• 한국통신학회논문지
• /
• 제23권8호
• /
• pp.2090-2095
• /
• 1998

본 논문에서는 한국내 인터넷상의 음성패킷손실을 측정하였고 패킷손실의 변화에 따른 명료도를 분석하였다. RTP를 기반으로 하는 실시간 전송프로토콜과 통화품질 평가법을 고찰하였으며 실험을 위하여 GSM과 RTP/UDP/IP를 이용한 실시간 음성통신 시스템을 구현하였다. 명료도 평가를 위하여 선택된 음절목록은 GSM에 의하여 실시간 코딩 및 압축되었으며 각 패킷은 패킷손실의 복원과 손실률 측정을 위하여 시퀀스번호를 갖고 있다. 한국내 인터넷 상의 7개 라우팅을 거친 전송 실험결과, 트래픽량에 따라 1.6%에서부터 22.5%까지의 패킷손실을 나타내었으며 시퀀스번호 재배열과 FEC 알고리즘을 통한 손실패킷의 복원률은 9%에서 35%까지 나타났고 패킷손실의 변화에 따른 단음절명료도와 2음절 이해도 평가결과는 표 4와 같다.

• 전기전자학회논문지
• /
• 제16권3호
• /
• pp.203-210
• /
• 2012

기존의 DC-DC 부스트 변환기에 사용되는 non-overlapping gate driver는 dead-time이 고정되어 있기 때문에 body-diode conduction loss 또는 charge-sharing loss가 발생하는 문제점을 가지고 있다. 이러한 loss에 의한 효율 감소를 줄이기 위해 본 논문에서는 dead-time 적응제어 기능을 갖는 PWM DC-DC 부스트 변환기를 설계하였다. 제안된 DC-DC 부스트 변환기는 CMOS $0.35{\mu}m$ 공정으로 설계되었고, 입력전압 2.5V를 받아서 3.3V의 출력전압으로 승압시킨다. 스위칭 주파수는 500kHz이며, 최대효율은 97.3%이다.

• 폴리머
• /
• 제33권6호
• /
• pp.581-587
• /
• 2009

PLA와 PEG를 사용하여 용융블렌드 방법으로 PLA/PEG 블렌드 섬유를 제조한 후 in vitro 환경조건인 pH7.4, 온도 $37\;^{\circ}C$의 완충용액에서 1~8주 동안 가수분해한 다음 무게감량률 및 인장강도 등에 미치는 영향을 검토하였다. 가수분해 시간이 1주에서 8주까지 증가함에 따라 블렌드 시간은 10~30분으로, PEG 함량은 5~30 wt%로 증가할수록 PLA/PEG 블렌드 섬유의 무게감량률은 증가하는 경향이, 인장강도 및 인장탄성률은 감소하는 경향이 현저하게 나타남을 확인하였다. 결론적으로 가수분해 시간 2주까지는 PLA/PEG 블렌드 섬유의 무게 감량률은 약 0.9% 이내이고 강도유지율은 약 90% 이상을 나타냄으로써 임계상처치유기간 중 양호한 강도가 유지될 수 있음을 확인하였다.

• 한국소음진동공학회논문집
• /
• 제14권5호
• /
• pp.370-376
• /
• 2004

The overall aim of this paper is to determine coupling loss factor of welding point between shell and cylinder using loss factor and structural loss factor. For this purpose, two kinds of loss factor were adopted. One is loss factor of each sub structure, another is structural loss factor based on the complex welded or assembled structure. Using these two parameters, it ispossible to derive the coupling loss factor which represent characteristic condition of SEA theory. Coupling loss factor of conjunction in complex structure was expressed as power balance equation. The derived equation for a coupling loss factor has been simplified on the assumption of one way (uni-directional) power flow between multi-sub structures. Using these conditions, it is possible to find the equation of coupling loss factor expressed as above two loss factors. To check the effectiveness of above equation, this paper used two-stage application. The first approach was application between simple cylinder and shell. The next was adopted rotary compressor. Rotary compressor has three main conjunctions between shell and internal vibration part. This equation was applied to find out the optimum welding point with respect to reduce the noise propagation. It shows the effective tool to evaluate the coupling loss factor in complex structure

