• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.40 no.1
• /
• pp.1-10
• /
• 2017

The difficulties in opening and closing a sport utility vehicle (SUV) tailgate is important aspect of JD (James David) power's Initial Quality Survey (IQS) assessment, and affective quality has a big impact on the the success of thesedays products. The purpose of this study is to evaluate the perceived difficulty and satisfaction of customers by the opening and closing of the tailgate and to grasp the relationship between them and the opening and closing reaction force. The mechanical force required to open and close 42 domestic and overseas SUV tailgates was measured with the help of an auto company. In the experiment, 100 male drivers in their 20s to 50s evaluated perceived difficulty and satisfaction with opening and closing the tailgate. The results of the analysis showed that perceived difficulty and satisfaction were statistically different depending on the vehicle, but did not depend on the personal characteristics of the participants. The perceived difficulty and satisfaction regression model of tailgate opening and closing was developed by mechanical force variables and had a relatively high adjusted $R^2$ ranging from 0.62 to 0.73. The models showed that the the initial close and open force, the difference between initial and maximum close force and the difference between initial and auto-fall angle should be small for the low perceived exertion and high satisfaction. In addition, the correlation analysis between IQS score of tailages and perceived difficulty and satisfaction showed that the IQS scores were more related to the perceived difficulty and satisfaction of closing than those of opening. The results of the study will be helpful to design and test mechanical open and close structure of SUV tailgates.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.444-448
• /
• 2005

This paper presents a developing procedure of the CAN-based real-time simulator for car body control, aiming at replacing the actual W/H (Wiring Harness) and J/B(Junction Box) couple eventually. The CAN protocol, as one kind of field-bus communication, defines the lowest 2 layers of the ISO/OSI standard, namely, the physical layer(PL) and the data link layer(DLL), for which the CSMA/NBA protocol is generally adopted. For CPU, two PIC18Fxx8x's are used because of their built-in integration of CAN controller, large internal FLASH memory (48K or 64K), and their costs. To control J/B's and actuators, 2 controller boards are separately implemented, between which CAN lines communicate through CAN transceivers MCP255. A power motor for washing windshield, 1 door lock motor, and 6 blink lamps are chosen for actuators of the simulator for the first stage. For the software architecture, a polling method is used for the fast global response time despite its slow individual response time. To improve the individual response time and to escape from some eventual trapped-function loops, High/Low ports of the CPU are simply used, which increases the stability of the actuator modules. The experimental test shows generally satisfactory results in normal transmitting / receiving function and message trace function. This simulator based on CAN shows a promising usefulness of lighter, more reliable and intelligent distributed body control approach than the conventional W/H and J/B couple. Another advantage of this approach lies in the distributed control itself, which gives better performance in hard real-time computing than centralized one, and in the ability of integrating different modules through CAN.

• Journal of Internet Computing and Services
• /
• v.18 no.4
• /
• pp.19-25
• /
• 2017

In this paper, we designed and implemented IoT sensors based badminton motion analysis and training system that can be readily used by badminton players with PC. Unlike the traditional badminton training system which uses signals of the flags by coach, the proposed electronic training system used IoT sensors to automatically detect and analysis the motions for badminton players. The proposed badminton motion analysis and training system has the advantage with low power, because it communicates with the program through BLE communication. The badminton motion analysis system automatically measures the training time according to the player's movement, so it is possible to collect objective result data with less errors than the conventional flag signal based method by coach. In this paper, training data of 5 athletes were collected and it provides the feedback function through the visualization of each section of the training results by the players which can enable the effective training. For the weakness section of each player, the coach and the player can selectively and repeatedly perform the training function with the proposed training system. Based on this, it is possible to perform the repeated training on weakness sections and they can improve the response speed for these sections. Continuous research is expected to be able to compare more various players' agility and physical fitness.

