• 대한토목학회논문집
• /
• 제31권4B호
• /
• pp.353-360
• /
• 2011

본 연구는 수리 실험을 통하여 보 형상 변화에 따른 보 하류부 세굴의 시간적 변화를 분석하였다. 보 하류부 세굴에 대한 기존의 연구는 최대세굴심의 예측에 대한 연구가 대부분이었으나 현장에서 발생 가능한 실제 세굴심의 예측을 위해서는 시간 변화에 따른 세굴심의 변화에 대한 연구가 필요하다. 본 연구에서는 예연보, 경사형보와 같은 보 형상 변화에 따른 하류부 세굴의 시간적 변화를 수리실험을 통하여 분석하였다. 보 형상별 시간 변화에 따른 세굴심 예측식은 유사의 연속방정식을 기본으로 실험을 통하여 측정된 시간변화에 따른 보 하류부 세굴공의 체적 변화량과 보 하류부 세굴심 변화량 자료들의 회귀분석을 통하여 평형세굴시간, 평형세굴심, 월류고, 보 높이를 이용한 세굴심 예측공식을 제안하였다. 제안된 식은 기존의 보 하류부 평형 세굴심 예측식들이 반영하지 못한 설계홍수지속기간을 반영할 수 있어서 보 하류부 세굴보호공의 설계 시 경제적이고 합리적인 설계가 가능할 것으로 판단된다.

• Journal of Welding and Joining
• /
• 제16권5호
• /
• pp.56-66
• /
• 1998

During solidification or welding of alloys, the solute redistribution brings out microsegregation. The microsegregation causes the formation of non-equilibrium second phases, shrinkage and porosity degrading mechanical/chemical properties Therefore, it has been required to predict microsegregation quantitatively. To predict the degree of microsegregation, more exact and appropriate computer simulation technique has been actively used during last two decades. To predict the degree of microsegregation in weld metal, an advanced two dimensional model was suggested. In the new model, both primary and secondary arm regions were defined for the analysis region. The growth in the primary arm regina was assumed to be a planar for effective calculation. Especially, for the growth of a secondary arm, a simple and effective mathematical function was established to show the growing pattern, the solute diffusion in the solid phase was calculated by finite difference method (FDM). The solid-liquid interface movement was considered to be in local equilibrium state. The experiments for welding of 310S stainless steel were carried out in order to examined the reasonability and feasibility of this model. The concentration profiles of the solute predicted by this model were compared with those obtained from experimental works.

• 한국초전도ㆍ저온공학회논문지
• /
• 제25권3호
• /
• pp.22-27
• /
• 2023

Magnetic properties of MgB₂ superconducting powder were investigated. M(H), the magnetic field H dependence of magnetization M, was measured and analyzed using a PPMS instrument. The MgB₂ superconducting powder showed high critical current density J_c > ~ 10⁷ A/cm² and clean limit superconducting properties. The equilibrium magnetization M_eq properties of MgB₂ powders exhibiting various superconducting properties were studied. We find that the equilibrium magnetization M_eq(H) properties of MgB₂ powders showing conventional BCS properties deviate from the predictions of the standard local-London theory at temperatures below T = 19 K and are in good agreement with the generalized nonlocal-London theory. Nonlocal-London analysis was used to determine and analyze the nonlocal parameters. The temperature dependence of the London penetration depth values λ(T) was studied.

• Structural Engineering and Mechanics
• /
• 제7권2호
• /
• pp.159-180
• /
• 1999

The present paper shows a new non-tensorial approach to derive basic equations for various structural analyses. It can be used directly in numerical computation procedures. The aim of the paper is, however, to show that the approach serves as an excellent tool for analytical purposes also, working as a link between analytical and numerical techniques. The paper gives a method to derive, at first, expressions for strains in general beam and shell analyses, and secondly, the governing equilibrium equations. The approach is based on the utilization of local fixed Cartesian coordinate systems. Applying these, all the definitions required are the simple basic ones, well-known from the analyses in common global coordinates. In addition, the familiar principle of virtual work has been adopted. The method will be, apparently, most powerful in teaching the theories of curved beam and shell structures for students not familiar with tensor analysis. The final results obtained have no novelty value in themselves, but the procedure developed opens through its systematic and graphic progress a new standpoint to theoretical considerations.

• 대한기계학회논문집B
• /
• 제26권6호
• /
• pp.875-882
• /
• 2002

The modeling for turbulent flow through a porous media has not been confirmed because of a undetermined constant which appears in the governing equations. In present study, the turbulent porous modeling based on the local thermal equilibrium has been extended to the turbulent clear flow. A undetermined constant is also suggested by microscopic analysis. The microscopic analysis is performed in the flat tube with micro-channels, and it confirms that the undetermined constant is 0.99. It is shown that the results of the macroscopic analysis using confirmed constant agree well with those of the microscopic analysis with a maximum error of 3.5%.