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.969-972
• /
• 2003

The overall aim of this paper is to determine coupling loss factor of welding point between shell and cylinder using loss factor and structural loss factor. For this purpose, two kinds of loss factor were adopted. One is loss factor of each sub structure, another is structural loss factor based on the complex welded or assembled structure. Using these two parameters, it is possible to derive the coupling loss factor which represent characteristic condition of SEA theory. Coupling loss factor of conjunction in complex structure was expressed as power balance equation. The derived equation for a coupling loss factor has been simplified on the assumption of one way(nl- directional) power flow between multi-sub structures. Using these conditions, it is possible to find the equation of coupling loss factor expressed as above two loss factors. To check the effectiveness of above equation, this paper used two stage application. The first approach was application between simple cylinder and shell. The next was adopted rotary compressor. Rotary compressor has three main conjunctions between shell and internal vibration part. This equation was applied to find out the optimum welding Point with respect to reduce the noise propagation. It shows the effective tool to evaluate the coupling loss factor in complex structure

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 A
• /
• pp.73-75
• /
• 1999

The time harmonics of an inverter output voltage cause high frequency currents in the rotor bars of a squirrel cage induction motor, so that the harmonic copper loss density increases in the upper lesion of the bars. Such an higher loss density makes an nonuniform thermal source and deforms the bars due to the thermal stress. Therefore, in this paper, the copper loss distribution in the rotor bar of an inverter-fed induction motor, which is the source of the thermal stress, is analyzed by the time-stepping finite element method. As a result, the harmonic copper losses of 11 subregions in a bar are calculated and compared with those of sinusoidally fed induction motor.

• 대한임베디드공학회논문지
• /
• 제16권5호
• /
• pp.179-186
• /
• 2021

For stereo matching based on deep learning, the design of network structure is crucial to the calculation of matching cost, and the time-consuming problem of convolutional neural network in image processing also needs to be solved urgently. In this paper, a method of stereo matching using sparse loss volume in parallax dimension is proposed. A sparse 3D loss volume is constructed by using a wide step length translation of the right view feature map, which reduces the video memory and computing resources required by the 3D convolution module by several times. In order to improve the accuracy of the algorithm, the nonlinear up-sampling of the matching loss in the parallax dimension is carried out by using the method of multi-category output, and the training model is combined with two kinds of loss functions. Compared with the benchmark algorithm, the proposed algorithm not only improves the accuracy but also shortens the running time by about 30%.

• 한국멀티미디어학회논문지
• /
• 제20권7호
• /
• pp.1030-1037
• /
• 2017

Traffic flows of real-time multimedia services such as Internet phone and IPTV are bounded on the end-to-end delay. Packets violating their delay limits will be dropped at a router because of not useful anymore. Service providers promise the quality of their providing services in terms of SLA(Service Level Agreement), and they, especially, have to guarantee the packet loss rates listed in the SLA. This paper is about a method to guarantee the required packet loss rate of each traffic flow keeping the high network resource utilization as well. In details, it assures the required loss rate by adjusting adaptively the timestamps of packets of the flow according to the difference between the required and measured loss rates in the lossy Weighted Fair Queuing(WFQ) scheduler. The proposed method is expected to be highly applicable because of assuring the packet loss rates regardless of the fluctuations of offered traffic load in terms of quality of services and statistical characteristics.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회 2001년도 추계학술대회 논문집
• /
• pp.184-187
• /
• 2001

The purpose of this study is to find the perceived risk which influences consumers' purchase attitudes so that consumers' participation in electronic commerce could be enhanced. Consumer behavior involves risk in the sense that any action of a consumer will produce consequences which one cannot anticipate, and some of which are at least likely to be unpleasant. The types of perceived risks are financial risk, performance risk, social risk, psychological risk, time loss, opportunity loss, privacy risk, fashion loss, delivery risk, seller's response risk and seller's fraud risk The findings are as follows: $\circled1$ The financial risk, performance risk, time loss, delivery risk, seller's response risk and seller's fraud risk have negative effects on the consumers' purchase attitudes. $\circled2$ There is no difference in the level of perceived risk according to the demographic factors such as age, education and income level.

• Journal of Electrical Engineering and Technology
• /
• 제12권2호
• /
• pp.632-642
• /
• 2017

This paper presents an improved approach towards reducing the switching loss of insulated gate bipolar transistors (IGBTs) for a medium-capacity-class power conditioning system (PCS). In order to improve the switching performance, the switching operation is analyzed, and based on this analysis, an improved switching method that reduces the switching time and switching loss is proposed. Compared to a conventional gate drive scheme, the switching loss, switching time, and delay are improved in the proposed gate driving method. The performance of the proposed gate driving method is verified through several experiments.