• Journal of Applied Reliability
• /
• v.9 no.1
• /
• pp.47-58
• /
• 2009

In this paper, an accelerated life test procedure for a vacuum cleaner motor is proposed. We investigate the failure mechanism of the motor and select some accelerating factors and determine the orifice size as a key accelerating factor. Three stress levels of orifice size are tested and the failure data with censored data are analyzed. The modified accelerating test will reduce the test time in design phase by using the accelerating factor.

• Proceedings of the KAIS Fall Conference
• /
• 2011.05b
• /
• pp.629-631
• /
• 2011

본 논문에서는 현재 Jazz에서 사용되어지는 화성기법을 Pat Metheny의 작품인 "Bright Size Life"를 통해서 알아보았다. D Major Scale이 선율에 주로 사용된 본 작품은 A 부분에서는 선율이 완전 5도의 음정으로 발전 되었고 B부분에서는 장7도의 음정을 이용하였다. 화성은 중간에 D Minor Scale의 Bb/A가 사용되어서 Modal InterChange기법도 나타나고 있다. B부분에서는 G/A, F/G의 Constant Structure가 나오고 있다.

• Journal of Industrial Technology
• /
• v.20 no.B
• /
• pp.3-8
• /
• 2000

Low cycle fatigue life of spheroidal graphite cast iron is determined by the morphological parameters of internal graphite. The aim of this study is to clarify the effect of the number of nodular grain of spheroidal graphite cast iron on low cycle fatigue life. Two specimens that have identical average nodular grain size by changing nodular grain volume fraction and different number of nodular grain count was tested. In this paper, the parameter governing fatigue life through fatigue test, the number of nodular grain seriously affect fatigue life and nodular grain size is no longer governing parameter of it.

• Proceedings of the Korea Society of Design Studies Conference
• /
• 2003.05a
• /
• pp.214-215
• /
• 2003

• The Journal of the Korea Contents Association
• /
• v.16 no.8
• /
• pp.756-765
• /
• 2016

In order to investigate variables related to the life satisfaction of women from the multi-cultural families, this study collected relevant studies and applied meta-analysis. As a result, it was found, first, their life satisfaction was between the small effect size and the moderate effect size, on the basis of the relevant variables and Cohen's standards(1992). Second, of the sub variables of their individual characteristic variable, Korean proficiency and nationality acquisition were found to be the small effect size. Third, of the sub variables of their psychological variable and multiple culture-related variable, the effect sizes of self-esteem and the receptive attitude towards multiple cultures were found to be between the moderate effect size and the large effect size. Fourth, the sub variables of their social support variable were found to be generally highly correlated with their life satisfaction. Fifth, the sub variables of daily life and spouse-related variables showed very low levels of effect size overall. This study suggested conclusions and limitations of the research based on the results of the above analyses.

• Journal of the Korean Dietetic Association
• /
• v.26 no.2
• /
• pp.153-173
• /
• 2020

The purpose of this study was to objectively quantify the effects of nutrition and dietary life education on preschoolers through meta-analysis. In addition, it provides basic data for the implementation of nutrition education and development of systematic nutrition and dietary life education programs. In this study, a meta-analysis of 27 papers was conducted that conformed to the selection criteria in the study conducted from January 2012 to August 2019 to derive objective data on the effects of education. As a result of the analysis, the overall effective size of nutrition and dietary life education for preschoolers was 0.829, which indicates a strong effect. According to the education method, the effect size of general education was 0.562, which indicates a medium effect size, the vegetable playing-based experience education was 0.685, which indicates a medium effect size, and cooking activity-based experience education was 1.101, which indicates a large effect size. Judging from this result, experience activity education was more effective than general nutrition education. In addition, the combined size of convergence education conducted through a combination of general and experience education was found to be the most effective at 1.301. In terms of educational effect, it was confirmed that the effect size was 0.898 for improving nutrition knowledge, 0.858 for improving dietary habits, 0.836 for improving unbalanced diet, and 0.756 for improving food preference and intake, and the sizes of effects were all found to be large. As frequency of education increased, the number of education participants decreased and the effect of education increased.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.13 no.4
• /
• pp.23-29
• /
• 2004

In this study, four kinds of $Si_3N_4$-based ceramic cutting tools with different sintering time were fabricated to investigate the relation among mechanical properties, grain size and tool life. They were used to turn gray cast iron at a cutting speed of 330m/min and depth of cut of 0.5mm and 1mm in dry, continuos cutting conditions. Multiple linear regression model was used to determine the relations among the mechanical property, grain size and the density. It was found that the combination of hardness and fracture toughness showed a good relation with tool life. It was also shown that hardness was the most important single element for the tool life.

• Korean Journal of Breeding Science
• /
• v.42 no.1
• /
• pp.23-27
• /
• 2010

The objective of this study was to map the gene for reduced embryo size in rice using DNA markers. The reduced embryo size mutant was induced from N-methyl-N-nitrosourea (MNU) treated Taichung 65. Genetic analysis revealed that the phenotype of the reduced embryo was controlled by a single recessive gene, designated as re-1. For mapping the gene controlling embryo size, an $F_2$ population was developed from a cross between the Korean Tongil-type, Milyang 23 (Oryza sativa ssp. indica) and the mutant. The ratio of $F_2$ seeds nearly fitted to 3:1 ratio, indicating that this phenotype was controlled by a single recessive gene. Bulked sergeant analysis was performed with SSR markers. The gene for the reduced embryo size was detected on chromosome 1. The gene was further mapped between two SSR markers, RM315 and RM265 on chromosome 1 (approximately 1.5 Mb interval). The linked markers will facilitate selection of this grain character in a breeding program and provide the foundation for positional cloning of this gene.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.993-996
• /
• 2005

High speed machining(HSM) technique is widely used in the appliance, automobile part and mold industries, which has many advantages such as good quality, low cost and rapid machining time. but it also has problems like tool break, smooth tool path, and so on. In particular, small size end mill is easy to break, so it must be changed before interrupting operation. Generally, the tool life of small size end mill is effected by the milling conditions whose evaluated parameters are spindle, feedrate, and width of cut. The experiments are carried out by full factorial design of experiments using and orthogonal array. This paper shows optimal combination and mathematical model for tool life, and the analysis of variance(ANOVA) is employed to analyze the main effects and the interactions of these milling parameters and the second-order polynomial regression model with three independent variables is estimated to predict tool life by multiple regression analysis.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.2 s.179
• /
• pp.73-80
• /
• 2006

High speed machining(HSM) technique is widely used in the appliance, automobile part and mold industries, because it has many advantages such as good quality, low cost and rapid machining time. But it also has problems such as tool breakage, smooth tool path, and so on. In particular, small size end mill is easy to break, so it must be changed before interrupting operation. Generally, the tool life of small size end mill is affected by the milling conditions whose selected parameters are spindle speed, feedrate, and width of cut. The experiments were carried out by full factorial design of experiments using an orthogonal array. This paper shows optimal combination and mathematical model for tool life, Therefore, the analysis of variance(ANOVA) is employed to analyze the main effects and the interactions of these milling parameters and the second-order polynomial regression model with three independent variables is estimated to predict tool life by multiple regression analysis.