• Smart Structures and Systems
• /
• v.32 no.1
• /
• pp.1-7
• /
• 2023

In modal analysis, the mode shape reflects the vibration characteristics of the structure, and thus it is widely performed for finite element model updating and structural health monitoring. Generally, the acceleration-based mode shape is suitable to express the characteristics of structures for the translational vibration; however, it is difficult to represent the rotational mode at boundary conditions. A tilt sensor and gyroscope capable of measuring rotational mode are used to analyze the overall behavior of the structure, but extracting its mode shape is the major challenge under the small vibration always. Herein, we conducted a feasibility study on a multi-mode shape estimating approach utilizing a single physical quantity signal. The basic concept of the proposed method is to receive multi-metric dynamic responses from two sensors and obtain mode shapes through bridge loading test with relatively large deformation. In addition, the linear transformation matrix for estimating two mode shapes is derived, and the mode shape based on the gyro sensor data is obtained by acceleration response using ambient vibration. Because the structure's behavior with respect to translational and rotational mode can be confirmed, the proposed method can obtain the total response of the structure considering boundary conditions. To verify the feasibility of the proposed method, we pre-measured dynamic data acquired from five accelerometers and five gyro sensors in a lab-scale test considering bridge structures, and obtained a linear transformation matrix for estimating the multi-mode shapes. In addition, the mode shapes for two physical quantities could be extracted by using only the acceleration data. Finally, the mode shapes estimated by the proposed method were compared with the mode shapes obtained from the two sensors. This study confirmed the applicability of the multi-mode shape estimation approach for accurate damage assessment using multi-dimensional mode shapes of bridge structures, and can be used to evaluate the behavior of structures under ambient vibration.

• Journal of IKEEE
• /
• v.22 no.1
• /
• pp.98-103
• /
• 2018

The CNTFET, which is widely recognized as a next-generation semiconductor, has a structure that can improve performance by positioning CNTs between the source and drain of a conventional MOSFET. However, positioning CNTs increases the complexity of a CNTFET's structure, and the process variation changes the complex structure into various shapes; so, when CNTFET device performance is analyzed, it requires more computation than that of a conventional MOSFET. These problems greatly increase the simulation time necessary for the analysis, and sometimes that analysis cannot be performed using an existing tool; they are therefore important obstacles to designing a circuit using a CNTFET. In this study, we will show that the existing Linear Programming methodology can be utilized to solve the long simulation time problem and discuss the effect of the suggested method in detail. Simulation results show that the Linear Programming method can reduce the number of simulation about 2.5 times when the maximum number of CNT is changed from 6 to 12.

• Korean Institute of Interior Design Journal
• /
• v.14 no.3 s.50
• /
• pp.181-190
• /
• 2005

In accordance with the rapid growth of digital media in 1990s, the state of indetermination that is found in digital process has been emphasized in the field of natural science and philosophy. Digitalized space design has been dramatically developed and it raised heated debate and comment on 'folded space' The purpose of this thesis is to explore how the cognitive-ecological factors constitute fold structures in space design of the late 20th century. Syntax of space structure and geometric composition were analyzed to define what types of cognitive-ecological factors are contrived in the process of visual information. In particular, I put higher theoretical emphasis on what characteristics are ensued in the process of structuring spaces than any other subjects. Through theses analyses and discussions, I raised questions on what principles are operating to create new space design that counts on non-linear structure and its formational process. And I also observed what influences these structural principles of design could fundamentally bring to human beings. First, I proposed that we could overcome reductionist space design through cognitive-ecological approach. Some key concepts such as affordance, parallel processing, and redundancy were adopted as defining elements of non-linear structures. As a result of analyses, I found that the cognitive-ecological approach could substitute the reductionist space design of the past. What is also found is that the three variables are the ultimate ecological elements. In addition, as a methodological concept of fold structures, the form of 'topology' was highlighted because it could be a supporting idea to the cognitive-ecological factors. Second, I claimed that non-linear design is more experiential than rational linear design, and it is more efficiently correspondent to human being than any other forms. What is intended and implied in non-linear structure is also indicated.

• Nuclear Engineering and Technology
• /
• v.53 no.8
• /
• pp.2696-2707
• /
• 2021

