• Journal of Sensor Science and Technology
• /
• v.23 no.4
• /
• pp.245-250
• /
• 2014

When the charged particle travels in transparent medium with a velocity greater than that of light in the same medium, the electromagnetic field close to the particle polarizes the medium along its path, and then the electrons in the atoms follow the waveform of the pulse which is called as Cerenkov light or radiation. This type of radiation can be easily observed in a spent fuel storage pit. In optical fibers, the Cerenkov light also can be generated due to their dielectric components. Accordingly, the radiation-induced light signals can be obtained using optical fibers without any scintillating material. In this study, to measure the intensities of Cerenkov radiation induced by gamma-rays, we have fabricated the fiber-optic Cerenkov radiation sensor system using silica optical fibers, plastic optical fibers, multi-anode photomultiplier tubes, simulated spent fuel assembly and a scanning system. To characterize the Cerenkov radiation generated in optical fibers, the intensities of Cerenkov radiation generated in the silica and plastic optical fibers were measured. Also, we measured the longitudinal distribution of gamma rays emitted from the Ir-192 isotope by using the fiber-optic Cerenkov radiation sensor system and simulated spent fuel assembly.

• Korean Journal of Environment and Ecology
• /
• v.12 no.1
• /
• pp.9-13
• /
• 1998

Because Lysimachia mauritiana is not able to maintain the seed viablity for a long time, it has difficulties in using for the ornamental plants or landscape gardening. This study was conducted to elucidate the optimal germination conditions of Lysimachia mauritiana seeds. The germination rate of the seeds was higer in light condition than in dark one. In experment determining the proper germination temperature, the germination rates were 2.2%, 96.9% and 91.2% under 35$\circ $C, 25$\circ $C, and 20$\circ $C, respectively in light condition. The approprate temperature for the germination was 25$\circ $C in light. The decreases of germination rate with the increase of the preservation periods was able to recover by priming pretreated with NaCl solution and KNO$_{3}$ + K$_{3}$H$_{2}$PO mixed solutions. When the storage period was 300 days, the germination rate was 75% without priming treatments. But the seeds primed with NaCl 0.1M and KNO$_{3}$ + K$_{3}$H$_{2}$PO mixed solutions 0.1M, showed germination rate above 90%. T$_{50}$ also was shorten from 5.25 without priming to 3.78 with NaCl 0.1M. Seed priming may induce earlier sprouts and increase germination rate of long-preserved seeds of native wild plants.

• Restorative Dentistry and Endodontics
• /
• v.34 no.5
• /
• pp.450-459
• /
• 2009

The aim of this study was to measure the initial dynamic modulus changes of light cured composites using a custom made rheometer. The custom made rheometer consisted of 3 parts: (1) a measurement unit of parallel plates made of glass rods, (2) an oscillating shear strain generator with a DC motor and a crank mechanism, (3) a stress measurement device using an electromagnetic torque sensor. This instrument could measure a maximum torque of 2Ncm, and the switch of the light-curing unit was synchronized with the rheometer. Six commercial composite resins [Z-100 (Z1), Z-250 (Z2), Z-350 (Z3), DenFil (DF), Tetric Ceram (TC), and Clearfil AP-X (CF)] were investigated. A dynamic oscillating shear test was undertaken with the rheometer. A certain volume ($14.2\;mm^3$) of composite was loaded between the parallel plates, which were made of glass rods (3 mm in diameter). An oscillating shear strain with a frequency of 6 Hz and amplitude of 0.00579 rad was applied to the specimen and the resultant stress was measured. Data acquisition started simultaneously with light curing, and the changes in visco-elasticity of composites were recorded for 10 seconds. The measurements were repeated 5 times for each composite at $25{\pm}0.5^{\circ}C$. Complex shear modulus G*, storage shear modulus G', loss shear modulus G" were calculated from the measured strain-stress curves. Time to reach the complex modulus G* of 10 MPa was determined. The G* and time to reach the G* of 10 MPa of composites were analyzed with One-way ANOVA and Tukey's test ($\alpha$ = 0.05). The results were as follows. 1. The custom made rheometer in this study reliably measured the initial visco-elastic modulus changes of composites during 10 seconds of light curing. 2. In all composites, the development of complex shear modulus G* had a latent period for $1{\sim}2$ seconds immediately after the start of light curing, and then increased rapidly during 10 seconds. 3. In all composites, the storage shear modulus G" increased steeper than the loss shear modulus G" during 10 seconds of light curing. 4. The complex shear modulus of Z1 was the highest, followed by CF, Z2, Z3, TC and DF the lowest. 5. Z1 was the fastest and DF was the slowest in the time to reach the complex shear modulus of 10 MPa.

