• 제목/요약/키워드: Low Frequency filter

검색결과 1,004건 처리시간 0.035초

신경회로망을 이용한 ECG 특성점 검출에 관한 연구 (A Study on Detection of Significant point in ECG using Neural Network)

  • 손상윤;정기삼;정성진;이명호
    • 대한의용생체공학회:학술대회논문집
    • /
    • 대한의용생체공학회 1995년도 추계학술대회
    • /
    • pp.109-112
    • /
    • 1995
  • This paper is a study on the detection of the significant point in ECG signal. ECG signal consists of two components; one is high frequency component to be detected and the other is low frequency component to be removed. AR model is appropriate for modelling and removing the low frequency component. AR model coefficients are updated by artificial neural network algorithm. We can remove the background noise(low frequency) by passing through the AR filter. The remaining signals which include high frequency noise are sent to the matched filter to pass only the signal which we want to extract. The template used in matched filter is updated adaptively.

  • PDF

대역통과필터를 이용한 직렬아크 검출에 관한 연구 (A Study on Series Arc Detection Using Band-pass Filters)

  • 김일권;김진수;박건우;김광순;김영일
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2008년도 제39회 하계학술대회
    • /
    • pp.1345-1347
    • /
    • 2008
  • This paper described a method of determining whether arcing is present in a low-voltage wiring system. We simulated the series arcing that generated in electrical loads and fabricated a arc detection module which can discriminate between normal and arcing state. The module consists of a high-pass filter with a low cut-off frequency of 3 kHz to attenuate power frequency voltage and an active band-pass filter with a frequency of 4 kHz ${\sim}$ 8 kHz to detect series arc signals only. We tested an Incandescent lamp that was controlled by a dimmer and analysed. The module consists of a high-pass filter with a low cut-off frequency of 3 kHz to attenuate power frequency voltage by 80 dB and an active band-pass filter with a frequency of 4 kHz to detect series arc signals only. From the experimental results, we could detect series arc signals without an influence of non-linear loads.

  • PDF

WCDMA 베이스밴드단 전류모드 아날로그 필터 설계 (Design of a Current-Mode Analog Filter for WCDMA Baseband Block)

  • 김병욱;방준호;조성익;최석우;김동용
    • 전기학회논문지P
    • /
    • 제57권3호
    • /
    • pp.255-259
    • /
    • 2008
  • In this paper, a current-mode integrator for low-voltage, low-power analog integrated circuits is presented. Using the proposed current-mode integrator, the baseband analog filter is designed for WCDMA wireless communication. To verify the proposed current-mode integrator circuit, Hspice simulation using 1.8V TSMC $0.18{\mu}m$ CMOS parameter is performed and achieved 44.9dB gain, 15.7MHz unity gain frequency. The described 3rd-order current-mode baseband analog filter is composed of the proposed current-mode integrator, and SFG(Signal Flow Graph) method is used to realize the baseband filter. The simulated results show 2.12MHz cutoff frequency which is suitable for WCDMA baseband block.

저역통과 LC필터를 가진 전브리지형 인버터로 구동되는 3상유동전동기의 속도제어 시스템에 관한 연구 (A Study on the Speed Control System of a 3 phase Induction Motor driven by the Full Bridge Inverter with a Low Pass LC Filter)

  • 박진길
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제22권4호
    • /
    • pp.538-550
    • /
    • 1998
  • The variable frequency and variable voltage AC source made by a conventional inverter which is composed of power semi-conductors includes much noises in sine wave due to high frequency switching of DC source. In this paper the 3rd low pass LC filter for a variable speed 3 phase induction motor driven by a full bridge inverter is introduced to solve the EMI problem by serious noise current. The utility of a modified 3rd order Butterworth LC filter is confirmed through FFT analysis of sine waves and noiseless ACsource can be obtained by the proposed LC filter. The speed of a 3 phase induction motor driven by a full bridge inverter with a LC filter is satisfactorily controlled by a digital PID controller under the condition of stepwise load and setpoint changes.

  • PDF

NREL 5MW 풍력터빈 제어용 저주파 통과 필터와 드라이브 트레인 댐퍼의 효과 고찰 (A Study on the Effect of Low Pass Filter and Drive Train Damper for the NREL 5MW Wind Turbine Control)

  • 임채욱
    • 한국산업융합학회 논문집
    • /
    • 제24권4_2호
    • /
    • pp.443-451
    • /
    • 2021
  • It is essential to examine and analyze the power output and load responses together using real-world turbulent wind speeds. In this paper, the power controller and the drive train damper are simultaneously considered using the NREL 5MW wind turbine model, and the damage equivalent load(DEL) of the low speed shaft torque and power output responses according to the natural frequency of the second order low pass filter are simultaneously investigated. Numerical testing is carried out above rated wind speed using commercially available Bladed software. From the viewpoints of DEL reduction of the drive train shaft torque and power output responses, it is shown that the natural frequency of the low pass filter is appropriately about 6 to 10rad/s. And the reduction ratio of the DEL of the low-speed shaft torque decreases as the wind speed becomes higher, and it is confirmed that the reduction ratio is limited to about 20% at high wind speeds.

