Transactions of the Korean Society for Noise and Vibration Engineering (한국소음진동공학회논문집)

The Korean Society for Noise and Vibration Engineering (한국소음진동공학회)
권호 표지
DOI QR코드

DOI QR Code

Optimum Welding Position between Shell and Cylinder based on SEA

SEA를 이용한 셸과 실린더의 최적 용접 조건

  • Published : 2004.05.01
Download PDF
⟨ Previous Next ⟩

Abstract

The overall aim of this paper is to determine coupling loss factor of welding point between shell and cylinder using loss factor and structural loss factor. For this purpose, two kinds of loss factor were adopted. One is loss factor of each sub structure, another is structural loss factor based on the complex welded or assembled structure. Using these two parameters, it ispossible to derive the coupling loss factor which represent characteristic condition of SEA theory. Coupling loss factor of conjunction in complex structure was expressed as power balance equation. The derived equation for a coupling loss factor has been simplified on the assumption of one way (uni-directional) power flow between multi-sub structures. Using these conditions, it is possible to find the equation of coupling loss factor expressed as above two loss factors. To check the effectiveness of above equation, this paper used two-stage application. The first approach was application between simple cylinder and shell. The next was adopted rotary compressor. Rotary compressor has three main conjunctions between shell and internal vibration part. This equation was applied to find out the optimum welding point with respect to reduce the noise propagation. It shows the effective tool to evaluate the coupling loss factor in complex structure

Keywords

References

  1. Int. Compressor Engineering Conference at Purdue Vibration Characteristic of Welding Point Based on the Loss Factor of Rotary Compressor Ahn,B.H.
  2. International Compressor Engineering Conference at Purdue A Study on Noise Identification of Compressor Based on 2dimensional Complex Sound Intensity Ahn,B.H.
  3. American Institute of aeronautics and astronautics Journal v.4 On Panel Viration Damping due to Structural Joint Ungar,E.E.;Carbonell,J.R. https://doi.org/10.2514/3.3682
  4. Journal of Sound and Vibration v.103 no.1 Prediction of Total Loss Factors of Structures: Theory and Experiments Sun,J.C.;Richards,E.J. https://doi.org/10.1016/0022-460X(85)90250-0
  5. Journal of the Acoustical Society of America v.34 Measurements of Absorption Coefficients on Plates Hecker,M. https://doi.org/10.1121/1.1918199
  6. Journal of Sound and Vibration v.70 In Situ Determination of Loss and COupling Loss Factors by Power Injection Method Bies,D.A.;hamid,S. https://doi.org/10.1016/0022-460X(80)90595-7
  7. Acoustic Society of America v.37 New Method of Measuring Reverberation Time Schuroeder,M.R. https://doi.org/10.1121/1.1909343