• Analytical Science and Technology
• /
• v.24 no.3
• /
• pp.212-218
• /
• 2011

In this study, temporal stability of 5 reduced sulfur compounds (RSCs) including ($H_2S$, $CH_3SH$, DMS, $CS_2$, and DMDS) was investigated up to 30 days. To learn the temporal changes in RSC concentration levels, two types of long-term storage experiment were carried out by employing two different approaches for sample storing in Tedlar bag samplers. The first one named as a forward (F) storage method consists of preparing all samples in the beginning of experiment. All these samples were analyzed sequentially through time. The second approach named as a reversed (R) storage method was carried out by preparing each sample through time and by analyzing all of them in the last day. For these experiments, RSC standards were prepared at 10 ppb in 10 L Tedlar bag. The results of both methods were consistent enough to show a tendency of the concentration reduction through time. Moreover, the lightest RSC, $H_2S$ showed the most significant reduction of 84.8% at the end of experiment. To validate difference between these results, t-test was applied to the data obtained between the two methods at 90% significance level. According to t-test, the results of the two approaches were greatly distinguished from 3 RSCs ($H_2S$, $CH_3SH$, and DMDS). The results also indicated that the temporal reduction of RSC differs greatly between light ($H_2S$ and $CH_3SH$) and heavy RSCs (DMS, DMDS, and $CS_2$). The former generally exhibited much significant reduction through time due probably to their lower stability.

• The Research Journal of the Costume Culture
• /
• v.7 no.2
• /
• pp.315-322
• /
• 1999

The acquistion and dyeability of the Gardenia jasminoides were examined to establish the optimum condition for extraction and storage in the process of obtaining the natural dye, Gardenia jasminoides colorant. Also the dyeability and colorfastness of Gardenia jasminoides were investigated. The results of this study are as follows. The optimum part-removed seed. In all experiments, the part of fat-removed seed and pericarp was used. The optimum condition for extraction of Gardenia jasminoides colorant was at 40℃ and for 90 min. in methanol. As storage temperature was higher, the absorbance of colorant extract decreased rapidly. The Gardenia jasminoides colorant exhibited dyeability to cotton, silk, wool, and nylon. The dyeability was the greatest in wool, and then nylon, silk, and cotton. Both wool and nylon had the greatest K/S value at pH3, however, nylon and cotton at pH 6 and pH 8 respectively. In addition, the increase in K/S value corresponded to temperature in wool and nylon, but the silk and cotton had the greatest K/S value at 60℃. Also, the K/S value increased in concomitant with the increased number of dyeing repetition. In the most cases, colorfastness of light was weak but colorfastness of laundry, sweat was relatively excellent.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2003.10a
• /
• pp.336-339
• /
• 2003

A digital data logging system has been developed for the purpose of a compact offline Ocean Bottom Seismometer(OBS). The Digital Data Logger(DDL) consists of A/D system, Micom with storage memory and firmware managing data files. The A/D system acquires data of 16bit/4ch with sampling rate of 250Hz per channel. The Micom, a micro controller board with T33521 processor of 8051 class, was equipped with 8 flash memories of 128MB for data storage capacity of 1GB. The firmware stores the acquiring data in form of binary files. The DDL was designated to be compact and light and to consume low energy as possible. The DDL is to interface with PC through USB(Universal Serial Bus). The performance of the DDL has been validated through tests with respect to a 3-axis seismometer.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.14 no.6
• /
• pp.481-487
• /
• 2009