Software Radio용 전압제어 주파수가변 CMOS 전류모드 필터 (A Voltage-controlled Frequency Tunable CMOS Current-mode Filter for Software Radio)

  • 방준호;유인호;유재영
    • 전기학회논문지
    • /
    • 제60권4호
    • /
    • pp.871-876
    • /
    • 2011
  • In this paper, a voltage-controlled frequency tunable current-mode integrator and a 3rd-order current-mode Chebyshev filter in 1.8V-$0.18{\mu}m$ CMOS is realized for software radio applications in system-on-chips. This filter is used for reconstruction purposes between a current-steering DAC and a current-mode mixer. Power consumption of the designed filter can be reduced by using a current-mode small size integrator. And also, cutoff frequency of this filter is variable between 1.2MHz and 10.1MHz, the power consumption is 2.85mW. And the voltage bias compensated circuit is used to control the voltage variation.in the designed filter.

주파수 변화 감지 회로를 포함하는 부궤환 루프를 가지는 저잡음 위상고정루프 (Low Noise Phase Locked Loop with Negative Feedback Loop including Frequency Variation Sensing Circuit)

  • 최영식
    • 한국정보전자통신기술학회논문지
    • /
    • 제13권2호
    • /
    • pp.123-128
    • /
    • 2020
  • 본 논문에서는 주파수 변화 감지 회로 (FVSC : frequency variation sensing circuit)를 포함하는 부궤환 루프를 가지는 저잡음 위상고정루프를 제안하였다. 위상 고정 상태에서 전압제어발진기의 출력주파수가 변화할 때 주파수 변화 감지 회로는 루프 필터의 커패시터의 전하량을 조절하여 제안한 위상고정루프의 위상잡음과 지터 특성을 개선할 수 있다. 위상고정루프의 출력 주파수가 증가하면 주파수 변화 감지 회로가 루프 필터 커패시터 전하를 감소시킨다. 이는 루프필터 출력 전압을 하강하게 하여 위상고정루프 출력 주파수가 하강하게 된다. 추가된 부궤환 루프는 제안한 위상고정루프의 위상잡음 특성을 더욱 더 좋게 한다. 주파수 변화 감지 회로에 사용된 커패시터 크기는 영점을 결정하는 루프 필터 커패시터 크기와 비교하여도 아주 작은 크기이어서 칩 크기에 영향을 미치지 않는다. 제안된 저잡음 위상고정루프는 1.8V 0.18㎛ CMOS 공정을 이용하여 설계되었다. 시뮬레이션 결과는 273fs 지터와 1.5㎲ 위상고정시간을 보여주었다.

위성 통신용 주파수 하향 변환기의 설계 및 제작 (Design and Implementation of Frequency Down Converter for Satellite Communication)

  • 이승대;나상엽
    • 한국산학기술학회논문지
    • /
    • 제13권2호
    • /
    • pp.801-807
    • /
    • 2012
  • 본 논문에서는 LC 필터 기술을 기반으로 하는 주파수 단일 하향 변환기를 설계 및 제작하였다. 설계한 단일 하향 변환기는 저잡음 증폭기, 혼합기 IF 증폭기, LC 필터로 구성하였으며 DC block 커패시터와 RF bypass 커패시터로 구성된다. 설계한 변환기는 IC를 LC 필터로 대치하여 전력을 감소시키고 제작비용을 낮추어주는 효과를 보인다. 본 논문에서 설계, 제작한 단일 하향 변환기는 이득이 약 10dBm이고 70MHz에서 18MHz의 대역폭을 실현하였다.

저주파필터를 적용한 Wegmann 방법의 수렴성에 관한 연구 (A study on the convergence of Wegmann's method applying a low frequency pass filter)

  • 송은지
    • 정보처리학회논문지A
    • /
    • 제11A권2호
    • /
    • pp.203-206
    • /
    • 2004
  • 저자는 등각사상을 구하기 위한 기존의 여러 Theodorsen 방정식의 해법 중 가장 유효한 해법으로 알려져 있는 Wegmann의 방법을 다룬바 있다. Wegmann의 방법으로 수치실험을 한 결과 난이도가 높다고 예상되는 문제에 있어 수렴했다가 발산을 하는 불안정현상이 나타났으며 수렵하지 않는 불안정현상의 원인을 분석하여 저주파필터를 적용한 새로운 반복법을 제안하였다. 원래의 Wegmann 반복법으로는 발산하는 모튼 문제에 있어서 새로 제안한 방법에 의해서 수렴하는 수치실험 결과를 얻었는데 본 논문에서는 저주파필터를 적용한 Wegmann해법에 의해 실험적으로 수렴한 결과를 Fourier 분석기법에 의해 이론적으로 증명한다.

웨이브렛 변환을 이용한 잔향시간의 측정 (Estimation of Reverberant Time Using Wavelet Transform)

  • 이상권;김봉기
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2000년도 춘계학술대회논문집
    • /
    • pp.1762-1766
    • /
    • 2000
  • Estimation of reverberant time is one of important factor for the calculation of absorption ration of absorption material. In general the digital filter bank has been used for the, estimation of decay curve of the sound pressure in a reverberant room. However at low frequency, it is not easy to get a good linear decay curve for the estimation of reverberant time. Now, wavelet transform is applied to this difficult task, a good result has been obtained at low frequency. The decay curve using wavelet filter bank is better than that using digital filter bank at low frequency. At higher frequency, both curves are similar.

  • PDF