• The Journal of Advanced Prosthodontics
• /
• v.5 no.4
• /
• pp.464-470
• /
• 2013

PURPOSE. The aim of this Fourier transform infrared (FTIR) spectroscopic study was to measure the degree of conversion (DC) of dual-cured resin cements light-irradiated through zirconia ceramic disks with different thicknesses using various light-curing methods. MATERIALS AND METHODS. Zirconia ceramic disks (KT12) with three different thicknesses (1.0, 2.0, and 4.0 mm) were prepared. The light transmittance of the disks was measured using ultraviolet visible near-infrared spectroscopy. Four different light-curing protocols were used by combining two curing light modes (Elipar TriLight (standard mode) and bluephase G2 (high power mode)) with light-exposure times of 40 and 120 seconds. The DCs of the two dual-cured resin cements (Duo-Link and Panavia F2.0) light-irradiated through the disks was analyzed at three time intervals (3, 7, and 10 minutes) by FTIR spectroscopy. The data was analyzed using repeated measures ANOVA (${\alpha}$=.05).Two-way ANOVA and Tukey post hoc test were used to analyze the 10 minute DC results. RESULTS. The 1.0 mm thick disk exhibited low light transmittance (<25%), and the transmittance decreased considerably with increasing disk thickness. All groups exhibited significantly higher 10 minute DC values than the 3 or 7 minute values (P<.05), but some exceptions were observed in Duo-Link. Two-way ANOVA revealed that the influence of the zirconia disk thickness on the 10 minute DC was dependent on the light-curing methods (P<.001). This finding was still valid even at 4.0 mm thickness, where substantial light attenuation took place. CONCLUSION. The curing of the dual-cured resin cements was affected significantly by the light-curing technique, even though the additional chemical polymerization mechanism worked effectively.

• Journal of Family Resource Management and Policy Review
• /
• v.17 no.1
• /
• pp.19-38
• /
• 2013

The objectives of this study were to examine how the consciousness of resource saving affects the resource-saving behaviors of urban employed wives and to induce their rational resource-saving behaviors by identifying related variables. This study also analyzed some correlations between the resource-saving consciousness and behaviors of urban employed wives to provide basic information for laying the foundations of a green growth culture. The subjects of this study were selected from among employed wives living in the urban areas of Seoul and Gyeonggi-do area. The study was conducted from June 11 to August 7, 2011. A total of 620 questionnaires were collected, and 592 of them were used in the analysis. Data was analyzed via the SPSS 18.0 program to calculate frequencies, mean and standard variation, Cronbach's ${\alpha}$, t-test, ANOVA, Pearson's correlation, hierarchical, and multiple regression analysis. A positive correlation was observed between the resource-saving consciousness and behaviors of urban employed wives. That is, their resource-saving behavior was higher their consciousness of resource saving was high. Furthermore, the most influential variables affecting the resource-saving behaviors of urban employed wives were: the subjects' job type, with specialist or office work; reference groups, such as family, relatives, and neighbors; and low levels of conspicuous consumption habits. Among the variables, the influence of reference groups had the highest explanatory power.

• International Commerce and Information Review
• /
• v.19 no.2
• /
• pp.65-84
• /
• 2017

This paper attempts to investigate FDI Trade have been viewed a power affecting economic growth in Mongolia and five Central Asian countries(Kazakhstan, Uzbekistan, Kyrgyzstan, Kazakhstan and Turkmenistan) directly and indirectly using the Vector Error Correction Model. The results of empirical analysis based on data from 1995 to 2015 confirmed that FDI had a significant impact on economic growth in the rest of countries expect Kazakhstan and Turkmenistan, and Trade was not statistically significant for all countries. Accordingly we've come to below conclusion in consideration of the results of the statistics survey. It is urgently required to implement the policies on promoting foreign investment at first in order to recover economic decline though the international trading is considered important in developing the economics of developing countries. Especially, the landlocked countries, namely the countries having same border should focus on promoting the development of transport and freight forwarding systems between the countries, implementing the policies on trade relationships and foreign direct investments throughout the nation in consideration of the low- level of market economic conditions.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.159-159
• /
• 2010

We conducted bum-in test by current stress to evaluate acceleration reliability characteristics about p-resistivity influence of GaN-based light-emitting diodes. The LEDs used in this study are the polarization field-induced LED(PF-LED) having low p-resistivity and the highly resistive LED(HR-LED) having high p-resistivity. The result of high stress experiment shows that current crowding phenomenon is occurred from the center of between p-bonding pad and n-bonding pad to either electrodes. In addition, series resistance and optical power decrease dramatically. These results means that the resistance of between p-bonding pad and p-GaN affect reliability. That's why we need to consider the ohmic contact of p-bonding pad when design the high efficiency and high reliability LEDs.

