• 대한토목학회논문집
• /
• 제33권1호
• /
• pp.261-272
• /
• 2013

경량전철(LRT: Light Rail Transit)은 중량전철에 비해 많은 장점을 가진 효과적인 대중교통수단이다. 따라서 많은 지자체에서 도입을 추진하고 있고, 부산광역시에서는 이미 반송선과 부산김해경전철 등 2개 노선을 국내 최초로 무인운행방식으로 도입하여 운행중에 있다. 본 연구는 이렇게 도입된 경전철과 관련한 이용자 측면의 서비스 만족도를 분석하고, 부족한 부분을 보완하여 경전철의 서비스를 개선해 나가는 데 우선순위를 제시하였다. 본 연구에서는 실제 무인자동운전 경량전철(부산김해경전철과 반송선)의 이용자를 대상으로 설문조사를 실시하여 경량전철에 대한 안전성 의식과 서비스에 대한 이용만족도를 파악하고, 구조방정식 기법을 활용하여 두 개의 서비스 이용만족도 모형(반송선모형과 부산김해경전철모형)을 구축하여 비교 분석하였다. 분석 결과 이용자 중심의 경전철 서비스 개선대책과 우선순위를 도출하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 추계학술대회 논문집(II)
• /
• pp.98-103
• /
• 2003

Recently, to solve the urban transportation problem, the introduction of Light Rail Transit system has been proceeded positively. therefore, development of the Korean standard LRT system in which safety, efficiency and cost effectiveness are emphasized. The Korea Railroad Research institute study on Rubber Tired AGT system of Light Rail Transit to obtain the essential technology and engineering know-how, which leads lower LRT construction cost. In the development procedure, SE(system Engineering) is needed for combination of subsystem and optimum operation effect. This study is focused on the interface of LRT subsystem(Development of the rubber tired LRT, Power supply system, signalling and train control system, Elevated track structure for the rubber tired LRT), a important part of SE, to develop of the driverless LRT system and establish the test and evaluation.

• 시스템엔지니어링학술지
• /
• 제8권2호
• /
• pp.1-10
• /
• 2012

This paper aims to analyze the result of SE Process Implementation on Light Rail Transit(LRT) Project. Currently the Light Rail Transit Project of Korea applies SE to the intermediate phase, that is, E&M phase which is a manufacturing and designing procedure. More seriously, the application effect of SE is not remarkable because it applies to some specific engineering fields like RAMS and it depends on superficial consulting of foreign companies with low SE support capability and investment capital. This study points out that the "Requirement Analysis" and "System Alternative Review" has not been conducted from the initial phase (basic plan and basic design) of the LRT projects. Several projects indicate that the amount of investments for SE activities through the Korea LRT project is relatively very small in comparison with the global capital which is about 10% of total project budget. Furthermore, Korea LRT projects have very few SE professionals and weak SE organization with no government directions and guide book for the efficient implementation of SE for the LRT projects.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 추계학술대회 논문집(II)
• /
• pp.135-140
• /
• 2003

Recently Light Rail Transit(LRT) systems, especially full automatic systems are strongly issued by many provinces and major cities due to it's own characteristic for economical, environmental and sufficient transportation capacity. But LRT design criteria should be modified according to Rolling Stock's properties. -size, arrangement of bogie and wheel, power of traction motor etc, This thesis suggest for basic standard design criteria of Rubber Tired Light Rail Transit system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1181-1182
• /
• 2007

Light Rail Transit (LRT) System is an urban transit system which has approximately an intermediate transportation capacity between conventional subway and bus ($5,000{\sim}25,000$ persons per hour and per direction). It is a high-tech system which operational capacity, punctuality and mobility are remarkably improved. There are some types of LRT systems such as monorail, tramway, AGT(Automated Guideway Transit), and so on. The LRT systems have been applied and being operated in about a hundred lines around the world and many projects that apply the LRT systems in Korea are being proceeded and scheduled. For the efficient management, economical construction, and safe operation of various LRT systems, the establishment of national standard is necessary such as vehicle standardized specification, vehicle performance test standard, vehicle safety standard, construction guide, operation regulation, etc. of LRT systems. This paper presents the standard specification of electrical equipment of linear induction motor type light rail vehicle, that is LIM AGT(AGT system propelled with linear induction motor) vehicle. The LIM AGT system has been applied in Japan subway and ART(Advanced Rapid Transit) system of Canada and Yongin LRT is currently under construction.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1999년도 추계학술대회 논문집
• /
• pp.27-34
• /
• 1999

