• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 B
• /
• pp.742-744
• /
• 1999

In this paper, a new precharge type PFD for fast locking time of PLL is suggested. It is realized by inserting NMOS transistor and inverter into the precharge part of PFD for isolating the reset of the Up signal from the feedback signal. The new precharge type PFD generates the Up signal while the feedback signal is fixed at a high level. Therefore the new PFD output is increased than the conventional precharge type PFD output. As a result of the increased PFD output, fast locking of PLLs is achieved. Additionally, with control the falling time of the inverter, the dead-zone is reduced and the jitter characteristics are improved. The whole characteristics of PFD and PLL are simulated by using HSPICE. Simulation results show that the dead-zone is 20ps and the locking time of PLL using the new PFD is 38ns at the 350MHz frequency of referecne signal. This value is quite small compared with conventional PFD.

• 한국정밀공학회지
• /
• 제31권9호
• /
• pp.805-811
• /
• 2014

In this investigation, we constructed and demonstrated a simple Yb-doped fiber laser, of which longitudinal modes are mode-locked without any additional devices to compensate the dispersion caused by optical components. Non-linear polarization rotation (NPR) was adopted for the mode-locking mechanism and a polarization controller (PC) was used for a kind of spectral filters to restrict the bandwidth for mode-locking. As the result, the laser was successfully operated as mode-locked with the repetition rate of 42.2 MHz and the spectrum was broadened up to approximately 16 nm at 1033 nm center wavelength when the laser was mode-locked. In this paper, the operation of the developed Yb-doped mode-locked laser is explained with the concept of Lyot filter realized by a PC, which enables mode-locking under normal dispersion. In the industrial applications, this laser can be used as a seed laser of the high power lasers for optical manufacturing.

• 한국정보통신학회논문지
• /
• 제14권12호
• /
• pp.2769-2774
• /
• 2010

본 논문에서는 밀리미터파 대역의 신호 발생을 위한 헤테로다인 방식인 sideband injection locking 방법을 제안하고 실험적으로 분석하였다. 향후, 무선 이동통신, 초고속 광대역 통신망 등에 사용되어질 밀리미터파 신호는 전기적 요소의 한계로 광학적인 요소에 의해 신호를 생성하는 방법이 많이 연구되고 있으며 광학적 기술에 기초한 소자기술 등이 발전되고 있다. 따라서 본 논문에서는 향후 밀리미터파 대역에서 사용되어질 LMDS(Local Multi-point Distribution Service) 등의 시스템에서 수십기가 헤르츠급의 광원으로 응용 가능한 헤테로다인 방식을 이용한 밀리미터파 대역의 신호생성에 대한 이론적 방법 및 실험적 고찰을 통하여 검증하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.1188-1191
• /
• 2003

In this paper, we focus our attention on the improvement of locking time and jitter parameter and propose the new structure of PLL which combined with the FVC, FOVI Matcher(FVC-Output and VCO-input Matching Circuit), Control Circuit and the conventional charge pump PLL. Using fast operation characteristics of the FVC, the circuit matching FVC-Output and VCO-input (FOVI Matcher) made to synchronize very fast. Fast locking time is usually required for application where the PLL has to settle rapidly if they switch from an idle mode to a normal mode and to track high-frequency data bit rate in data recovery systems. After a fast acqusition is achieved by the using the FVC, the conventional PLL operates for removing the phase error between the reference signal and the feedback signal. Therefore this structure can improve the trade-off between acquisition behavior and locked behavior.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.1285-1293
• /
• 2008

Locking sheet is to display the contents of interlocking equipment for safe train drive in stations. It is being used as a basic information for interlocking equipment and for route control condition and the discussion for train operation between related parties. In spite of importance of this, there was no other way except depending on the work by hands from each stage(drawing, examination, discussion, approval) due to non-existing any tool. It is written it takes 30days from drawing to approval by procedures. However, it is required over the days in real time due to argument of each party. Furthermore on drawing of locking sheet, special conditions applied in accordance with situations of each station occasionally are different depending on the person in charge. Therefore, it is urgent to make up Logic Tree to accept special conditions of all stations. Automation Program for Drawing and Examination of Locking Sheet is to improve inefficient interlocking operation which was operated by hands in accordance with custom as automated system. The target of this program is to minimize the processing time and potential errors by personal work and set up standards for Logic Tree of special condition.

