• Journal of Sensor Science and Technology
• /
• v.28 no.1
• /
• pp.17-22
• /
• 2019

As CMOS technology scales down, reliability is becoming an important concern for VLSI designers. This paper analyzes gate-oxide breakdowns (i.e., the time-dependent dielectric-breakdown (TDDB) aging effect) as a reliability issue for combinational circuits with 45-nm technology. This paper shows simulation results for the noise margin, delay, and power using a single inverter-chain circuit, as well as the International Symposium on Circuits and Systems (ISCAS)'85 benchmark circuits. The delay and power variations in the presence of TDDB are also discussed in the paper. Finally, we propose a novel method to compensate for the logic failure due to dielectric breakdowns: We used a higher supply voltage and a negative ground voltage for the circuit. The proposed method was verified using the ISCAS'85 benchmark circuits.

• ETRI Journal
• /
• v.43 no.4
• /
• pp.728-745
• /
• 2021

Carbon nanotube field-effect transistors (CNTFETs) have been widely studied as a promising technology to be included in post-complementary metal-oxide-semiconductor integrated circuits. Despite significant advantages in terms of delay and power dissipation, the fabrication process for CNTFETs is plagued by fault occurrences. Therefore, developing a fast and accurate method for estimating the reliability of CNTFET-based digital circuits was the main goal of this study. In the proposed method, effects related to faults that occur in a gate's transistors are first represented as a probability transfer matrix. Next, the target circuit's graph is traversed in topological order and the reliabilities of the circuit's gates are computed. The accuracy of this method (less than 3% reliability estimation error) was verified through various simulations on the ISCAS 85 benchmark circuits. The proposed method outperforms previous methods in terms of both accuracy and computational complexity.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.3
• /
• pp.397-409
• /
• 1993

This paper proposed the design methodology of the 8 bit binary parallel adder with carry book-ahead scheme via current-mode CMOS multivalued logic and simulated the proposed adder under $5{\mu}m$ standard IC process technology. The threshold conditions of $G_K$ and $P_K$ which are needed for m-valued parallel adder with CLA are evaluated and adopted for quaternary logic. The design of quaternary CMOS logic circuits, encoder, decoder, mod-4 adder, $G_K$ and $P_K$ detecting circuit and current-voltage converter is proposed and is simulated to prove the operations. These circuits are necessary for binary arithmetic using multivalued logic. By comparing with the conventional binary adder and the CCD-MVL adder, We show that the proposed adder cab be designed one look-ahead carry generator with 1-level structure under standard CMOS technology and confirm the usefulness of the proposed adder.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.6
• /
• pp.745-752
• /
• 2018

ICs(Integrated circuits) for nuclear power plant exposed to radiation environment occur malfunctions and data errors by the TID(Total ionizing dose) effects among radiation-damage phenomenons. In order to protect ICs from the TID effects, this paper proposes a radiation-hardening of the logic circuit(D-latch) which used for the data synchronization and the clock division in the ICs design. The radiation-hardening technology in the logic device(NAND) that constitutes the proposed RH(Radiation-hardened) D-latch is structurally more advantageous than the conventional technologies in that it keeps the device characteristics of the commercial process. Because of this, the unit cell based design of the RH logic device is possible, which makes it easier to design RH ICs, including digital logic circuits, and reduce the time and cost required in RH circuit design. In this paper, we design and modeling the structure of RH D-latch based on commercial $0.35{\mu}m$ CMOS process using Silvaco's TCAD 3D tool. As a result of verifying the radiation characteristics by applying the radiation-damage M&S (Modeling&Simulation) technique, we have confirmed the radiation-damage of the standard D-latch and the RH performance of the proposed D-latch by the TID effects.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.36C no.5
• /
• pp.1-12
• /
• 1999

A new algorithm of constructing binary decision diagram(BDD) for design verification of switch-level circuits is proposed in this paper. In the switch-level circuit, functions are characterized by serial and parallel connections of switches and the final logic values may have high-impedance and unstable states in addition to the logic values of 0 and 1. We extend the BDD to represent functions of switch-level circuits as acyclic graphs so called switch-level binary decision diagram (SLBDD). The function representation of the graph is in the worst case, exponential to the number of inputs. Thus, the ordering of decision variables plays a major role in graph sizes. Under the existence of pass-transistors and domino-logic of precharging circuitry, we also propose an input ordering algorithm for the efficiency in graph sizes. We conducted several experiments on various benchmark circuits and the results show that our algorithm is efficient enough to apply to functional simulation, power estimation, and fault-simulation of switch-level design.

• Proceedings of the IEEK Conference
• /
• 2003.07c
• /
• pp.2609-2612
• /
• 2003

This paper describes a 64 channel signal generator/analyzer module that is useful for verification and testing of digital circuits. It can perform logic analyzer function and signal generator function at the same time. The 64 Channel module is implemented with single FPGA chip for miniaturization, and an USB interface is used to increase portability of the module. Multiple modules can be used in parallel for the verification of large scale circuits. Moreover, since the module is implemented as a PC based system, one can configure convenient GUI(Graphic User Interface) environment.

• Proceedings of the IEEK Conference
• /
• 1998.06a
• /
• pp.883-886
• /
• 1998

We introduce a high level synthesis methodlogoy for automatic synthesis of asynchronous circuits form a language based on CSP. The input language is a high level concurrent algorithmic specification that can model complex concurrent control flow, logical and arithmetic computation and communications between them. This specification is translated into petri net which has actions. These actions are refined to synthesize the controllers and to allocate the data resources. We use the automatic synthesis through signal transition graphs (STGs) that allows to take advantage of logic synthsis methods to optimize the circuit.

• 전기의세계
• /
• v.30 no.1
• /
• pp.55-63
• /
• 1981

This paper deals with the drive contrl of common elevator systems which may be realized with .mu.p-controlled selective-collective elevator systems. Incorporation on non-contact point circuits instead of electromagnetic relays in such an elevator system results in miniaturization of complicated hardware controllers currently being used. The drive control method is implemented by software programming. The important features are not only technical advantages such as higher performance, high speed data processing and more improved reliability, but also lower cost as compared with the conventional elevator drive control units equipped with a number of sequential electromagnetic relays and even more recent static IC logic circuits.

• Proceedings of the IEEK Conference
• /
• 2000.07a
• /
• pp.195-198
• /
• 2000

It is possible to perform the digital fuzzy logical high-speed and high-precision computation by the use of redundantly-represented binary positive-digit number arithmetic operation. In this paper, as basic operation circuits in the fuzzy logic new voltage-mode 4-valued binary parallel processing operation circuits using positive redundantly-expressed binary-coded numbers is discussed.

• Proceedings of the IEEK Conference
• /
• 2001.06e
• /
• pp.5-8
• /
• 2001

In this paper, we have space vector PWM(Pulse Width Modulation) circuits on the FPGA(Field Programmable Gate Arry) chip designed by VHDL(Very high speed integrated circuit Hardware Description Language). This circuit parts was required at controlling the AC servo motor system and should have been designed with many discrete digital logics. In the result of this study, peripheral circuits are to be simple and the designed logic terms are robust and precise. Because of it's easy verification and implementation, we could deduced that the customize FPGA chip show better performance than that of circuit modules parts constituted of discrete IC.