To solve the metropolitan traffic problem, it is urgently needed to introduce new transportation system in Korea. The Light Rail Transit(LRT) can offer passenger capacity in the 5,000 to 20,000 per hour range. The LRT offers a fast, frequent and comfortable service to passenger, with service intervals of S minutes or less at peak times. This frequent and convenient service should give confidence to Koreans as a good riders. Now, it's time to introduce this LRT into Korea. Chonju will be the first city with LRT in Korea.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1195_1196
• /
• 2009

Light rail transit is classified to rubber-tired LRT, lear induction motor LRT, steel wheel LRT, monorail and tramway. LRT except for tramway are usually operated without driver and tramway are driven depending on driver's sight like usual car. LRT, which is one type of urban guided transit, shall be operated according to domestic "Operational Regulation for Urban Guided Transit" but existing regulation does not contain the safety related codes for driverless operation. In this paper, we investigate "IEC 62267 : Railway Application-Safety Requirements for Automated Urban Guided Transit" and compensate for existing operational regulation by referring to international standard and operational rule of commercial line.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.1556-1562
• /
• 2011

Recently many disadvantageous problems have been found during the process of domestic LRT(Light Rail Transit) projects and that can influence negative effects on the development of domestic railway. Since many projects have been progressed while having few original technologies, it is no exaggeration to say that they are being built unreasonable railway which lacks economic feasibility. The on-going LRT projects which are being carried out by the central or local government have a tendency to favor the systems and rolling stocks that have been approved by other countries through years of experience, therefore it can be said that we are having few chances to develop original technologies. In this study, we would like to promote railway development and jump up to the level of advanced railway standards through developing our unique and independent future LRT technology.

• 시스템엔지니어링학술지
• /
• 제7권2호
• /
• pp.13-19
• /
• 2011

A LRT(Light Rail Transit) is one of the Future Urban Railway Development Project. The project's goal is to reduce a transportation congestion in the center of the city. New transportation is intensely required in order to overcome a limit of the ground transportation that is the existing public transportation, A LRT(Light Rail Transit) construction project to be based on an unmanned driving system is the large composition system that a vehicle, a signal, communication, electric, track etc. were organically integrated as echo-friendly urban transportation systems. It also put a huge budget, which is a large-scale infrastructure projects. It is international trend that Light Rail Transit projects apply a technique in System Engineering for a schedule, cost, quality elevations, and to approach in viewpoints of life-cycle from initial construction steps to operation, abolition. This paper intends to analyze RAM requirements taking into consideration ISO/IEC 15288 throughout life-cycle from concept, design, manufacture, operation and maintenance to the final phase, decommissioning, and the study seeks to suggest directions of efficient use to domestic LRT projects.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.1743-1753
• /
• 2011

Seoul Metropolitan Government has performed alternative transit system, light rail transit(LRT), for settling the problems of urban public transit system based on conventional bus service and heavy rail transit(HRT). LRT projects of total 8 lines(about 73.6km), including Ui-Sinseol line, have been planned as Build-Transfer-Operate(BTO) projects. For the first LRT, Ui-Sinseol line, however, design of structure had met standard for design of HRT, because of no domestic design code for LRT when participates of Ui-Sinseol project submitted the design proposal. This case study reports a successful example of LRT design minimizing the scale of stations designed in base of HRT code. The problems, like oversized structures compared with LRT vehicles, excessive costs for construction, had been resolved through negotiations with the participates of Ui-Sinseol line. Result suggests that present and future costs for construction and maintenance of the LRT projects in Seoul be considerably reduced in advance.