• Kyungpook Mathematical Journal
• /
• 제57권2호
• /
• pp.265-285
• /
• 2017

In this article, a mathematical model is proposed and analyzed to study the delayed dynamics of a system having a predator and two preys with distinct growth rates and functional responses. The equilibrium points of proposed system are determined and the local stability at each of the possible equilibrium points is investigated by its corresponding characteristic equation. The boundedness of the system is established in the absence of delay and the condition for existence of persistence in the system is determined. The discrete type gestational delay of predator is also incorporated on the system. Further it is proved that the system undergoes Hopf bifurcation using delay as bifurcation parameter. This study refers that time delay may have an impact on the stability of the system. Finally Computer simulations illustrate the dynamics of the system.

• 대한전기학회논문지
• /
• 제45권3호
• /
• pp.415-425
• /
• 1996

This study presents an analytical method of solving the behaviors of arc plasma in a nozzle constricting transferred-type torch and purposes to obtain the basic data for the design of a plasma torch, which can be obtained from the temperature, pressure, velocities and voltage distributions. We have to solve some conservation equations simultaneously and need to know the exact thermal gas properties in order to obtain the correct behaviors of arc plasma. It is also necessary to give the relevant physical or geometric boundary conditions. For the simplicity of analysis, we assumed that (a) the plasma flow is laminar, (b)the local thermodynamic equilibrium, i.e. LTE, prevails over the entire arc column region. The electrode sheath effects were neglected and the nozzle area was excluded from the analysis by assuming that the current flow into the nozzle is zero. We solved the momentum transfer equation including the self-magnetic pinch effect, and obtained the temperature distribution from the energy conservation equation. From this temperature, we could get arc voltage distribution. (author). refs., figs., tabs.

• 대한기계학회논문집B
• /
• 제21권10호
• /
• pp.1284-1293
• /
• 1997

The electrostatic effect on particle deposition onto a heated, Horizontal free-standing wafer surface was investigated numerically. The deposition mechanisms considered were convection, Brownian and turbulent diffusion, sedimentation, thermophoresis and electrostatic force. The electric charge on particle needed to calculate the electrostatic migration velocity induced by the local electric field was assumed to be the Boltzmann equilibrium charge. The electrostatic forces acted upon the particle included the Coulombic, image, dielectrophoretic and dipole-dipole forces based on the assumption that the particle and wafer surface are conducting. The electric potential distribution needed to calculate the local electric field around the wafer was calculated from the Laplace equation. The averaged and local deposition velocities were obtained for a temperature difference of 0-10 K and an applied voltage of 0-1000 v.The numerical results were then compared with those of the present suggested approximate model and the available experimental data. The comparison showed relatively good agreement between them.

• 한국지반공학회논문집
• /
• 제15권3호
• /
• pp.27-40
• /
• 1999

사면안정해석을 수행하기 위하여 많이 사용하는 한계평형방법은 일정한 가정을 하여 안전율을 평형에 필요한 응력과 흙의 전단강도의 비로 정의하여 대상사면의 안전율을 구한다. 유한요소법을 이용한 사면안정해석방법은 응력상태를 유한요소법으로 구한 후 원호나 대수나선형등의 일정한 모양의 사면 파괴선을 가정하여 반복적으로 최소안전율을 구한다. 본 연구에서는 유한요소법을 이용한 사면안정해석방법을 개발하여 사면의 가장 취약한 부분을 따라 파괴선이 발생하도록 하였다. 이것은 요소내의 국부안전율과 파괴각을 고려하여 사면파괴선을 자동적으로 구할 수 있도록 함으로써 가능한데 이 방법은 임의의 파괴선을 가정할 필요가 없으며 절편에 작용하는 힘에 대하여 가정을 할 필요가 없고 임의의 모양의 파괴선을 구할 수 있는 장점이 있다. 본 연구에서는 개발된 해석방법을 검증하기 위하여 가상의 사면, 자연사면, 그리고 댐사면에 적용하여 실무에서 많이 사용하는 한계평형방법 프로그램인 STABL5M과 SLOPE/W과 비교 평가하였다.

• 대한기계학회논문집
• /
• 제13권4호
• /
• pp.572-582
• /
• 1989

본 논문에서는 윗면에 균일한 압력을 받는 외팔보의 굽힘 변형과 고정 자유 지지된 무한길이 스트립의 폭 방향 굽힘변형을 위에 언급된 이론을 적용하여 살펴보고자 한다. 먼저 기본 지배방정식들을 요약하여 변형률의 1차항까지 나타내며 각 경우에 대해 변형을 중심선에 상대적인 단면의 변위와 단면의 회전 그리고 병진을 나타내며 각 경우에 대해 변형을 중심선에 상대적인 단면의 변위와 단면의 회전 그리고 병진을 나타내는 도심의 변위로 분해하고 도심에 상대적인 변위는 Michell에 의한 평판의 해와 St. Venant에 의한 봉의 해를 이용한다. 가정된 변위장으로부터 응력을 구한 다음 적절한 조건 하에서 국부평형방정식을 구하여 전체평형방정식을 유도한다. 또한 이로부터 각 단면의 회전과 중심선의 변위가 구해질 수 있음을 보인다.