The purpose of this study is to investigate the efficiency of various structural modeling schemes for evaluating seismic performances and fragility of the reactor containment building (RCB) structure in the advanced power reactor 1400 (APR1400) nuclear power plant (NPP). Four structural modeling schemes, i.e. lumped-mass stick model (LMSM), solid-based finite element model (Solid FEM), multi-layer shell model (MLSM), and beam-truss model (BTM), are developed to simulate the seismic behaviors of the containment structure. A full three-dimensional finite element model (full 3D FEM) is additionally constructed to verify the previous numerical models. A set of input ground motions with response spectra matching to the US NRC 1.60 design spectrum is generated to perform linear and nonlinear time-history analyses. Floor response spectra (FRS) and floor displacements are obtained at the different elevations of the structure since they are critical outputs for evaluating the seismic vulnerability of RCB and secondary components. The results show that the difference in seismic responses between linear and nonlinear analyses gets larger as an earthquake intensity increases. It is observed that the linear analysis underestimates floor displacements while it overestimates floor accelerations. Moreover, a systematic assessment of the capability and efficiency of each structural model is presented thoroughly. MLSM can be an alternative approach to a full 3D FEM, which is complicated in modeling and extremely time-consuming in dynamic analyses. Specifically, BTM is recommended as the optimal model for evaluating the nonlinear seismic performance of NPP structures. Thereafter, linear and nonlinear BTM are employed in a series of time-history analyses to develop fragility curves of RCB for different damage states. It is shown that the linear analysis underestimates the probability of damage of RCB at a given earthquake intensity when compared to the nonlinear analysis. The nonlinear analysis approach is highly suggested for assessing the vulnerability of NPP structures.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1788-1789
• /
• 2011

In order to develop a one-axis gimbaled acoustic source tracker for mobile robots, a pseudo-linear direction of arrival(DOA) estimator is proposed using a linear ultrasonic sensor array. Under the assumption that the sensor measurement errors are negligible, a linear measurement model is derived using the linear prediction relation of the received sinusoidal acoustic signals. Applying the Kalman filtering technique for this model, the linear recursive DOA estimator is designed. For its linear recursive filter structure, it is preferable for real-time implementation on a commercial DSP. Through the experiments, the effectiveness of the suggested method is demonstrated.

• Journal of Ocean Engineering and Technology
• /
• v.32 no.1
• /
• pp.1-8
• /
• 2018

In order to analyze the response of the offshore structure numerically, the linear potential theory is generally applied for simplicity, and only the radiation damping is considered among various damping forces. Therefore, the results of a numerical simulation can be different from the motion of the structure in a real environment. To reduce the differences between the simulation results and experimental results, the viscous damping, which affects the motion of the structure, is also taken into account. The appropriate damping model is essential for the numerical simulation in order to obtain precise responses of the offshore structure. In this study, various damping models such as linear or quadratic damping and the nonlinear drag force from numerous slender bodies were used to simulate the free decay motion of the platform, and its characteristics were confirmed. The optimized damping model was found by comparing the simulation results to the experimental results. The hydrodynamic forces and wave exciting forces of the structure were obtained using WAMIT, and the free decay test was simulated using OrcaFlex. A free decay test of the scale model was performed by KRISO.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.6
• /
• pp.3121-3142
• /
• 2017

We present a method for 3D shape reconstruction of inextensible deformable surfaces from a single image. The key of our approach is to represent the surface as a 3D triangulated mesh and formulate the reconstruction problem as a sequence of Linear Programming (LP) problems. The LP problem consists of data constraints which are 3D-to-2D keypoint correspondences and shape constraints which are designed to retain original lengths of mesh edges. We use a closed-form method to generate an initial structure, then refine this structure by solving the LP problem iteratively. Compared with previous methods, ours neither involves smoothness constraints nor temporal consistency, which enables us to recover shapes of surfaces with various deformations from a single image. The robustness and accuracy of our approach are evaluated quantitatively on synthetic data and qualitatively on real data.

• Journal of Magnetics
• /
• v.21 no.3
• /
• pp.364-373
• /
• 2016

The article presents the results and findings obtained through the assembly of opposing linear Halbach arrays from two magnet layers using large magnetic blocks from permanent NdFeB magnets, especially concerning the distribution of magnetic induction in an air gap. The use of these large blocks has led to a significant expansion of the area of magnetic field with a substantially higher value of magnetic induction in comparison with similar linear Halbach arrays composed of small magnets. The paper also discusses the determined dependences of magnetic induction on the parameters of the x, y, z coordinate system and indicates the possibilities of achieving an even stronger magnetic field in a larger volume of an air gap for application for instance in equipment for magnetic separation of raw materials, in instrument technologies and in other areas.

• Journal of the Korea Computer Industry Society
• /
• v.4 no.4
• /
• pp.523-532
• /
• 2003

In this paper, we designed a 128-bit block cipher, Lambda, which has 16-round extended Feistel structure and analyzed its secureness by the differential cryptanalysis and linear cryptanalysis. We could have full diffusion effect from the two rounds of the Lambda. Because of the strong diffusion effect of the algorithm, we could get a 8-round differential characteristic with probability $2^{-192}$ and a linear characteristic with probability $2^{-128}$. For the Lambda with 128-bit key, there is no shortcut attack, which is more efficient than the exhaustive key search, for more than 8 rounds of the algorithm.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.8
• /
• pp.38-43
• /
• 2001

We developed a new standing wave type ultrasonic linear motor that can be driven bi-directionally. The operation principle of the motor was derived in an analytical form and the detailed structure was designed by the finite element method. Based on the design, a motor sample and a driving circuit were fabricated, and validity of the structure was verified through experiments.