• Journal of the Microelectronics and Packaging Society
• /
• v.9 no.3
• /
• pp.43-48
• /
• 2002

In this study, high performance electrode catalyst was developed in fabrication of membrane electrode assembly for PEMFCs(Polymer Electrolyte Membrane Fuel Cells). The I-V characteristics were measured to evaluate the influence of Nafion solution and Pt loading amount in the catalyst composition. The electrode characteristics were also investigated with respect to temperature change. The electrode performance was optimized at Nafion 5 wt% and 0.5 mg Pt/$\textrm{cm}^2$ content. The increase in the concentration of Nafion solution resulted in the decrease in electrode performance. At $80^{\circ}C$ of unit cell, I-V characteristics excelled those obtained at lower temperature. There was no difference in performance at low current density, but the improvement of voltage value in higher temperature could be found at high current density.

• Korean Journal of Environment and Ecology
• /
• v.29 no.1
• /
• pp.7-13
• /
• 2015

To examine the relationship between competition and environmental factors, the germlings of Ascophyllum nodosum (L) Le Jolis and Fucus vesiculosus L. were cultured in monocultures and mixtures of the two species under two different exposure and nutrient levels. Both intra- and inter-specific competition were examined in comparison of the mortality and growth of germlings in monocultures and mixtures of the two species. The mortality of germlings increased with increasing density and emergence periods both in the monoculture and mixtures of the two species, and the mortality of Ascophyllum was significantly higher than that of Fucus both in submerged and emerged treatments. The growth of germlings of both species reduced with increasing density but F. vesiculosus always grew faster than Ascophyllum. The values of log output ratio were more than 0.1, indicating that Fucus 'won' in the competitive battles with Ascophyllum under two nutrient- and air-exposure levels. Log output ratio was greater in high than in low nutrients, indicating that the growth of Fucus is more enhanced than that of Ascophyllum in high nutrients. In the present study, the outcome of inter specific competition between germlings of Fucus vesiculosus and Ascophyllum nodosum was slightly altered by duration of emergence and nutrient concentration, but not to such an extent as to change the outcome.

• Journal of the Korean Solar Energy Society
• /
• v.21 no.1
• /
• pp.1-10
• /
• 2001

Polycrystalline silicon(poly-Si) films are deposited on low temperature glass substrate by Hot-CVD(HWCVD). The structural properties of the poly-Si films are strongly dependent on the temperature$(T_w)$. The films deposited at high $T_w$ of $2000^{\circ}C$ have superior crystalline proper average lateral grain sizes are larger than $1{\mu}m$ and there are no vertical grain boundaries. The sur of the high $T_w$ samples are naturally textured like pyramid shape. These large grain size and text surface are believed to give high current density when applied to solar cells. However, the poly films are structurally porous and contains high defect density, by which high concentration of C and O resulted within the films by air-penetration after removed from chamber.

• Korean Journal of Agricultural Science
• /
• v.47 no.3
• /
• pp.437-443
• /
• 2020

The aim of this study was to evaluate the effect of Lactobacillus acidophilus probiotic (LAP) product supplementation on the blood profile, fecal noxious gas emission, and fecal shedding of lactic acid bacteria and coliform bacteria in healthy adult Beagle dogs. In total, 14 Beagle dogs with an average initial body weight of 10.19 ± 0.61 kg were randomly assigned into two dietary treatments,with and without LAP supplementation, for a 28-day feeding trial. At the end of the experiment, there was no significant (p > 0.05) difference in the concentration of serum total cholesterol, high-density lipoprotein cholesterol (HDL-C), low-density lipoprotein cholesterol (LDL-C), white blood cell (WBC), red blood cell (RBC), blood lymphocyte percentage, fecal hydrogen sulfide (H₂S) and total mercaptans (R.SH) emission, and fecal coliforms counts. However, the serum concentrations of the triglyceride and fecal ammonia (NH₃) emission of the LAP treatment were significantly (p < 0.05) decreased in the group compared with the CON dogs. Fecal total lactic acid bacteria counts were significantly (p < 0.05) increased in the LAP treatment. In conclusion, the supplementation of LAP in Beagle dog diets could decrease the blood triglyceride level and enhance the gut Lactobacillus count which may have positive effects on dogs.

• Journal of Pharmaceutical Investigation
• /
• v.19 no.3
• /
• pp.137-143
• /
• 1989

This study was attempted to investigate the effect of Tricholoma matsutake on experimentally induced hyperlipemia in rats. The levels of cholesterol, triglyceride and phospholipid were measured. Diagnostic attention has been paid to the cholesterol concentration associated with high density lipoprotein (HDL), which appears to be inversely related to the incidence of coronary artery disease. For these reasons, determination of HDL-cholesterol has significant meaning. Total cholesterol was determined by Abell-Kindall method, and to measure HDL-cholesterol, serum low density lipoproteins (LDL) were first selectively precipitated by HDL-precipitating reagent. The results obtained were as follows : 1) The level of total cholesterol in serum of hyperlipemic rats was decreased by oral administration of Tricholoma matsutake extract. 2) The level of HDL-cholesterol was increased by the mushroom extract. 3) The level of triglyceride was significantly decreased by the mushroom extract. 4) The level of phospholipid was slightly decreased by the mushroom extract.