This paper proposes a regulation method of DC line voltage for urban transit system fluctuated during the acceleration or deceleration by using supercapacitor. Supercapacitor is modelled electrically under the assumption of three different time constants of RC circuits with variable capacitances depending on the voltage. And its parameters are determined by the experimental measurements. The energy storage system using supercapacitors is installed based on this model, and the proposed model is tested through the simulations and experiments, and the controller for charging and discharging is designed. Finally, it is tested at Kyoungsan test site for the urban light rail road system and the energy saving effect is evaluated economically.

• International Journal of Internet, Broadcasting and Communication
• /
• v.8 no.3
• /
• pp.12-24
• /
• 2016

Recently, as the price per bit is decreasing at a fast rate, flash memory is considered to be used as primary storage of large-scale database systems. Although flash memory shows off its high speeds of page reads, however, it has a problem of noticeable performance degradation in the presence of increasing update workloads. When updates are requested for pages with random page IDs, in particular, the shortcoming of flash tends to impair significantly the overall performance of a flash-based database system. Therefore, it is important to have a way to efficiently update the B+-tree, when it is stored in flash storage. This is because most of updates in the B+-tree arise at leaf nodes, whose page IDs are in random. In this light, we propose a new flash B+-tree that stores up-to-date versions of leaf nodes in sibling-leaf blocks (SLBs), while updating them. The use of SLBs improves the update performance of B-trees and provides the mechanism for fast key range searches. To verify the performance advantages of the proposed flash B+-tree, we developed a mathematical performance evaluation model that is suited for assessing B-tree operations. The performance comparisons from it show that the proposed flash B+-tree provides faster range searches and reduces more than 50% of update costs.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.8
• /
• pp.1270-1281
• /
• 1989

This paper presents two new storage schemes of 3-D objects to accelerate the finding of the first intersecting object and the shadow computation steps in ray tracing. The 3-D objects which are potentially intersected with the first reflection (refraction)ray are enrolled within a so called reflection (refraction) frustum' for a polygon object. Only those objects registered in the corres ponding frustum are immediately checked for intersection with the secondary rays emanating from the same polygon. The other is called a shadow pyramid' which contains the candidate objects possibly blocking the path from the relevant light source to any point on the relevant polgon. The shadow testing of a point is performed only against the objects contained in the associated shadow pyramid. Despite the cost needed for registration of objects within frusta or shadow pyramids, the total rendering time of ray tracing using the proposed approaches was reduced by approximately 50% (10% in color rendering time and 70% in shadoe testing time) from the conventional cell 50% (10% in color rendering time and 70% in shadow testing time) from the conventional cell traversal scheme under the 3-D uniform subdivision environment due to the fast finding of candidate objects for intersection and the reduced number of intersection calculations.

• Fashion & Textile Research Journal
• /
• v.8 no.6
• /
• pp.634-638
• /
• 2006

The significance of this study is the demonstration of a new method of preservation procedure for national-treasure-class cultural-assets by examining the characteristics of the Jeogori relic, presumed to be that of King SeJo, and validating the preservation process. This Jergori as well as the wooden Munsu-donja Buddha statue from which they were found are designated as national treasure. The Jeogori relic is made of light silk and dimensions mark 77 cm in length, 67 cm in width, and 94 cm in sleeve length. It is a typical Jeogori worn in the Chosun Dynasty. Preservation procedure was in the following order: Removing dust and pollutants by vacuum, washing, removing creases, reinforcing the clothes, settling at paulownia backboard, and packing. Storage and exhibition of remains was executed with as minimal folding as possible, and microbiological damage prevention was performed by dyeing antibacterial treatment with eugenol onto supporting cloth. The relic, conservatively treated in accordance with the above procedure, is currently kept at the storage facility of the citadel Museum in the Woljeong Temple. It is displayed annually to the general public for approximately two weeks.