• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.28 no.6
• /
• pp.579-586
• /
• 2010

Due to the recent development of measuring technology and 3D programs, it has become possible to obtain various spatial data. This study utilizes the 2-dimensional data and 3-dimensional data extraction technology based on the existing empirical and statistical DB. The data obtained from geospatial data technology are integrated with civil engineering BIM to conduct the modeling of the topography of the target region and select the optimum location condition by using the cut and fill balance of the volume of earth. The target area is the land around Tamjin River, Jangheong-gun, Jeolla-do. The 3-dimensional topology linked with 3-dimensional mapping technology by using the orth-image and aerial LiDAR that uses aerial photo of the target area is visualized with Civil3D of AutoDesk. By using Civil3D program, the Thanks to the recent development of measuring technology and 3D programs, target area is analyzed through visualization and related data can be obtained for analysis. The method of using civil engineering BIM enables to obtain various and accurate information about the target area which is helpful for addressing the issues risen from the existing methodology. In this regard, it aims at searching for the alternatives and provides suggestions to utilize the information.

• Journal of Korean Neurosurgical Society
• /
• v.30 no.4
• /
• pp.451-455
• /
• 2001

Objectives : There have been several studies documenting the changing level of the conus throughout infancy and childhood, but there is only a little detailed study that documents the range of conus positions in a living adult population, especially in Korean, without spinal deformity. Methods : we made a sequential study of magnetic resonance images of the lumbar spine to determine the variation in position of the conus medullaris in 650 living korean adults population without spinal deformity who checked MRI to identify the cause of low back pain. The study population consisted of patients over the age of 16 years. A T1-weighted, midline, sagittal image was reviewed for identifying the postion of conus. This location was recorded in relation to the upper, middle, or lower third of the adjacent vertebral body or the adjacent intervertebral disc. Results : The study group consisted of 305 men(47%) and 345 women(53%) with a mean age 45.9 years(range, 16-79 years). The conus existed commonly at the middle third of L1(131cases, 20.2%), at the L1-2 intervertebral space(129cases, 19.8%), and the lower third of L1(123cases, 18.9%). The mean position of conus was the lower third of L1(range, middle third of T12 to middle third of L3). Conclusions : The mean position of conus was at the lower third of L1(range, middle third of T12 to middle third of L3). This results was same as that of foreign study. Our results of living korean adult population could allow for safe clinical procedures such as lumbar puncture, spinal anesthesia, and help to explain the differences among observed neurologic injuries from fracture-dislocation at the thoracolumbar junction.

• Journal of KIISE:Software and Applications
• /
• v.31 no.9
• /
• pp.1142-1149
• /
• 2004

Motion Estimation(ME) has been developed to reduce temporal redundancy in digital video signals and increase data compression ratio. ME is an Important part of video encoding systems, since it can significantly affect the output quality of encoded sequences. However, ME requires high computational complexity, it is difficult to apply to real time video transmission. for this reason, motion estimation algorithms with low computational complexity are viable solutions. In this paper, we present an efficient method with low computational complexity based on spatial and temporal correlations of motion vectors. The proposed method uses temporally and spatially correlated motion information, the motion vector of the block with the same coordinate in the reference frame and the motion vectors of neighboring blocks around the current block in the current frame, to decide the search pattern and the location of search starting point adaptively. Experiments show that the image quality improvement of the proposed method over MVFAST (Motion Vector Field Adaptive Search Technique) and PMVFAST (Predictive Motion Vector Field Adaptive Search Technique) is 0.01～0.3(dB) better and the speedup improvement is about 1.12～l.33 times faster which resulted from lower computational complexity.

• Korean Journal of Remote Sensing
• /
• v.27 no.1
• /
• pp.33-41
• /
• 2011

In the information communication technology, it is world-widely apparent that trend movement from internet web to smartphone app by users demand and developers environment. So it needs kinds of appropriate technological responses from geo-spatial domain regarding this trend. However, most cases in the smartphone app are the map service and location recognition service, and uses of geo-spatial contents are somewhat on the limited level or on the prototype developing stage. In this study, app for extraction of corner point features using geo-spatial imagery and their linkage to database system are developed. Corner extraction is based on Harris algorithm, and all processing modules in database server, application server, and client interface composing app are designed and implemented based on open source. Extracted corner points are applied LOD(Level of Details) process to optimize on display panel. Additional useful function is provided that geo-spatial imagery can be superimposed with the digital map in the same area. It is expected that this app can be utilized to automatic establishment of POI (Point of Interests) or point-based land change detection purposes.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.19 no.1
• /
• pp.25-43
• /
• 2016

