• Journal of the Institute of Convergence Signal Processing
• /
• v.7 no.3
• /
• pp.87-94
• /
• 2006

For realizing an ubiquitous home network(uHome-net), various sensors should be able to be connected to an integrated wire/wireless sensor network. This paper describes an application case of applying LonWorks technology being widely used in control network to wire/wireless sensor network in uHome-net and the design and application of LonRF device that consists of a neuron chip including LonTalk protocol, a 433.92MHz RF transceiver, a sensor, and application programs. As an application example of the LonRF device, the LonRF smart badge that can measure the 3D location of objects in indoor environment and interwork with the uHome-net was developed. LonRF device based home network services were realized on the uHome-net testbed such as indoor positioning service, remote surveillance service and remote metering service were realized. This research shows that LonWorks technology based sensor network could be applicable to the control network in an ubiquitous home network and the LonRF device can be used as a wireless node in various sensor networks.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2002.11a
• /
• pp.355-361
• /
• 2002

There are many economic and operational reasons to integrate fire alarm signaling system with other building automation system. Integration of this requires open network with for the standard communication protocol and careful design practices. The important point for this is also the development of intelligent control modules for replacing the conventional zone adapter in fire system. Therefore, this paper proposes an new conceptual design of the open distributed fire alarm signaling system for the integration of BAS, a new intelligent control modules with LonTalk protocol and a new control modules for power line communication. Newly proposed additions to LonWorks network make it very well suited for integrating fire systems with other building automation sub-systems and another BAS with low cost. Additionally, it is very important that best design practices, test procedures and building codes need to be modernized to accommodate integrated building systems.

• Proceedings of the IEEK Conference
• /
• 2002.06a
• /
• pp.367-370
• /
• 2002

In this paper, we propose a new node architecture LonWorh control Network for home network system environmint using power line communications. Using conventional Lon Work technology is a many disputable points for home network. LonWork network system needs high-cost development equipment. Moreover, conventional Lon Work system can not implement high-grade algorithms and variety application operation. because of the limitation of processing ability in Neuron chip. For that reason, the proposed structure is applicable to low-cost and more complex applications which are impossible in home network using conventional Lonworks structure. The proposed structure is implemented with some hardware and かone software for power line home network. The physical layer and the MAC layer of the LonTalk protocol within ton Work are implemented in hardware, which decreases the development costs communication processor. The upper of link layer of the LonTalk protocol is implemented with software, which decreases the development costs of software and increases the flexibility of tile system and increases the extension of the system. We verified the commercial feasibility of the proposed system through the power line tests with the existing LonWorks network in home network. As a result, it is concluded that the proposed architecture provides increasing flexibility and decreasing cost of the system.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.15 no.2
• /
• pp.87-96
• /
• 2001

This paper proposes a new internet Web based concept & design method and implementation of LonWorks network system for remote intelligent control. The Experimental LonWorks network system using i·LON Web server is designed and fabricated. It is also verified that the developed control modules with LonTalk protocol have available inter offerable, reliable performance characteristics from the experimental results, Especially, the results provide a available technical data for remote home, building & plant automation control.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.582-585
• /
• 2001

Requirements for device networks differ greatly from those of data(business) networks. Consequently, any control network technology which uses a fieldbus protocol is, in general, different from IP network protocol TCP/IP. One needs to integrate fieldbus protocol and TCP/IP to realize distributed control over IP network or internet. This paper suggests a basic concept that can be applied to distributed control over IP network or internet. Specifically, LonWorks technology that uses LonTalk protocol is reviewed as device network. LonWorks technology provides networked intelligent I/O and controllers which make it a powerful, expandable solution. It is also addressed that many hardwired PLCs can be replaced by LonWorks devices. Connecting these remote LonWorks networks to the Internet can provide a powerful, integrated, distributed control system.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2001.11a
• /
• pp.157-162
• /
• 2001

There are many economic and operational reasons to integrate fire alarm signaling system with other building automation system. Integration of this requires communication standard and careful design practices. The important point for this is also the development of intelligent control modules for replacing the conventional zone adapter in fire system. Therefore, this paper proposes an new conceptual design of the distributed fire alarm signaling system and a new intelligent control modules with LonTalk protocol. Newly proposed additions to LonWorks network make it very well suited for integrating fire systems with other building automation systems. Additionally, it is very important that best design practices, test procedures and building codes need to be modernized to accommodate Integrated building systems.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.17 no.4
• /
• pp.64-73
• /
• 2003

There are many economic and operational reasons to integrate fire alarm signaling system with other building automation system Integration of this requires open network with the standard communication protocol and careful design practices. The important point for this is also the development of intelligent control modules for replacing the conventional zone adapter in fire system. Therefore, this paper proposes an new conceptual design of the open distributed fire alarm signaling system for the integration of BAS and a new intelligent control modules with LonTalk protocol. Newly proposed additions to LonWorks network make it very well suited for integrating fire systems with other building automation systems. Additionally, it is very important that best design practices, test procedures and building codes need to be modernized to accommodate integrated building systems.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.70.5-70
• /
• 2001

This paper proposes a new Internet based control concept & design method and implementation of LonWorks network system for remote intelligent control. The experimental network system using i.LON Web server is designed and fabricated. It is also verified that the developed control modules with LonTalk protocol have available, interoperable, and reliable performance characteristics from the experimental results. Especially, the results provide a available technical data for remote home, building & plant automation control.

• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.6
• /
• pp.566-573
• /
• 2004

This paper describes the ubiquitous home network (uHome-net) testbed and LonRF intelligent devices based on LonWorks technology. These devices consist of Neuron Chip, RF transceiver, sensor, and other peripheral components. Using LonRF devices, a home control network can be simplified and most devices can be operated on LonWorks control network. Also, Indoor Positioning System (IPS) that can serve various location based services was implemented in uHome-net. Smart Badge of IPS, that is a special LonRF device, can measure the 3D location of objects in the indoor environment. In the uHome-net testbed, remote control service, cooking help service, wireless remote metering service, baby monitoring service and security ＆ fire prevention service were realized. This research shows the vision of the ubiquitous home network that will be emerged in the near future.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.82.4-82
• /
• 2001

Requirements for device control networks differ greatly from those of data (business) networks. Consequently, any control network which uses a filedbus protocol is, in general, different from If network protocol TCP/IP. One then needs to integrate both fieldbus protocol and TCP/IP to realize distributed control over IP network or internet. LonWorks technology provides networked intelligent I/O and controllers which make it a powerful, expandable solution. Connecting these remote Lon Works networks to the Internet can provide a powerful, integrated, distributed control system. This paper suggests a basic concept that be applied to distributed control over IP network or internet. Specially, Lonworks technology that used LonTalk protocol is reviewed as device network and ...