• Journal of Electrical Engineering and Technology
• /
• v.5 no.4
• /
• pp.592-596
• /
• 2010

In a multi-layer interior permanent magnet synchronous motor, the d- and q-axis parameters vary nonlinearly according to different load conditions, consequently changing the level of saturation. The flux-linkage of d- and q-axis conveys ripple characteristics resulting from mechanical structure and degree of magnetic saturation. If the calculated flux-linkage is correct, the torque using the Maxwell stress tensor method is the same torque calculated by the flux-linkage. However, discrepancy between results exists. In this paper, the d- and q-axis flux-linkage, in consideration of the ripple characteristic, is calculated. Simulation results are then compared with experimental results.

• Proceedings of the Technology Innovation Conference
• /
• 1997.12a
• /
• pp.70-88
• /
• 1997

Recently, the interdisciplinary linkage between engineering and social science has received an increasing attention as an emerging education discipline. Due to intrinsic complexity of innovation process and heterogeneity of disciplinary nature, however there exists little, if not no, effort to draw a common framework in terms of educational scope and contents of the new subject. This paper presents a number of criteria and guidelines for building up new educational framework by integrating engineering subject and social science subject. Specifically, three neo-disciplines, technology policy, technology management, and economics of technology are considered since it is postulated that the forementioned disciplines have established academic identity and fundamental structure By nature, this paper is an exploratory and seminal one. It is not the purpose of this paper to provide a concrete table of contents of educational material. Instead, it merely brings up a discussion topic for the wide audience of academic arena, leaving the gradual consensus and convergence as future task.

• Asia pacific journal of information systems
• /
• v.8 no.3
• /
• pp.75-100
• /
• 1998

The paper empirically examines relationships among information infrastructure, competitive advantage of information technology, and corporate performance of small and medium manufacturing firms. Effects of competitive advantage of information technology on the linkage between information infrastructure and corporate performance are investigated. The fact that SME's (Small and Mediem-sized Enterprises) are having difficulties in building their own information infrastructure due to the limitation of capital investment, technology, and manpower is the main motive for the study. Research results confirm that information technology provides several traits of strategic advantages such as efficiency, threat, functionality, preemptiveness, and synergy and significantly contributes to corporate performance. But linkage between information infrastructure and competitive advantage of information technology is proved to be weak and this result suggests that systematic and effective information strategy or planning is required to deliver expected advantages of information technology from information infrastructure investments. Also control effect of competitive advantage of information technology on information infrastructure-corporate performance linkage is not strongly recognized.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.2
• /
• pp.829-837
• /
• 2018

In this paper, a flux linkage model based on four magnetization curves fitting is proposed for three-phase 12/8 switched reluctance motor (SRM), with the analysis of the basic principle of flux detection method and function analysis method. In the model, the single value function mapping relationship between position angle and flux is established, which can achieve a direct estimation of rotor position. The realization scheme of SRM indirect position detection system is presented. It is proved by simulation and experiment that the proposed scheme is suitable for rotor position detection of SRM, and has high accuracy of position estimation.

• Food Science and Biotechnology
• /
• v.18 no.1
• /
• pp.271-274
• /
• 2009

Cereal $\beta$-glucans, linked essentially by mixed $\beta$-(1,4/1,3) glycosidic bonds, were extracted, purified, and structurally identified. Previously chemical structure of barley $\beta$-glucans was characterized from 3 varieties of 'Gang', 'Ohl', and 'Gwangan', and the (1,4)/(1,3) linkage ratio of the $\beta$-glucans was identical. In this study, $\beta$-glucans from 1 barley ('Chal') and 3 oat ('Ohl', 'Samhan', and 'Donghan') varieties were structurally scrutinized, and the linkage pattern of total 7 cereal $\beta$-glucans was compared. The amount of 2 major 3-O-$\beta$-cellobiosyl-D-glucose (DP3) and 3-O-$\beta$-cellotriosyl-D-glucose (DP4) from barley and oat accounted for only 66.6-73.3 and 68.12-81.89% of water-extractable $\beta$-glucan fractions, and the (1,4)/(1,3) linkage ratios of both barley and oat $\beta$-glucans were within very narrow range of 2.27-2.31 and 2.38-2.39, respectively, among the cultivars tested. Structural difference in the cereal $\beta$-glucans was evident when DP3:DP4 ratio in the $\beta$-glucan structure was compared. As a result, this ratio was significantly greater for barley $\beta$-glucan (2.26-2.74) than for oat (1.54-1.66). Chal-B had the greatest DP3 to DP4 ratio among the samples, which in turn reflected the least amount of (1,4)-linkages.