This research was completed to provide fundamental data regarding the guidelines to installing and managing utility facilities & structures in wetland protected area to advance the functions and sustainable use of ecology services by preserving the ecology within wetland protected area. There were 5 on-site researching areas that were used as the main subject with these areas chosen and considered from 21 inland wetlands that have been designated and are being managed from the Ministry of Environment and by their designated dates as a wetland protected area. The utility facilities in these wetland areas were categorized by their types and a detailed on-site investigation was proceeded with investigation items chosen whereas these facilities are working by their roles from their location, size, used materials, types, information contents and etc., The results showed that regarding informational structures, several locations of information boards were distanced from the main exploring routes which did not consider the visitor's eye level which had their readability dropped and by sunlight, time lapse and water penetration, many information boards were damaged or corrupted so that it was hard to confirm the information noticed or understanding an image. Insufficient observation and educational structures were installed that considered the ecological characteristics of wild animals and their living conditions. Regarding convenience facilities, there were parking lots that were installed on the fore-land and to decrease non-point solution sources, some parking lots needed to be located in protected lowlands while some facilities' shape and colors did not harmonize with their natural surroundings, creating a sense of awareness, which will need some more consideration. As for safety facilities, they were very insufficient compared to other facilities. This means that additional safety structures are needed so that related personnel can be aware of where a visitor is located when an accident occurs. Protectional facilities strongly needed new structures and a management system to cut off entrances and do surveillance so that visitors do not go into areas outside of the managed areas and bring damages to restricted locations. Research labs needed to expand the use of automatic weather systems and water gauge equipments to build fundamental data regarding floodgates that are intimated to the forming of wetlands. Sensor cameras and other types of monitoring systems are needed to monitor the majority types of animals living in the wetlands as well.

• The Journal of the Korea Contents Association
• /
• v.13 no.5
• /
• pp.303-310
• /
• 2013

Thyroid nodular disease is the most frequently appeared in thyroid disease. Thyroid ultrasonography offers location of nodules, size, the number, information of internal echo characteristic. Thus, it makes possible to sort high-risk nodule containing high possibility about thyroid cancer and to induct precisely when take a Fine Needle Biopsy Aspiration. On thyroid nodule, the case which is diagnosed as malignant is less than 5% but screening test is very important on ultrasound and also must be reduced unnecessary procedure. Therefore, in this study an approach for describing a region is to quantity its texture content. We applied TFA algorithm on case which has been pathologically diagnosed as papillary thyroid cancer. we obtained experiment image which set the ROI on ultrasound and cut the $50{\times}50$ pixel size, histogram equalization. Consequently, Disease recognition detection efficiency of GLavg, SKEW, UN, ENT parameter were high as 91~100%. It is suggestion about possibility on CAD which distinguishes thyroid nodule. In addition, it will be helpful to differential diagnosis of thyroid nodule. If the study on additional parameter algorithm is continuously progressed from now on, it is able to arrange practical base on CAD and it is possible to apply various disease in the thyroid US.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.2
• /
• pp.318-328
• /
• 2018

The purpose of this study was to investigate the differences in the characteristics of the aesthetic salon operation and job satisfaction according to important considerations in opening aesthetic salons as well as to provide basic data for improving the operation of the salons. Toward this aim, a questionnaire survey was conducted for owners of small aesthetic salons across South Korea from January-March, 2016. Results were as follows: Among those who identified means of transportation and parking convenience as key considerations in launching aesthetic salon businesses, length of service, length of business operation, monthly fixed revenue and proportion of the highest profit were highest. Job satisfaction (F=3.223, p<.05) was highest (M=4.11) among those that responded 'floating population' as a primary component in launching aesthetic salon businesses, and lowest among owners who mentioned 'cost of investment' (M=3.41). Specifically, job mobility (F=2.960, p<.05) was the highest among respondents who selected means of transportation and parking convenience (M=3.95) as key criteria in launching aesthetic salon business. For the stable operation of an aesthetic salon, a location with high floating population, good transportation, parking convenience, high levels of customer access, and job satisfaction are critical factors. In addition, future studies should examine marketing strategies by operating characteristics.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.1
• /
• pp.622-632
• /
• 2018

