• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.05a
• /
• pp.249-253
• /
• 2003

In recent years, developments of light weight vehicle are one of the most important issues in automotive makers. New materials and new processes have been studied on the point of weight saving of chassis worldwide. Associated with materials, applications of high strength steel, aluminium, magnesium are being developed. On the point of new processes, tailored welded blank and hydroforming have been applied. In this paper, focusing to both material and process, we have applied hydroforming process to the engine cradle. In addition to that, three kinds of high strength steel have been applied to the development of light weight material for hydroforming. All the studies have been carried by FEM.

• Journal of the Korean Society of Systems Engineering
• /
• v.9 no.1
• /
• pp.1-11
• /
• 2013

In this study, unattended Light Rail Transit System (K-AGT) is a general-purpose standards safety requirements of IEC 62267 based System Engineering Process (SEP) was used. Functional analysis and physical architecting for each requirements through the vehicle was classified into sub-systems, design was analyzed in terms of SE. The analysis of the proposed system engineering process, unattended train operation (UTO), driverless train operation(DTO) design of the safety measures to be used as the basis is studied.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.10 no.6
• /
• pp.117-124
• /
• 2002

For the correct estimation of air pollutant emission from automobiles which is the largest contributor of metropolitan area air pollution, the total pollutant emission from automobiles should be estimated accurately. Nationwide emissions from automobiles, such as CO, HC and NOx, are calculated by using emission factor and total VMT(vehicle miles traveled). The emission factors were derived from the emissions data on chassis dynamometer with test modes which represent the real driving patterns. In the present study, test modes to derive the emission factors for light duty vehicles are developed by using the real driving pattern data for the urban, suburban and express way.

• Journal of Auto-vehicle Safety Association
• /
• v.3 no.2
• /
• pp.11-16
• /
• 2011

In recent years, rapid-increasing market share of compact cars and SUVs has brought for both consumer and automaker to pay more attention on crash compatibility between the compact passenger vehicles and the light trucks (i.e., Pickups and SUVs). Vehicle compatibility regarding both self and partner protection in frontal crash of different class vehicles is one of hot issues in vehicle safety. Furthermore, it is expected that the amendment of UNECE-Regulation 94 to implement compatibility issues in couple of coming years. In this study, conceptual design of compatibility compliant frontal vehicle structure which subjects to improve? the distribution of frontal crash loading and structural engagement between vehicles is introduced. The effects of proposed vehicle structure on both possible candidates (i.e. FWRB, FWDB and PDB) for a compatibility evaluation test procedure and car-to-car crash are also investigated.

• Steel and Composite Structures
• /
• v.24 no.3
• /
• pp.351-358
• /
• 2017

Due to the increasing competition, automotive manufacturers have to manufacture highly safe and light vehicles. The parts which make up the body of the vehicle and absorb the energy in case of a crash, are usually manufactured with sheet metal forming methods such as deep drawing, bending, trimming and spinning. The part may get thinner, thicker, folded, teared, wrinkled and spring back based on the manufacturing conditions during manufacturing and the type of application methods. Transferring these effects which originate from the forming process to the crash simulations that are performed for vehicle safety simulations, makes accurate and reliable results possible. As a part of this study, firstly, the one-step and incremental sheet metal forming analysis (deep drawing + trimming + spring back) of vehicle front bumper beam and crash boxes were conducted. Then, crash performances for cases with and without the effects of sheet metal forming were assessed in the crash analysis of vehicle front bumper beam and crash box. It was detected that the parts absorbed 12.89% more energy in total in cases where the effect of the forming process was included. It was revealed that forming history has a significant effect on the crash performance of the vehicle parts.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.24 no.3
• /
• pp.293-301
• /
• 2021

LTV(Light Tactical Vehicle) operating in our military requires higher levels of performance and durability to withstand harsher conditions than general vehicles, as they must travel on both rough-train and off-road as well as on public roads. Recently, LTV development is demanded a variety of test evaluations in order to satisfy ROC (Required Operational Capability) by the military requirement. However, there is no informations of driving test course for satisfying the durability performance of Korean tactical vehicle. Therefore, this study aims to provide basic data to establish reliable drive test conditions by analyzing the main maneuvering test site at the domestic and foreign country in order to select the representative drive course. These studies will provide a more scientific and systematic evaluation solution for the development of tactical vehicles, and can be effectively used to establish a certified system for military vehicle test evaluation in the future

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.6
• /
• pp.689-695
• /
• 2018

This paper presents the means of controlling the regeneration of a diesel particulate filter (DPF) that is mounted on tactical vehicles to satisfy exhaust gas standards. The DPF captures particulate matter in the exhaust gas and combusts the captured particulate matter. This process is regeneration, which is essential to the normal performance of the DPF. Bad regeneration causes degradation of vehicle performance; worse, it can lead to a vehicle fire. DPF regeneration is performed by control logic. If the regeneration control logic does not properly reflect the operating characteristics of the vehicle, DPF regeneration may not occur. Consequently, it is very important to ensure the DPF operates properly by reflecting the operating characteristics of the tactical vehicle. This study analyzes the operational characteristics of a tactical vehicle and the DPF, and adds proper DPF regeneration control logic. Additionally, this study is intended to simultaneously improve the additional problems that may occur from operating under the added regeneration control logic.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1995.04a
• /
• pp.316-323
• /
• 1995

This paper presents an image processing technique to get traffic information such as vehicle volume, velocity, and occupancy for measuring the traffic congestion rate. To obtain these information, two horizontal lines are previously set on the screen. A moving vehicle is detected using the gray level difference on each line, and also template matching method at night. Threshold values are determined by sampling pavement grey level, and updated dynamically to cope with the change of ambient light conditions. These technique is successfully used to calculate vehicle volume, occupancy, and velocity. This study can be applied to traffic signal control system for minimizing traffic congestion in urban areas.

• Proceedings of the IEEK Conference
• /
• 1998.06a
• /
• pp.219-222
• /
• 1998

This paper presents the Mixed H2/H$\infty$ controller design method with the regional pole placements for underwater vehicle. Since the small and light underwater vehicle is sensitive to disturbances and parameter uncertainties, we design the controller which guarantees robustness against time-delays, parameter uncertainties and disturbances. The LMI(linear matrix inequality) formulations for pole placements in specific regions and H2 and H$\infty$ performances are reviewed. The desired controller can be obtained by solving these LMIs.

• Journal of Auto-vehicle Safety Association
• /
• v.14 no.2
• /
• pp.14-19
• /
• 2022

This paper presents motion planning algorithm that yields to intervening side lane vehicles in a congested traffic flow based on vehicle to vehicle (V2V) communication. Autonomous driving in dense traffic situation requires advanced driving performance in terms of vehicle interaction and risk mitigation. One of the most important functions necessary for congested traffic autonomous driving is to predict the lane change intention of the side lane target vehicle. However, implementing this function by using only environmental sensors has limitations. In this study, V2V communication is used to overcome the limitations and determine the intention of cut-in vehicles. Lane change intention of the intervening side lane vehicle is inferred by its longitudinal speed, steering angle, and turn signal light information received by the on-board-unit (OBU). Once the yield decision is made, the subject vehicle decelerates to generate sufficient clearance for the target vehicle to enter. Validation of the algorithm was conducted with actual autonomous test vehicles.