• Journal of Ecology and Environment
• /
• v.38 no.3
• /
• pp.327-334
• /
• 2015

We investigated the current and potential spatial distributions and habitable areas of Biston robustum and Camellia japonica in South Korea in order to provide useful data for the conservation of C. japonica and minimize the damage caused by B. robustum. It was predicted that, by 2070, although B. robustum would be widely distributed throughout the Korean Peninsula, except for the western and eastern coastal areas, it would be narrowly distributed along the Sokcho-si and Goseong-gun coastlines in Gangwon Province. C. japonica is currently located along the southern coastline but its critical habitable area is predicted to gradually disappear by 2070. Assessment of the potential distribution probabilities of B. robustum and C. japonica revealed that the area under the curve (AUC) values were 0.995 and 0.991, respectively, which indicate high precision and applicability of the model. Major factors influencing the potential distribution of B. robustum included precipitation of wettest quarter and annual precipitation (BIO16 and BIO12), whereas annual mean temperature and mean temperature of wettest quarter (BIO1 and BIO8) were important variables for explaining C. japonica distribution. Overlapping areas of B. robustum and C. japonica were $11,782km^2$, $5447km^2$, and $870km^2$ for the current, 2050-predicted, and 2070-predicted conditions, respectively, clearly showing a dramatic decrease in area. Although it is predicted that B. robustum would cause continuous damage to C. japonica in the southern part of the Korean Peninsula, such impacts might diminish over time and become negligible in the future.

• The Korean Journal of Community Living Science
• /
• v.24 no.2
• /
• pp.251-258
• /
• 2013

Korean oil and honey Yukwa has been paid attention as formal cake for traditional national seasons' holiday and religious service. Quality of Yukwa, however, has been maintained arbitrarily by each Yukwa manufacturer. Since even same Yukwa had severe differences in size, weight, and pattern, it has given the negative effect to the consumer. Yukwa industries need to setup the quantitative quality specifications instead of qualitative ones to maintain the uniformity of Yukwa quality. Efficient and economical inspection and process control system should be developed. In developing quality standards of Yukwa, features which can measure quality quantitatively in real time should be properly chosen. Existing quality features such as acidity, oxidization, hardness, viscosity, and texture were measured by the chemical or physical base destructive methods. Many research and developments have been performed in investigating and analyzing chemical transition states of those quality features as environment or storage condition changes. Most methods, however, require either off-line or complex treatment or time consuming process of analysis in evaluating quality features. Consumer, however, selects products mostly based on the external features such as shape, size, and color. Therefore, critical visual quality features should be chosen and the efficient real time measurement system must be developed. In this paper, computer image acquisition and processing system were developed and software modules were developed to extract the quantitative data of those features in real-time. Computer image processing system will promote in maintaining uniform quality of Yukwa and establishing quality standards of Yukwa.

• Hwankyungkyoyuk
• /
• v.20 no.2
• /
• pp.67-77
• /
• 2007

The purpose of this study is to investigate the change in ecological footprint made by the eco-friendly consumer education program, and ultimately, to help the high school students, future consumers, have eco-friendly attitude. This study will be contributed to helping them to understand the importance of the eco-friendly consumption and the seriousness of the environmental problems arising from their bad consumption habit, to get interested in the environmental problems in daily lives, and to reduce the ecological footprint through the eco-friendly habit acquired when young. This study is designed to have 60 high school students experience the eco-friendly consumer education program for 10 months and compare the levels of each ecological footprint though two different Questionnaires in five sections: housing, food, transportation, purchase, and waste. The program used in this research consists of three parts: eco-friendly attitude education for consumers, eco-friendly citizen education for consumers, and eco-friendly resource management education for consumers. The data are analyzed by SPSS Window 10.0 program. The findings are as follows: First. The eco-friendly consumer education is more likely to help the students develop critical thought and eco-friendly attitude, unlike the economy-related consumer education. Second. The level of ecological footprint is significantly decreased in the group with the eco-friendly consumer education program. compared to the group without it. Third. Experiencing the eco-friendly consumer education program helps the students have the positive attitude on ecology and lead an environmentally sustainable consumer life. The results show that eco-friendly consumer education can make a contribution to raising the good citizens who have eco-friendly attitude and behavior, lead sustainable consumer life, and try to reduce the level of ecological footprint.

