conditions of injection molding. The part shrinkage of crystalline polymer, PBT was higher than that of amorphous polymer, PC by about two times. The part shrinkages of both polymers decreased as glass fiber content increases. Higher injection temperature and lower injection pressure resulted in a higher shrinkage in both PBT and PC resins. As mold temperature increases the part shrinkage of PC decreased. However, the part shrinkage of PBT increased as mold temperature increases. The part shrinkages of PBT and PC resins decreased as gate size increases since the pressure delivery is mush easier for a larger gate size. The part shrinkage of flow direction was less than that of the perpendicular direction to the flow for both pure and glass fiber reinforced resins. The part shrinkage at the position close to the gate was less than that of the position far from the gate.

• Journal of Environmental Science International
• /
• v.16 no.8
• /
• pp.897-906
• /
• 2007

Effect of seawater temperature (temperature) on the production of anchovy, Engraulis japonica and laver, Porphyra tenera Kjellman, were investigated in the eastern part of South Sea of Korea (ESS). Bimonthly temperature data (Feb., Apr., Jun., Aug., Oct., Dec.) from 1980 to 2002 were collected from Korean Oceanographic Data Center (KODC) and monthly anchovy catch and laver production from 1980 to 2002 were used from published sources by the Ministry of Maritime Affairs & Fisheries, Korea. Effects of temperature on the two organisms were examined in four cases. In case of lower anchovy catch and higher laver production (1993), temperature during main spawning season of anchovy was about $0.2-0.6^{\circ}C$ lower than normal condition, and temperature during seed collecting season of laver in Namhaedo, Kojedo went down below $22.0^{\circ}C$. In case of higher anchovy catch and higher laver production (1995), optimum temperature for catch was formed in main fishing ground, temperature for seed collection was lower than $22.0^{\circ}C$, In case of lower anchovy catch and lower laver production (1996), temperature for spawning and catch was about $0.6-1.6^{\circ}C$ lower than normal condition, and temperature during seed collection in nursery was about $0.5-1.0^{\circ}C$ higher than optimum temperature for seed collection. In case of higher anchovy catch and lower laver production (1998), temperature during main fishing and spawning season was about $1.0-1.8^{\circ}C$ higher than normal condition, and temperature during laver seed collection in nursery was $1.5^{\circ}C$ higher than optimum temperature for seed collection.

• Journal of Korean Physical Therapy Science
• /
• v.3 no.1
• /
• pp.871-879
• /
• 1996

The authors studied 74 patients with cal therapy Kosin University Medical March 1994 through February 1995. The results were, as follows: 1. Average age of the subject patients was 59.3 years old, their age ranged from 20 to 84 years old, and the incidence between male and female was 1:1.24 2. In respect to the economy level the middle class revealed the highest incidence, 40(54%) in 74cases. 3. The cause of injury revealed the highest incidence in hypertension 52 patients(72 %), more than all revealed the highest incidence 23 patients(44 %) in 60th years old. 4. The form of injury revealed the highest incidence in infarction 36 patients(49 %), more then all revealed the highest incidence 13 patients (36 %) in 60th years old. 5. As for the region cerebral artery of infarction patients, middle cerebral artery was the highest region of injury 72 %. 6. As for the physical paralysis side, the left side showed higher incidence 40 patients(54 %) compared to the right side 31 patients (42 %). 7. The period of therapy was 56 days, in average extending from 7 days to II months, nore then all there were the most numerous patients within 3 weeks 28 patients(38 %). 8. The upper side of the upper lims had improved 67 patients(91 %), the lower side 48(65 %). In the cases of the lower limb, the upper side had improved 70(95 %), the lower side 58(78 %). In short, patients had improved more the lower limb than the upper limb, the upper side(elbow and shoulder part) then the lower side(wrist and finger) of the upper limb. In the cases of the lower limb, patients had improved more the upper side (knee and hip part) then the lower side(foot and ankle) 9. In the cases of patients can be walking among subject patients 55(74 %) and patients cannot be walking 19 (26 %), In the cases of patients utilized assistant apparatus 34 (62 %) among self-walking, completely patients can be self-walking 21(28 %).

• Journal of Korea Foundry Society
• /
• v.28 no.6
• /
• pp.256-260
• /
• 2008

The Hybrid-Lower Arm, which has been developed for reducing cost and weight, was produced by three kinds of casting methods such as the high-pressure diecasting(HPDC), the squeeze casting(SC), and the H-NCM rheocasting process. The important factors for development of the Hybrid-Lower Arm are the integral feeding in Al casting for heat treatment and the high joinning ratio between the steel part and the Al part. In this study, effects of these casting processes on the quality of Hybrid-Lower Arm were investigated. Compared with HPDC and squeeze casting, the rheocasitng process using the H-NCM slurry had some advantages in joinning different materials of Al and steel pipe without deforming the steel pipe. X-ray analysis also showed the poreless microstructure in semisolid Hybrid-Lower Arm. In the torsion stress test, semisolid Hybrid-Lower Arm was satisfied with the requirements of automobile standard.

• Journal of Korean Medical classics
• /
• v.17 no.4
• /
• pp.37-56
• /
• 2004

In the Circular flow of Meridians(經脈), the circulation of Nutrient Gi(營氣) is that the essence Gi(精氣) of food starts from Middle Cho(中焦), via heart and lung into the ring-type round of 12 Meridians(十二經脈) in turn of hand Meridians(水經) and foot Meridians(足經), Yang Meridians(陽經) and Eum Meridians(陰經). The circulation of Defensive Gi(衛氣) is that if going out from Eum part(陰分) into Yang part(陽分), is rounding on the Yang Meridians, if going out from Yang part into Eum part, is rounding on the five Jang(五臟) in order of Kidney(腎)-Heart(心)-Lung(肺)-Liver(肝)-Spleen(脾). Because the process of accumulating the essence Gi has a property of One-way flow, it flows from terminal to the direction of body trunk, has no distinct channel with its immaterial nature. and is concentrated on the lower part to that the five Jang belong.

• Journal of Ginseng Research
• /
• v.12 no.2
• /
• pp.153-157
• /
• 1988

Ultrastructure of inside white part was compared with normal part in Korea Red ginseng by scanning electron microscope. The inside white part was in number and smaller inside of starch particle than those in the normal. The large membranous components in the inside white part seemed to be thinner than those in the normal. Thin membranous components may be related to lower protein content as previously reported. Starch particles in red ginseng were flat and amorphous.