• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 봄 학술발표회 논문집
• /
• pp.635-638
• /
• 2000

This experimental were carried out in order to investigate the equivalent strength of SFRC (Steel Fiber Reinforced Concrete). Tow hundred and tenh SFRC beeam (size: 150x150x550) were used in the tests the relationships between loading and mid-point deflections of the beams were observed four oint bending loading. From the test results, prediction formulas for the equivalent strength of SFRC beams are suggested.

• 환경영향평가
• /
• 제17권1호
• /
• pp.1-9
• /
• 2008

Non-point pollution is caused by many diffusive sources, unlike a point pollution derived from industrial wastewater treatment plants or sewage treatment plants. Runoff of non-point pollutants is originated from rainfall or thawing in short period of time moving over and through the a ground surface. They cause ill effect on the quality of neighboring aquatic environment. To prevent effectively the wash off from non-point pollutant, it should be immediately reduced at the source or be treated after gathering of runoff water. This study has been carried out for the best width of riparian buffer zone. So we implemented the experiment in terms of its depth, width and kind of vegetations and calculated the reduction of pollutants loading. The experimental zone encompasses the watershed of Namhan River (Kyunggido Yangpyunggun Byungsanri). The region was divided into 5 land cover sectors : grass, reed, pussy willow, mixed(grass+pussy willow) and natural zone to compare effectiveness of vegetation. Water samples from four points have been collected in different depths. And the pollutant removal efficiency by sectors with different plant species was yielded through influent with one of each sample. And we obtained the correlation between the width of riparian buffer zone and the removal efficiency of pollutants. Using correlation result, the width of riparian buffer zones which needs to improve the water quality of river could be derived.

• The Journal of Advanced Prosthodontics
• /
• 제14권1호
• /
• pp.22-31
• /
• 2022

PURPOSE. The purpose of this study was to investigate the misfit and screw preload at the implant abutment connection of implant supported fixed dental prosthesis with cantilever (ICFDP) manufactured using different digital manufacturing techniques and to compare the screw preload before and after cyclic loading. MATERIALS AND METHODS. Mandibular jaw model with four intra-foraminal implants was scanned using digital scanner. Stereolithography file was used to design a framework with nonengaging (NE) abutments and 10 mm cantilever distal to one terminal implant. Five frameworks were constructed using combined digital-conventional techniques (CAD-cast), and five frameworks were constructed using three-dimensional printing (3DP). Additional CAD-cast framework was constructed in a way that ensures passive fit (PF) to use as control. Scanning electron microscope (SEM) measured the implant abutment connection misfit. Sixty screws were used on the corresponding frameworks. Screws were torqued and pre-cyclic loading reverse torque value (RTV) was recorded. Frameworks were subjected to 200,000 loading cycles with a loading point 9 mm from the center of terminal implants adjacent to the cantilever and post-cyclic loading RTVs were recorded. RESULTS. Microscopic readings showed significant differences between frameworks. PF demonstrated the lowest measurements of 16.04 (2.6) ㎛ while CAD-cast demonstrated the highest measurements of 29.2 (3.1) ㎛. In all groups, RTVs were significantly lower than the applied torque. Post-cyclic loading RTV was significantly lower than pre-cyclic loading RTV in PF and 3DP frameworks. Differences in RTVs between the three manufacturing techniques were insignificant. CONCLUSION. Although CAD-cast and three-dimensionally printed (3DP) both produce frameworks with clinically acceptable misfit, 3DP might not be the technique of choice for maintaining screw's preload stability under an aggressive loading situation.

• 대한기계학회논문집A
• /
• 제26권6호
• /
• pp.1127-1134
• /
• 2002

The present paper provides an engineering J estimation equation for surface cracked plates under combined bending and tension. The proposed equation is based on the reference stress approach, and the most relevant normalising loads to define the reference stress for accurate J estimations are given for surface cracked plates under combined bending and tension. Comparisons with J results from extensive 3-D FE analyses, covering a wide range of crack geometry, plate geometry and loading combination, show overall good agreement not only at the deepest point but also at arbitrary points along the crack front. for pure tension, agreement between the estimated J and the FE results is excellent, even at the surface point. On the other hand, for pure bending and combined bending and tension, the estimated J values become less accurate for locations close to the surface point. Thus the results in this paper will be useful to assess short-term fracture or low cycle fatigue of surface defects in plates under combined bending and tension.

• 멤브레인
• /
• 제6권2호
• /
• pp.109-116
• /
• 1996

본 연구는 흡착과 막분리를 결합시킨 혼성 시스템을 폐수처리에 응용하기 위한 기초 연구로서, 페놀을 분말활성탄에 의해 흡착하고, 흡착된 페놀을 활성탄과 함께 정밀여과에 의해 분리하였다. 분말활성탄의 입자크기가 클수록 여과저항은 감소하였으며, 활성탄의 양이 적을수록 단절점(break point) 이전의 투과농도 변화율과 페놀 부하 변화율은 증가하였다. 분말활성탄의 입자크기가 작을수록 활성탄의 외표면적과 경막물질전달계수의 증가로 인해 단절점 전의 투과농도는 감소하였다.