• Steel and Composite Structures
• /
• v.36 no.1
• /
• pp.75-86
• /
• 2020

The grid structures with welded hollow spherical joint (WHSJ) have gained increasing popularity for use in industrial buildings with suspended cranes, and usually welded with steel tube (ST). The fatigue performance of steel tube-welded hollow spherical joint (ST-WHSJ) is however not yet well characterized, and there is little research on fatigue life prediction methods of ST-WHSJ. In this study, based on previous fatigue tests, three series of specimen fatigue data with different design parameters and stress ratios were compared, and two fatigue failure modes were revealed: failure at the weld toe of the ST and the WHSJ respectively. Then, S-N curves of nominal stress were uniformed. Furthermore, a finite element model (FEM) was validated by static test, and was introduced to assess fatigue behavior with the hot spot stress method (HSSM) and the effective notch stress method (ENSM). Both methods could provide conservative predictions, and these two methods had similar results. However, ENSM, especially when using von Mises stress, had a better fit for the series with a non- positive stress ratio. After including the welding residual stress and mean stress, analyses with the local stress method (LSM) and the critical distance method (CDM, including point method and line method) were carried out. It could be seen that the point method of CDM led to more accurate predictions than LSM, and was recommended for series with positive stress ratios.

• Asian-Australasian Journal of Animal Sciences
• /
• v.27 no.8
• /
• pp.1196-1203
• /
• 2014

This study intended to compare the productive performance of three different layer raising systems; conventional cage (CC), barn (BR) and aviary (AV). The AV is welfare bestowed housing that allows free locomotion for birds within the BR. The BR allows bird's free locomotion inside BR but without multilevel structures. Both pullets and cockerels were housed together in both AV and BR, but only pullets in CC. Seventeen weeks old Lohmann Brown Lite (n = 800) pullets were housed in AV during this study. The same age layer pullets were simultaneously assigned to either at CC or BR to compare egg production performance with AV. The duration of experiment was 40 weeks (from 21st to 60th week). There were no remarkable differences in egg production, hen day egg production (HDEP) and average egg weight among three rearing systems. First 20 weeks (phase-1) average HDEP (%) of AV, CC, and BR were 85.9, 88.8, 87.1 and average egg weights (g) were 57.5, 59.9, and 56.9 respectively. Those of the remaining 20 weeks (phase-2) were 87.1, 87.9, 85.5 and 64.2, 63.0 62.1, respectively. Daily feed intakes (122 g, 110 g, 125 g); feed conversion ratio (2.4, 2.1, 2.5) and daily egg mass (53.9 g, 54.4 g, 52.8 g) data from AV, CC, and BR were not influenced significantly by the respective raising systems. Daily feed intake of layers in both AV (124 g) and BR (127 g) tended to be higher than that in CC (113 g) during phase-2. Overall, exterior egg quality (dirty and cracked eggs) in both phases was superior in BR compared with AV and CC, whereas CC generated intermediate results. This study indicated that the HDEP per se in AV and BR were not significantly different from that in CC. The study implied that the facility depreciation cost for AV and cost for increased feed intake in AV compared to CC are believed to be critical to evaluate the cost effectiveness of egg production in AV.

• Molecules and Cells
• /
• v.43 no.4
• /
• pp.360-372
• /
• 2020

The basal ganglia network has been implicated in the control of adaptive behavior, possibly by integrating motor learning and motivational processes. Both positive and negative reinforcement appear to shape our behavioral adaptation by modulating the function of the basal ganglia. Here, we examined a transgenic mouse line (G2CT) in which synaptic transmissions onto the medium spiny neurons (MSNs) of the basal ganglia are depressed. We found that the level of collaterals from direct pathway MSNs in the external segment of the globus pallidus (GPe) ('bridging collaterals') was decreased in these mice, and this was accompanied by behavioral inhibition under stress. Furthermore, additional manipulations that could further decrease or restore the level of the bridging collaterals resulted in an increase in behavioral inhibition or active behavior in the G2CT mice, respectively. Collectively, our data indicate that the striatum of the basal ganglia network integrates negative emotions and controls appropriate coping responses in which the bridging collateral connections in the GPe play a critical regulatory role.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.56 no.6
• /
• pp.31-43
• /
• 2014

