• 한국해양공학회지
• /
• 제25권1호
• /
• pp.8-13
• /
• 2011

A compact array system of small buoys is used for wave energy extraction. To evaluate the performance of this system, hydrodynamic analysis is carried out in regular waves using the higher order boundary element method. The motion response of each buoy is calculated considering hydrodynamic interactions caused by other buoys. The effect of energy extraction device is modeled as a linear damping load. The efficiencies of energy conversion are compared using the various sizes and arrangements of the array system and the damping coefficients for energy extraction. The increase in size or the packing ratio of the system gives better efficiency. However, the wave condition and the cost for the system should be considered to optimize performance from the perspective of engineering and economics. The proposed nondimensionalized damping coefficient for energy extraction is 0.1~0.5.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1915_1916
• /
• 2009

스테레오 X-선 영상시스템 개발을 위하여 수치적 프로젝션을 획득하는 방법론 및 수치적 팬텀 영상을 고안하고 시험하였다. 오픈소스인 TAKE21을 사용하여 수치적 팬텀을 설계하고 그로부터 프로젝션 이미지를 획득하였다. 스테레오 영상을 위한 평행 원근 투영(Parallel-Perspective) 기하구조에 대한 스테레오 프로젝션 영상을 얻기 위해서 계측기의 계와 선원의 위치에 대해 동차 좌표계(Homogeneous coordinate)에서의 선형변환(Linear Transform)을 적용되는 방식을 이용하였다. 이러한 시뮬레이션은 스테레오 X-선 검색 장치의 설계 및 알고리즘 개발에 유용하게 사용될 수 있을 것이다.

• 한국경영과학회지
• /
• 제26권2호
• /
• pp.13-46
• /
• 2001

SDP (Semidefinite Programming), as a sort of “cone-LP”, optimizes a linear function over the intersection of an affine space and a cone that has the origin as its apex. SDP, however, has been developed in the process of searching for better solution methods for NP-hard combinatorial optimization problems. We surveyed the basic theories necessary to understand SDP researches. First, We examined SDP duality, comparing it to LP duality, which is essential for the interior point method, Second, we showed that SDP can be optimized from an interior solution in polynomial time with a desired error limit. finally, we summarized several research papers that showed SDP can improve solution methods for some combinatorial optimization problems, and explained why SDP has become one of the most important research topics in optimization. We tried to integrate SDP theories. relatively diverse and complicated. to survey research papers with our own perspective, and thus to help researcher to pursue their SDP researches in depth.

• 한국컴퓨터산업학회논문지
• /
• 제8권4호
• /
• pp.263-268
• /
• 2007

본 논문에서는 시불변 전송 채널 및 주파수 선택성 페이딩 채널에서 최소 제곱 평균 알고리즘과 순차적 최소 제곱 알고리즘에 선형 탭 지연선 구조를 도입하여 보상 알고리즘의 제곱 평균 에러 특성을 고찰하였다. 또한 기존의 방식에서 사용하는 단일 탭 갱신 알고리즘과 본 논문에서 제안한 다중 탭 갱신 알고리즘을 비교, 분석하고 이를 수렴 특성 관점에서 고찰하였다.

• Journal of Electrochemical Science and Technology
• /
• 제8권3호
• /
• pp.244-249
• /
• 2017

This paper presents the results of an investigation into the isoamperic point of cyclic voltammograms, which is defined as the singular point where the voltammograms of various scan rates converge. The origin of the unique point is first considered from a theoretical perspective by formulating the voltammetric curves as a system of linear equations, the solution of which indicates that a trivial solution is only available at the potential at which the net current is zero during the reverse potential scan. In addition, by way of a mathematical formulation, it was also shown that the isoamperic point is dependent on the switching potential of the potential scanning. To validate these findings, theoretical and practical cyclic voltammmograms were studied using finite-element based digital simulations and 3-electrode cell experiments. The new understanding of the nature of the isoamperic point provides an opportunity to measure the charge transfer effects without the influence of the mass transfer effects when determining the thermodynamic and kinetic characteristics of a faradaic system.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제2권1호
• /
• pp.51-62
• /
• 2008

This paper proposes a second-order implicit constraint enforcement method which yields enhanced controllability compared to a first-order implicit constraints enforcement method. Although the proposed method requires solving a linear system twice, it yields superior accuracy from the constraints error perspective and guarantees the precise and natural movement of objects, in contrast to the first-order method. Thus, the proposed method is the most suitable for exact prediction simulations. This paper describes the numerical formulation of second-order implicit constraints enforcement. To prove its superiority, the proposed method is compared with the firstorder method using a simple two-link simulation. In this paper, there is a reasonable discussion about the comparison of constraints error and the analysis of dynamic behavior using kinetic energy and potential energy.

• 충청수학회지
• /
• 제33권2호
• /
• pp.237-253
• /
• 2020

This article studies asymptotic stability of non-auto nomous linear systems with time-dependent coefficient matrices {A(t)}_t∈ℝ. The classical theorem of Levinson has been widely used to science and engineering non-autonomous systems, but systems with defective eigenvalues could not be covered because such a family does not allow continuous diagonalization. We study systems where the family allows to have upper triangulation and to have defective eigenvalues. In addition to the wider applicability, working with upper triangular matrices in place of Jordan form matrices offers more flexibility. We interpret our and earlier works including Levinson's theorem from the perspective of invariant manifold theory.

• Structural Engineering and Mechanics
• /
• 제49권6호
• /
• pp.793-810
• /
• 2014

This research work deals with the development of a new Triangular finite element for the linear analysis of plate bending with transverse shear effect. It is developed in perspective to building shell elements. The displacements field of the element has been developed by the use of the strain-based approach and it is based on the assumed independent functions for the various components of strain insofar as it is allowed by the compatibility equations. Its formulation uses also concepts related to the fourth fictitious node, the static condensation and analytic integration. It is based on the assumptions of tick plate.s theory (Reissner-Mindlin theory). The element possesses three essential external degrees of freedom at each of the four nodes and satisfies the exact representation of the rigid body modes of displacements. As a result of this approach, a new bending plate finite element (Pep43) which is competitive, robust and efficient.

• Computers and Concrete
• /
• 제11권6호
• /
• pp.515-529
• /
• 2013

The moment-curvature relation for simple bending is a well-studied subject and the classical moment-curvature diagram is commonly found in literature. The influence of axial forces has generally been considered as compression onto symmetrically reinforced cross-sections, thus strain at the reference fiber never has been an issue. However, when dealing with integral structures, which are usually statically indeterminate in different degrees, these concepts are not sufficient. Their horizontal elements are often completely restrained, which, under imposed deformations, leads to moderate compressive or tensile axial forces. The authors propose to analyze conventional beam cross-sections with moment-curvature diagrams considering asymmetrically reinforced cross-sections under combined influence of bending and moderate axial force. In addition a new diagram is introduced that expands the common moment-curvature relation onto the strain variation at the reference fiber. A parametric study presented in this article reveals the significant influence of selected cross-section parameters.

• 산업경영시스템학회지
• /
• 제34권3호
• /
• pp.97-105
• /
• 2011

Previous researches have focused on the efficiency of project execution and the satisfaction of internal customers In view of the fact that a project is successful if any defects are not found in the short-term performance test of the project final outcome. To execute a project that both internal customer and external customer are satisfied in terms of longer-term benefit perspective, the project claim costs (PCC) which may occur for the warranty period of the project final outcome should be considered. We propose a model included PCC to the linear programming between time and cost to expedite a project and perform the validity test by applying the model to an example project. This model and related procedure will contribute to overall project activities' cost reduction by taking preventive actions for PCC.