DOI QR코드

DOI QR Code

Characteristic Analysis for IPMSM Considering Flux-Linkage Ripple

  • Woo, Dong-Kyun (Dept. of Electrical Engineering, Seoul National University) ;
  • Kwak, Sang-Yeop (Dept. of Electrical Engineering, Seoul National University) ;
  • Seo, Jang-Ho (Dept. of Electrical Engineering, Seoul National University) ;
  • Jung, Hyun-Kyo (Dept. of Electrical Engineering, Seoul National University)
  • Received : 2010.02.27
  • Accepted : 2010.04.05
  • Published : 2010.11.01

Abstract

In a multi-layer interior permanent magnet synchronous motor, the d- and q-axis parameters vary nonlinearly according to different load conditions, consequently changing the level of saturation. The flux-linkage of d- and q-axis conveys ripple characteristics resulting from mechanical structure and degree of magnetic saturation. If the calculated flux-linkage is correct, the torque using the Maxwell stress tensor method is the same torque calculated by the flux-linkage. However, discrepancy between results exists. In this paper, the d- and q-axis flux-linkage, in consideration of the ripple characteristic, is calculated. Simulation results are then compared with experimental results.

Keywords

References

  1. R. Y. Tang, “Modern permanent magnet machines theory and design,” Beijing, China Machine Press, 1997.
  2. G. X. Zhou, R. Y. Tang, D. H. Lee, and J. W. Ahn, “Field circuit coupling optimization design of the main electromagnetic parameters of permanent magnet synchronous motor,” JEET, Vol. 3, No. 1, pp. 88-93, Mar. 2008.
  3. Jang-Ho Seo, Chang-Hwan Im, Sang-Yeop Kwak, Cheol-Gyun Lee, and Hyun-Kyo Jung, “An Improved Particle Swarm Optimization Algorithm Mimicking Territorial Dispute Between Groups for Multimodal Function Optimization Problems,” IEEE Trans. Magn., Vol. 44, No. 6, pp. 1046-1049, Jun. 2008. https://doi.org/10.1109/TMAG.2007.914855
  4. E. Levi, “Saturation modeling in dq axis models of salient pole synchronous machines,” IEEE Trans. Energy Conversion, Vol. 14, No. 1, pp. 44-50, Mar. 1999. https://doi.org/10.1109/60.749146
  5. J. R. Hendershot, and T. J. E. Miller, “Design of Brushless Permanent Magnet Motors,” Oxford, 1994.
  6. B. Stumberger, G. Stumberger, D. Dolonar, A. Hamler, and M. Trlep, “Evaluation of saturation and crossmagnetization effects in interior permanent-magnet synchronous motor”, IEEE Trans. Ind. Appl., Vol. 39, No. 5, pp. 1264-1271, Oct. 2003. https://doi.org/10.1109/TIA.2003.816538

Cited by

  1. Analysis and Design of a Multi-Layered and Multi-Segmented Interior Permanent Magnet Motor by Using an Analytic Method vol.50, pp.6, 2014, https://doi.org/10.1109/TMAG.2013.2296568
  2. The Equilibrium Design of Radial Magnetic Force for Reduction of Vibration in IPM type BLDC Motor vol.11, pp.2, 2016, https://doi.org/10.5370/JEET.2016.11.2.377
  3. A 2-D Finite-Element Analysis for a Permanent Magnet Synchronous Motor Taking an Overhang Effect Into Consideration vol.49, pp.8, 2013, https://doi.org/10.1109/TMAG.2013.2248374
  4. Cogging Torque Minimization of a Dual-Type Axial-Flux Permanent Magnet Motor Using a Novel Optimization Algorithm vol.49, pp.9, 2013, https://doi.org/10.1109/TMAG.2013.2256430
  5. Cogging Torque Optimization of Axial Flux Permanent Magnet Motor vol.49, pp.5, 2013, https://doi.org/10.1109/TMAG.2013.2237762
  6. Detailed Design Procedures for PMSG Direct-Driven by Wind Turbines vol.14, pp.1, 2019, https://doi.org/10.1007/s42835-018-00010-y