• Laser Solutions
• /
• v.10 no.3
• /
• pp.25-32
• /
• 2007

The effect of welding speed on the weldability, microstructures, hardness, tensile property of Nd:YAG laser welding joint in 600MPa grade precipitation hardening high strength steel was investigated. A shielding gas was not used, and bead-on-plate welding was performed using various welding speeds at a power of 3.5kW. Porosity in the joints occurred at 1.8m/min, but were not observed over the welding speed of 2.1m/min. However, spatter occurred over the welding speed of 6.6m/min. The hardness was the highest at heat affected zone(HAZ) near fusion zone(FZ), and was decreased on approaching to the base metal. The maximum hardness increased with increasing welding speed. The microstructure of FZ was composed of coarse grain boundary ferrite and bainite(upper) but the HAZ near the FZ contained bainite(Lower) and fine ferrite at a low welding speed. With increasing welding speed, ferrite at the FZ and the HAZ became finely and upper binite changed to lower bainite. In a perpendicular tensile test to the weld line, all specimens were fractured at the base metal, and the tensile strength and the yield strength of joints was equal to those of raw material. Elongation was found to be lower than that of the raw material.

• Journal of Korean society of Dental Hygiene
• /
• v.15 no.4
• /
• pp.565-574
• /
• 2015

Objectives: The purpose of the study is to investigate the oral health of the elderly people receiving nursing care and home care services in Chungnam. Methods: The subjects were 350 elderly people receiving 21 nursing care and home care services in Chungnam. The direct interview with the elderly people and oral examination was carried out from July, 2012 to December, 2013 after explanation fo the purpose of the study. The subjects consisted of 178 elderly people receiving nursing care services and 172 elderly people receiving home care services. Except incomplete answers, 315 data were analyzed. The questionnaire consisted of general characteristics of the subjects, characteristics by facility, oral condition, oral care behavior, correlation by factors on oral health, influencing factor on dental caries, influencing factor on periodontal disease, and influencing factor on elasticity of gingival muscle. Data were analyzed by frequency analysis, chi-square test, and multiple regression analysis using SPSS 21.0 program. Results: Multivariate analysis of influencing factors on oral health revealed that the elderly people with low education level tended to have higher incidence rate of dental caries. The influencing factors on oral health were the elasticity of gingival muscle, periodontal disease, educational level, and economic level. (p<0.05). The explanation power was 26.2%. Conclusions: Oral Health Promotion should be obligatorily established as one of the medical system and medical fee system to promote oral health condition for the aged.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.12 no.6
• /
• pp.582-590
• /
• 2019

As Korea's low fertility and aging progress, Korea is facing a social change such as an increase of one generation by entering an aging society that has raised 14% of the population. An effective way to prevent a gas fire accident caused by an increase in one generation in an aging society is to install a control valve to forcibly shut off the gas after a set time. In this study, we developed a valve that can be opened and closed by rotating the valve left and right by transmitting power to the worm gear and the helical gear by using a motor by pressing the switch. It is easy to assemble and inspect by developing a dedicated valve that is easy to attach and detach. It was developed to enhance competitiveness by reducing cost by reducing the number of parts and product size. In addition, through endurance test, it was developed to be used for more than 9 years by repeating ON / OFF once every 12 seconds so that it can operate stably for 10,000 times for 34 hours. The instrument and PCB were designed using solid works and Altium Designer tools. Firmware development was developed in IAR Embedded Workbench environment.