• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 동계학술발표대회 논문집
• /
• pp.452-457
• /
• 2008

We performed a study on the contaminant transfer in a clean space for the location of product and fan filter unit using computational fluid dynamics analysis. To simplify the real product moving process, three different non-moving cases regrading the locations of product were selected: no product, at the lower side, and at the upper and lower sides. And to investigate the characteristics of the contaminant transfer, the arrangement of fan filter units was varied. Local mean air-age and contaminant distribution were used as evaluation indices. From the results, the contaminant transfer to the product was the most when the products were simultaneously located at the upper and lower sides. And the contaminant was easily exhausted regardless of the location of product when the fan filter units were properly arranged at the top side of the clean space.

• 한국유체기계학회 논문집
• /
• 제13권3호
• /
• pp.24-29
• /
• 2010

Axial fans for an air-conditioning unit are designed to equip the system with an expected flow-rate and low noise level by applying the blade design method of multi-sectioning and local camber generation. In this study, the distributions of chord length, stagger angle, and camber angle are globally and locally determined for the given specific speed, which is considered to be relatively high. The mock-up fans are observed to satisfy the aerodynamic performance and the noise level for the system simultaneously and discussed in terms of local flow patterns related to the emitted noise.

• Journal of the Korean Data and Information Science Society
• /
• 제14권2호
• /
• pp.209-216
• /
• 2003

Contingent valuation method (CVM) is a main evaluation method of nonmarket goods for which markets either do not exist at all or do exist only incompletely; an example is environmental good. A dichotomous choice approach, the most popular type of CVM in environmental economics, employs binary discrete choice models as statistical estimation models. In this paper, we propose a semiparametric dichotomous choice CVM method using local linear model of Fan and Gijbels (1996) in which probability distribution of error term is specified parametrically but latent structural function is specified nonparametrically. The computation procedures of the proposed method are illustrated with a simple design of simulations.

• 대한수학회보
• /
• 제57권4호
• /
• pp.921-932
• /
• 2020

In this paper we prove the local existence of strong solutions to an isentropic compressible Navier-Stokes-P1 approximate model arising in radiation hydrodynamics in a bounded domain with vacuum.

• Communications for Statistical Applications and Methods
• /
• 제4권1호
• /
• pp.177-183
• /
• 1997

A data-adaptive order selection procedure is proposed for local polynomial nonparametric regression. For each given polynomial order, bias and variance are estimated and the adaptive polynomial order that has the smallest estimated mean squared error is selected locally at each location point. To estimate mean squared error, empirical bias estimate of Ruppert (1995) and local polynomial variance estimate of Ruppert, Wand, Wand, Holst and Hossjer (1995) are used. Since the proposed method does not require fitting polynomial model of order higher than the model order, it is simpler than the order selection method proposed by Fan and Gijbels (1995b).

• 터널과지하공간
• /
• 제28권6호
• /
• pp.609-619
• /
• 2018

주선풍기가 설치된 통기수갱이 굴착된 국내 석회석 광산에서 수행한 통기수갱의 통기효과 분석결과 자연통기 및 기계통기 효과가 뚜렷하게 나타났다. 수갱을 통하여 입기되는 자연통기량은 최대 $11.7m^3/s$이었으며 갱내 공기온도의 측정에 의하여 비교적 정확한 정량적 예측이 가능하였다. 선풍기 가동에 의한 배기 통기량은 $20.3{\sim}24.8m^3/s$로 통기량의 변동은 갱도내 장비의 이동에 의한 통기특성곡선의 상향이동에 따른 선풍기 운전점의 변화에 의한 결과이므로 통기저항의 저감 노력이 요구된다. 갱구로부터 수갱까지 총 1912 m 갱도내 난류확산계수는 $15m^2/s$, $18m^2/s$로 나타나 오염물질은 기류보다 상대적으로 빨리 확산되므로 공기질 제어를 위하여 신속한 배기가 요구된다. 따라서 통기용 수갱은 급격히 심부화 및 대형화되고 있는 국내석회석광산의 지속적 개발을 위한 필수적 갱내 환경제어 시설로 권장되어야할 것으로 판단된다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집D
• /
• pp.950-954
• /
• 2001

Gasoline engine manufacturers are currently considering designs that will result in low combustion air temperature for improvement of fuel consumption and emission levels. There are a variety of cooling systems that can be used to accomplish this goal. Coolong is therefore normally achieved through a balance of ram and fan action. This paper studies the various systems and compare the cooling performance for several conditions, based on a automotive engine. An experimental analysis was developed to predict the interaction of the fan system and the heat exchangers of the engine cooling system. The local temperature induced by the fan on the cooling system is measured. These experimental result were accomplished using air flow management techniques.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집B
• /
• pp.940-945
• /
• 2001

Gasoline engine manufacturers are currently considering designs that will result in low combustion air temperature for improvement of fuel consumption and emission levels. There are a variety of cooling systems that can be used to accomplish this goal. Cooling is therefore normally achieved through a balance of ram and fan action. This paper studies the various systems and compare the cooling performance for several conditions, based on a automotive engine. An experimental analysis was developed to predict the interaction of the fan system and the heat exchangers of the engine cooling system. The local temperature induced by the fan on the cooling system is measured. These experimental result were accomplished using airflow management techniques.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2690-2695
• /
• 2007

This work presents numerical optimization for design of a blade stacking line of a low speed axial flow fan with a fast and elitist Non-Dominated Sorting of Genetic Algorithm (NSGA-II) of multi-objective optimization using three-dimensional Navier-Stokes analysis. Reynolds-averaged Navier-Stokes (RANS) equations with ${\kappa}-{\varepsilon}$ turbulence model are discretized with finite volume approximations and solved on unstructured grids. Regression analysis is performed to get second order polynomial response which is used to generate Pareto optimal front with help of NSGA-II and local search strategy with weighted sum approach to refine the result obtained by NSGA-II to get better Pareto optimal front. Four geometric variables related to spanwise distributions of sweep and lean of blade stacking line are chosen as design variables to find higher performed fan blade. The performance is measured in terms of the objectives; total efficiency, total pressure and torque. Hence the motive of the optimization is to enhance total efficiency and total pressure and to reduce torque.

• 한국터널지하공간학회 논문집
• /
• 제14권2호
• /
• pp.107-116
• /
• 2012

네트워크형 도로터널 내 분기부 구조물과 제트팬에 의한 분기 환기효율 분석하고자 실제 도로터널을 1/45로 축소하여 실험을 수행하였다. 차량이 주행할 때 발생하는 교통관성력을 적용하기 위해 블로워 팬를 사용하여 축소모형 터널내 기류를 형성하였고, 터널의 국부적인 위치에서 속도를 측정하여 분기 효율을 연구하였다. 구조물의 특징으로 발생되는 환기 저감을 개선하기 위해 제트팬을 설치하여 터널 내 환기 효율을 최적화하였다.