• Current Optics and Photonics
• /
• 제5권4호
• /
• pp.384-390
• /
• 2021

This paper presents a wide-range tunable wavelength-locking technology based on optoelectronic oscillation (OEO) loops for optical fiber sensors and microwave photonics applications, explains the theoretical fundamentals of the design, and demonstrates a method for locking the relative wavelength differences between a leader semiconductor laser and its follower lasers. The input of the OEO loop in the proposed scheme (the relative wavelength difference) determines the radio-frequency (RF) signal frequency of the oscillation output, which is quantized into an injection current signal for feedback to control the wavelength drift of follower lasers so that they follow the wavelength change of the leader laser. The results from a 10-hour continuous experiment in a field environment show that the wavelength-locking accuracy reached ±0.38 GHz with an Allan deviation of 6.1 pm over 2 hours, and the wavelength jitter between the leader and follower lasers was suppressed within 0.01 nm, even though the test equipment was not isolated from vibrations and the temperature was not controlled. Moreover, the tunable range of wavelength locking was maintained from 10 to 17 nm for nonideal electrical devices with limited bandwidth.

• 한국자동차공학회논문집
• /
• 제9권2호
• /
• pp.130-136
• /
• 2001

This paper presents an of a brake pressure restriction valve to a motorcycle anti-lock brake system(ABS). In the conventional anti-lock brake system of automobiles, slip ratio as a control variable is actively controlled, which requires wheel speed sensors, ECU, and a pressure modulator. In the ABS valve that has been developed for use in motorcycles, however, the brake pressure that is close to the wheel locking pressure is preset by simple exercises and then the valve just allows to pass the wheel locking pressure and cutoff the remaining pressure. Simulation studies with a single wheel braking dynamics and lumped chassis model show that the pressure restriction valve has basic ABS functions as well as some robustness properties for the uncertain load and road conditions as well as various initial braking speeds. Field tests also show that the pressure restriction valve avoids the wheel locking effectively.

• 전자공학회논문지CI
• /
• 제40권6호
• /
• pp.22-31
• /
• 2003

데이터베이스 시스템에서 기존의 동시성 제어전략은 통신 중단이 빈번히 발생하는 모바익 컴퓨팅 환경 하에서는 부적절하다. 모바일 컴퓨팅에서는 거래들을 처리하기 위한 시간이 극히 제한적이다. 이러한 시간을 가장 효율적으로 활용하기 위해서는 단기거래위주의 처리가 바람직하다 통신 중단으로 인한 Service Handoff는 특히 단기거래인 경우 모바일 거래들의 성능을 저하시킬 수 있다. 이타적 잠금 기법은 lock/unlock연산 이외에 donate 연산을 사용하기 때문에 단기거래 들에 대해 효율적이다. 모바일 컴퓨팅에서 이타적 잠금 기법을 사용했을 경우 단기거래의 성능은 향상될 수 있다.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2001년도 봄 학술발표논문집 Vol.28 No.1 (B)
• /
• pp.16-18
• /
• 2001

Despite extensive research on R-trees, most of the proposed schemes have not been integrated into existing DBMS due to the lack of protocol to provide consistency in concurrent environment. R-link tree is an acceptable data structure to deal with this issue., but still not enough. In this paper, we focus on a simplified predicate locking mechanism based on R-link tree for concurrency control and phantom protection. An in-memory operation control list (OCList) used to suspend some conflicting operations is designed here. The main features of this approach are (1) it can be implemented easily and do not need any extra information. (2) Only-one-lock is held when descending R-tree even when node split happens, while lock-coupling scheme is performed when ascending. No deadlocks are possible. (3) Searches and insertions are not unnecessarily restricted. (4) Insert and Delete phantom in R-link tree are avoid through beforehand predication.

• 대한전자공학회논문지SD
• /
• 제45권5호
• /
• pp.82-87
• /
• 2008

본 논문은 고속 위상 고정이 가능한 새로운 듀얼 슬로프 위상고정루프를 제안한다. 기존의 듀얼 슬로프 위상고정루프는 각각 2개의 전하펌프와 위상 주파수 검출기로 구성되었다. 본 논문에서는 위상차에 따라 전하펌프의 전류를 조절해 하나의 전하펌프와 위상 주파수 검출기만으로 듀얼 슬로프 위상고정루프를 구현하였다. 제안된 회로는 $0.35{\mu}m$ CMOS 공정 파라미터 값으로 HSPICE 시뮬레이션을 수행하여 회로의 동작을 검증하였다. 제안된 듀얼 슬로프 위상고정루프의 위상 고정 시간은 $2.2{\mu}s$로 단일 슬로프 위상고정루프의 위상 고정 시간인 $7{\mu}s$보다 개선된 결과를 얻었다.