With the recent changes in the social environment, the growth in the so-called 'five major crimes' has been highlighted as one of the causes of anxiety in Koreans' lives. Many attempts have been made to solve this problem; however, it is still difficult to secure the location information of the socially vulnerable in emergency situations and to precisely identify the features and clothing of criminals and track them using current image analysis technology. Therefore, the development of precision positioning technology and support services along with intelligent security service technology based on spatial information has been given a high priority. This study suggested measures that could be continuously applied to link technologies and services with high linkability by analyzing technologies based on spatial information and other fields. To establish measures for linkage between intelligent security technology and other technologies and services, this study analyzed the existing technologies and research trends in intelligent security technology, and reviewed linkable services according to five criteria established to evaluate their linkability. Based on this analysis, three technologies with high linkability were ultimately selected, and measures for linkage were established. It is expected that the linkage measures derived using the objective evaluation criteria will serve as a stepping stone for promoting active technology linkage and commercialization in the future, even after the completion of this study.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37B no.9
• /
• pp.778-786
• /
• 2012

Sensors that are used on wireless sensor networks can be divided into two types: directional sensors, such as PIR, image, and electromagnetic sensors; and non-directional sensors, such as seismic, acoustic and magnetic sensors. In order to guarantee the line-of-sight of a directional sensor, the installation location of the sensor must be higher than ground level. Among non-directional sensors, seismic sensors should be installed on the ground in order to ensure the maximal performance. As a result, seismic sensors may have network connectivity problems due to communication failure. In this paper, we propose a 3D node deployment method to maximize the coverage and the network connectivity considering the sensor-specific properties. The proposed method is for non-directional sensors to be placed on the ground, while the directional sensor is installed above the ground, using trees or poles, to maximize the coverage. As a result, through the topology that the detection data from non-directional sensors are transmitted to the directional sensor, we can maximize the network connectivity. Simulation results show that our strategy improves sensor coverage and network connectivity.

• Journal of Periodontal and Implant Science
• /
• v.34 no.2
• /
• pp.281-292
• /
• 2004

Periodontal defects of the furcation are characterized by several inherent anatomic factors that can make successful periodontal therapy difficult and results unpredictable. The severity and rate of occurrence of periodontal disease are directly related to the location of the furcation relative to the cementa-enamel junction and anatomical form of the root by limiting the accessibility and effectiveness of the periodontal instrumentation. This study investigated the reliability and accuracy of panoramic radiograph diagnoses of the periodontal state of mandibular molars, particularly regarding the diagnosis of furcation area periodontal defects, treatment planning, and prognosis prediction. This study examined a total of 110 teeth belonging to 33 subjects (19 male, 14 female) presenting with incipient to moderate periodontitis 4-7mmpocket depth. The alveolar bone level, length and width of the root trunk, and root separation angle were measured using the panoramic radiograph and compared to the results taken directly by retracting a full-thickness flap. The results of the study are as follows: 1. Data regarding the alveolar bone level of the mandibular first molar showed that the directly taken surgical measurements resulted in $5.1{\pm}0.9mm$ that was slightly deeper than the corresponding panoramic measurement resulted in $4.8{\pm}0.8mm$, but these differences were statistically insignificant (p>0.05). 2. The data of the directly taken surgical measurement of the mandibular second molar $(5.1{\pm}1.1mm)$ was slightly deeper than the corresponding panoramic measurement $(4.7{\pm}1.2mm)$, but these differences were statistically insignificant (p>0.05). 3. The measured values of the length and width of the mandibular first molar root trunks were determined to be $4.1{\pm}0.6mm$ and $7.3{\pm}0.9mm$, respectively, while the values of the mandibular second molar root trunks were determined to be $4.6{\pm}1.3mm$ and $7.6{\pm}0.9mm$ respectively. The differences between these values were found to be statistically significant (p<0.01). 4. The measured values of the root separation angle showed that the mandibular first molars averaged $34.5{\pm}4.4^{\circ}$, while the mandibular second molars averaged $23.0{\pm}10.0^{\circ}$. The differences between these values were found to be statistically significant (p<0.01).