Confined and mechanically ventilated broiler house has been recently come into wide use to increase productivity and control rearing conditions. However, high dust concentration inside facility can threaten respiratory welfare of farmers and broilers. In Korea, there is no regulation in terms of air quality control inside agricultural facilities and sufficient data is not available. To cope with these, periodic monitoring of inhalable and respirable dust concentration were conducted according to season, broiler's activity and specific events such as shipment work for broilers in mechanically ventilated broiler house. Chamber experiment was also designed to analyze mechanism of dust generation from ground beds according to water contents and surrounding wind environment. Results showed that significant increase of inhalable (p=0.002) and respirable (p=0.03) dust were observed when activity of broilers was high according to entrance of the workers. Even shipment work for matured broilers, high level of dust were observed; inhalable dust was exceeded the threshold limit over maximum 303 % and respirable dust was over maximum 1,550 %, implying that acute respiratory symptoms could be manifested for the workers. From the chamber experiment, critical water contents for interrupting of dust generation were measured; about 45 % for inhalable dust and about 50 % for respirable dust. These results can be a trigger for designing plan of dust control however it still needs consideration of various environmental conditions, hygiene problems, etc.

• Journal of Embryo Transfer
• /
• v.33 no.4
• /
• pp.281-286
• /
• 2018

Zona pellucida (ZP), a primarily representative coat of mammalian egg and embryo, has an extremely heterogeneous morphology during different developmental stages. The objective of the present study was to compare the morphological changes of the ZP surface of immature, in vitro and in vivo matured canine oocytes by using scanning electron microscopy (SEM). Canine ovaries were collected from local veterinary hospitals to recover immature oocytes. The ovaries were sliced and the released cumulus oocyte complexes (COCs) were washed with TL-HEPES. The selected COCs were randomly divided into two groups, first group was processed immediately at immature state and the second group was processed 72 h after in vitro maturation, and compared with in vivo derived oocytes. Oocytes were fixed, critical point dried and examined under SEM. The diameters of oocyte and outer holes of the ZP were measured on a total of 249 oocytes; the results were analyzed using One-way ANOVA. Our results showed that, the diameter of immature oocytes significantly differed (p < 0.05) from that of in vivo matured oocytes ($79.60{\pm}0.77{\mu}m$ vs. $101.46{\pm}1.07{\mu}m$, respectively). Similarly, a significant difference (p < 0.05) in the diameters between those of in vitro and in vivo matured oocytes were found ($79.51{\pm}2.36{\mu}m$ vs. $101.46{\pm}1.07{\mu}m$, respectively). Moreover, the diameters of the outer holes of the ZP were significantly (p < 0.05) larger in in vivo matured ($1.48{\pm}0.42{\mu}m$) than in vitro matured for 72 and immature oocytes ($1.10{\pm}0.16$ and $0.43{\pm}0.12{\mu}m$, respectively). Taken together, these data indicates that the ZP surface is related to oocyte maturity in canine.

• Korean Journal of Construction Engineering and Management
• /
• v.17 no.4
• /
• pp.76-86
• /
• 2016

Recently, the Contracts of International Construction Business has been decreased from the beginning of 2015 in Korea, although it has been steadily increased until 2014. This trend could be caused by Low-Price Contracts, the lack of Know-how and experience in operating, the poor management of Claims and Low-Profitability in Business. It has been recognized that the qualitative improvement of Business Contacts are necessary for successful Projects. In the Bidding Process, therefore, Experience data as In-House Data and Lessons Learned for projects should be strategically involved to assure riskless offers. Accordingly the Proposal Process are needed to be organized and enhanced by including processes for risks review about technical, marketing and commercial part during the bidding. This paper proposes a Risk Management Process model during Bidding Phase, using Risk Evaluation Method through the project life-cycle. The Concept of Model is to define CSF (Critical Success Factor) in the bidding process and Risk Factors are linked to CSF and Organization based on RAM (Responsibility assignment matrix).

• The Journal of the Convergence on Culture Technology
• /
• v.7 no.3
• /
• pp.27-34
• /
• 2021

The purpose of this study was to investigate the effect of ethical decision making confidence in nursing students and to provide the basic data of to control ethical decision making confidence. Data were collected from 205 nursing students in B city and analyzed by t-test, ANOVA, Pearson correlation coefficient, and multiple regression using SPSS/WIN 22.0. The degree of ethical decision making confidence in nursing students was 3.83±.62. There were significant differences in ethical decision making confidence with respect to gender(t=2.118, p=.037), achivement of life(F=3.851, p=.023). There was positive correlation between ethical decision making confidence and ethical value(r=.153, p=.028), critical thinking disposition(r=.477, p<.001), and professional self concept(r=.566, p<.001). The factors affecting the ethical decision making confidence of the study subjects were critical thinking disposition(β=.254, p<.001), professional self concept(β=.418, p<.001), with an explanatory power of 35.1%. Through this research requires the fellow study to determine the factors affecting ethical decision making confidence of nursing students.