• Journal of Korea Technology Innovation Society
• /
• v.3 no.3
• /
• pp.113-124
• /
• 2000

In the knowledge based economy, it's important to know the place where the proper knowledge locates as well as to produce the creative knowledge. This paper intends to clear up the linkage structure between research fields and its application areas. 2,135 proposals submitted to Korea Science and Engineering Foundation were analyzed to investigate the relationship between research fields and application areas. The results are as follows; first, 51.8% of the basic research is devoted to the advancement of knowledge, second, 40.8％ of that is applicable to the industry, third, 5.8% and 1.2％ of that contributes to environment and social welfare.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.18 no.6
• /
• pp.576-584
• /
• 2009

Up to now, it has been said that no satisfactory computer solution has been found for synthesizing four-bar linkage based on the prescribed coupler link curve. In our study, an algorithm has been developed to improve the design synthesis of four bar linkage based on the 5 precision points method. The suggested algorithm generates the desired coupler curve by using NURBS, and then the generated curve approximates as closely as possible to the desired curve representing coupler link trajectory. Also, when comparing each generated curve by constructing the control polygon, rapid comparison is easily achieved by applying convex hull of the control polygon. Finally, an optimization process using ADS is incorporated into the algorithm based on the 5 precision point method to reduce the total optimization process time. As for examples, two four bar linkages were tested and the result well demonstrated the effectiveness of the algorithm.

• Agribusiness and Information Management
• /
• v.3 no.1
• /
• pp.23-37
• /
• 2011

The development of informatization impacts all sectors, including agriculture. Agricultural informatization builds the knowledge linkage structures of agricultural innovation systems globally. This study investigated the global knowledge linkage structures in agricultural innovation pertinent to information technology (IT) for agricultural research and development (R&D) investments and activities. We explored the longitudinal trend of systemness within the networked research relationships in the triple helix (TH) of the university, industry and government (UIG). We collected data from publications in the Science Citation Index (SCI), the Social Sciences Citation Index (SSCI), and the Arts and Humanities Citation Index (A&HCI) to analyze the TH network dynamics. We also performed a scientometrics analysis to quantitatively identify the knowledge and insights of global agricultural innovation structures. These results could be informative for individual countries. Our findings reveal that the global knowledge linkage structures in the agricultural sector that are pertinent to IT fluctuate widely and fail to increase the capacity of agricultural innovation research due to a neglect of the network effects of the TH dynamics of UIG.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.1
• /
• pp.622-632
• /
• 2018

With the recent changes in the social environment, the growth in the so-called 'five major crimes' has been highlighted as one of the causes of anxiety in Koreans' lives. Many attempts have been made to solve this problem; however, it is still difficult to secure the location information of the socially vulnerable in emergency situations and to precisely identify the features and clothing of criminals and track them using current image analysis technology. Therefore, the development of precision positioning technology and support services along with intelligent security service technology based on spatial information has been given a high priority. This study suggested measures that could be continuously applied to link technologies and services with high linkability by analyzing technologies based on spatial information and other fields. To establish measures for linkage between intelligent security technology and other technologies and services, this study analyzed the existing technologies and research trends in intelligent security technology, and reviewed linkable services according to five criteria established to evaluate their linkability. Based on this analysis, three technologies with high linkability were ultimately selected, and measures for linkage were established. It is expected that the linkage measures derived using the objective evaluation criteria will serve as a stepping stone for promoting active technology linkage and commercialization in the future, even after the completion of this study.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.8 no.3
• /
• pp.221-226
• /
• 2014

The purpose of this study is to suggest improvement directions and analysis of assistive technology service linkage on public benefits in local assistive technology center. The service steps and the main program parts of public benefits linkage in local assistive technology center was identified, and the present status of associated repair works and contact suppliers of assistive technology device in local community was investigated. The result showed the most common level of associated status to provide information of assistive technology devices in public benefits. All the centers provided repair service, and it was typically performed to light maintenance. The centers offered with associated professional repair service supplier for high maintenance service. The connection with assistive technology device supplier appeared a lot of regional difference. Henceforth, the centers will be required to distribute more various assistive technology devices, it is necessary upgrading the quality of information and interaction with the public benefits supporting organizations through its expansion, and it is need to ensure based on policy through the analysis of the effectiveness about linkage.