• 한국공간구조학회논문집
• /
• 제4권3호
• /
• pp.103-109
• /
• 2004

본 논문은 조합하중을 받는 공간구조물의 안정경계를 파악하는 것이다. 구조물에 작용하는 독립된 여러 가지 하중벡터는 기본이 되는 하중 모드와 하중매개 변수를 이용하여 나타내고, 독립된 하중 매개변수에는 비례관계를 설정함으로서 하나의 하중변수에 의해 하중을 부여한다. 구조물의 좌굴하중 즉 임계점은 평형조건이 불안정이 되는 극한점과 분기점으로 분류되고, 가장 낮은 하중이 좌굴하중으로 정의된다. 본 논문에서는 기하학적 비선형 문제를 해석하기 위한 수치해석법으로는 호장법과 뉴턴-랩슨법을 이용하였으며, 본 해석을 통하여 안정경계를 파악함은 물론 좌굴모드 및 좌굴하중을 명확히 규명하였다.

• Steel and Composite Structures
• /
• 제51권1호
• /
• pp.53-61
• /
• 2024

Aluminum foams sandwich panel (AFSP) has been used in engineering field, where cyclic loading is used in most of the applications. In this paper, the fatigue life of AFSP prepared by the bonding method was investigated through a three-point bending test. The mathematical statistics method was used to analyze the influence of different plate thicknesses and core densities on the bending fatigue life. The macroscopic fatigue failure modes and damage mechanisms were observed by scanning electron microscopy (SEM). The results indicate that panel thickness and core layer density have a significant influence on the bending fatigue life of AFSP and their dispersion. The damage mechanism of fatigue failure to cells in aluminum foam is that the initial fatigue crack begins the cell wall, the thinnest position of the cell wall or the intersection of the cell wall and the cell ridge, where stress concentrations are more likely to occur. The fatigue failure of aluminum foam core usually starts from the semi-closed unit of the lower layer, and the fatigue crack propagates layer by layer along the direction of the maximum shear stress. The results can provide a reference for the practical engineering design and application of AFSP.

• 대한토목학회논문집
• /
• 제34권1호
• /
• pp.167-173
• /
• 2014

석션 매입 앵커(Embedded Suction Anchor; ESA)는 석션 기초(Suction Pile or Caisson)을 이용하여 앵커를 지중에 매설한 후 인발에 저항하는 계류앵커형식이다. 본 연구에서는 ALE (Arbitrary Larangan Eulerian) Adpative Meshing 기법을 이용한 수치해석을 통해 석션 매입 앵커의 인발 거동을 모사하고, 그 결과를 기존 연구에서 수행된 원심모형 실험 및 한계 평형법을 이용한 해석적 방법의 결과와 비교 분석 하였다. 이를 통해 앵커의 수평 연직 경사 방향의 인발 거동을 평가하였으며, 수치 해석 결과, 수평 재하 시 중간 위치에서 가장 큰 저항력을 발휘하는 것으로 나타났다. 연직 재하의 경우 재하 위치와 무관하게 유사한 저항력이 발휘 되었으며, 수평 저항력이 가장 큰 중간 위치에서 경사 하중을 가한 결과 경사각이 증가할수록 인발 저항력이 감소하는 것으로 나타났다.

• 한국습지학회지
• /
• 제13권2호
• /
• pp.161-169
• /
• 2011

본 연구는 여과와 침투기작을 이용한 개선된 여과형 시설의 비점오염물질 처리효율을 평가하고자 수행되었다. 저감시설은 지리학적 기후학적인 인자를 고려하여 기존의 저감시설의 단점을 보완하여 설계되었다. 저감시설의 처리효율 평가는 실험실 규모로 수행되었으며, 3가지 유형의 유속[초기강우(120 mL/min), 일반적인 강우(242 mL/min), 집중호우(500 mL/min)]을 적용하여 실험을 진행하였고, 이를 통하여 수질 분석 및 물수지를 산정하였다. 실험결과, 저감시설의 입자상 물질 제거 효율은 90%이상으로 높게 분석되었다. 3가지의 유속변화 실험 중, 집중호우의 경우에서 11~91% 범위로 낮은 제거효율을 보였는데, 이는 다른 유속에 비해 짧은 체류시간을 갖기 때문으로 판단된다. 또한 저감시설의 물수지 산정결과 침투량은 유출량의 약 1%에 불과하여 향후 저감시설 설계 시, 침투를 증가시키기 위해서 시설하부의 토양치환 등을 통한 침투량 및 저류량을 증가시킬 수 있는 기술적 접근이 필요하며, 이는 오염물질의 저감에 크게 기여할 것으로 판단된다.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제35권4호
• /
• pp.240-247
• /
• 2009

Purpose: The purpose of this study was to evaluate marginal bone loss to the bone crest functionally loaded for up to eighteen months and also with regard to other variables of interest. Material and Methods: 135 endosseous implants(GS II, Osstem, South Korea) were placed in 35 patients. The design of GS II implant is straight with the microthread. Radiographic examinations were conducted at baseline (implant loading) and 3, 6, 9, 12 and 18 months after loading. Marginal bone level measurement was made from the reference point to the lowest observed point of contact of the marginal bone with the fixture. The reference point of the fixture was the border between the blasted surface and machined surface of the fixture. Results: Implants were on function for a mean 12.7 months(range, 3?18 months). For the 56 maxillary and 79 mandibular implants, mean marginal bone loss was 0.68 mm and 0.70 mm. Implants placed maxillary posterior area displayed more crestal bone loss than the other position. The difference between mesial and distal bone levels was statistically significant (p<0.05) with respective means of 0.51 mm and 0.62 mm. Also, The difference between bone graft group and no-bone graft group was statistically significant(p<0.05) with respective means of 0.38 mm and 0.66 mm. But no statistically significant influence of sex, type of surgery(one or two stage surgery), the implant length was observed(p>0.05). Conclusion: This study indicates the amount of marginal bone loss around implant has maintained a relative stable during follow-up periods.