• Nutrition Research and Practice
• /
• v.2 no.2
• /
• pp.62-67
• /
• 2008

The present study was carried out to evaluate the physiological effects of seaweed supplementation on blood glucose levels, lipid profile, and antioxidant enzyme activities in subjects with type 2 diabetes mellitus. Subjects were randomized into either a control group or a seaweed supplementation group. Pills with equal parts of dry powdered sea tangle and sea mustard were provided to the seaweed supplementation group three times a day for 4 weeks. Total daily consumption of seaweed was 48 g. We found that total dietary fiber intake was 2.5 times higher in subjects receiving seaweed supplementation than in the control group. Accordingly, fasting blood glucose levels (p<0.01) and 2-hour postprandial blood glucose measurements (p<0.05) were decreased significantly in those ingesting seaweed. Furthermore, the serum concentrations of triglycerides were decreased and high-density lipoprotein cholesterol was increased significantly in seaweed supplement group (p<0.05). However, the concentrations of total cholesterol and low-density lipoprotein cholesterol were not affected by seaweed supplementation. The level of thiobarbituric acid reactive substances in erythrocytes was significantly lower with seaweed supplementation compared to controls (p<0.05). Catalase and glutathione peroxidase activities with seaweed supplementation were higher than the controls (p<0.05), but superoxide dismutase activity was not affected. We, therefore, conclude that ingestion of seaweed influences glycemic control, lowers blood lipids, and increases antioxidant enzyme activities.

• Corrosion Science and Technology
• /
• v.18 no.4
• /
• pp.148-153
• /
• 2019

Pure nickel with a thickness of 1 mm was plated on type 304 stainless steels and low alloy steels (JIS G3131 SPHC) by electrolytic plating method in a circulating plating bath. Plating performance, mechanical properties, and surface characteristics were evaluated in terms of pretreatment process, anode material, pH, current density, and flow rate of the plating solution. Addition of hydrochloric acid during pre-treatment process improved the adhesion performance of plating. To improve plating efficiency, it is desirable to use S-nickel rather than electrolytic nickel. The use of S-nickel was also confirmed to be desirable for maintaining the pH and concentration of the plated solution. The defect of the plating using S-nickel anode produced pit on the surface. However, it is believed that proper control can be obtained by increasing the flow rate. Internal stress and hardness values of electrolytic nickel plating according to current density need to be carried out with further studies.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.11a
• /
• pp.172-173
• /
• 2019

As the damage to fine dust increased, the Republic of Korea designated fine dust as a social disaster. The composition of the fine dust is composed of carbon, sulfate, nitrate, ammonium and minerals. The cause of fine dust is naturally generated by dirt, pollen, etc. In addition, there are artificial causes such as gaseous vehicle exhaust gas emitted from the use of fossil fuel. When fine dust enters the human body through breathing, it causes various respiratory diseases and skin diseases. In IARC, fine dust was designated as a carcinogen group 1. In this research, we tried to adsorb fine dust by physical adsorption using powdered activate carbon. Powdered activate carbon is a powdered activated carbon activated in a carbonized state. Porous material with high specific surface area and low density. Experimental items were tested for density, water absorption, and fine dust concentration according to the PAC addition ratio. Basic experiments were carried out to fabricate the fine dust adsorption matrix.

• Korean Journal of Remote Sensing
• /
• v.38 no.4
• /
• pp.421-434
• /
• 2022

Fine particulate matter (PM2.5) has been the biggest environmental problem in Korea since the 2010s. The present study considers the value of urban forests and green infrastructure as an ecosystem service (ES) concept for PM2.5 reduction based on satellite and spatial data, with a focus on Seoul, Korea A method for the spatial ES assessment that considers social demand variables such as population and land price is suggested. First, an ES assessment based on natural environment information confirms that, while the vitality of vegetation is relatively low, the ES is high in the city center and residential areas, where the concentration of PM2.5 is high. Then, the ES assessment considering social demand (i.e., the ESS) confirms the existence of higher PM2.5 values in residential areas with high population density, and in main downtown areas. This is because the ESS of urban green infrastructure is high in areas with high land prices, high population density, and above-average PM2.5 concentrations. Further, when a future green infrastructure improvement scenario that considers the urban forest management plan is applied, the area of very high ESS is increased by 74% when the vegetation greenness of the green infrastructure in the residential area is increased by only 20%. This result suggests that green infrastructure and urban forests in the residential area should be continuously expanded and managed in order to maximize the PM2.5 reduction ES.

• Corrosion Science and Technology
• /
• v.22 no.4
• /
• pp.297-303
• /
• 2023

This study aimed to evaluate hydrogen permeation behaviors of pre-strained twinning-induced plasticity steel with or without Zn coating using electrochemical permeation technique. In contrast to un-strained and 30% strained samples, permeation current density was measured in the 60% strained sample. Tensile pre-straining at 60% involved microstructural modifications, including a high level of dislocation density and stacking fault with a semi-coherent twin boundary, which might provide a high diffusion path for hydrogen atoms. However, reproducibility of measurements of hydrogen permeation current was low due to non-uniform deformation and localized stress concentration. On the other hand, the permeation current was not measured in pre-strained TWIP steel with Zn coating. Instead, numerous blisters with some cracks were observed on the surface of the coating layer. In locally damaged Zn coating under tensile straining, hydrogen atoms could relatively easily permeate through the coating layer. However, they were trapped at the interface between the coating layer and the substrate, which might delay hydrogen penetration into the steel substrate.